PRV Audio Speakers

4” Midrange – 4 Ohm Ferrite Magnet 90 dB – 60 Watts

4” Midrange – 4 Ohm Neodymium Magnet 91 dB – 60 Watts

5″ Midrange – 8 Ohm Neodymium Magnet 94 dB – 450 Watts

5″ Midrange – 4 Ohm Neodymium Magnet 94 dB – 450 Watts

Ferrite Magnet 94 dB – 400 Watts

6.5” Fullrange – 4 Ohm 2-Way Coaxial 96dB – 380 Watts

6.5″ Fullrange – 8 Ohm Ferrite Magnet 92.5dB – 200 Watts

6.5″ Midbass – 4 Ohm Ferrite Magnet 90 dB – 100 Watts

6.5″ Midbass – 8 Ohm Ferrite Magnet 93.5 dB – 200 Watts

6.5″ Midbass – 4 Ohm Ferrite Magnet 93.5 dB – 200 Watts

6.5″ Midbass – 8 Ohm Ferrite Magnet 94 dB – 400 Watts

6.5” Midbass – 4 Ohm Ferrite Magnet 94 dB – 400 Watts

6.5″ Midbass – 8 Ohm Ferrite Magnet 94.5dB – 550 Watts

6.5″ Midbass – 4 Ohm Ferrite Magnet 94.5dB – 550 Watts

6.5″ Midrange – 8 Ohm Shallow Mount 94 dB – 200 Watts

6.5″ Midrange – 4 Ohm Shallow Mount 94 dB – 200 Watts

6.5″ Midrange – 4 Ohm Shallow Mount 93.5 dB – 250 Watts

6.5″ Midrange – 8 Ohm Sealed Basket 95 dB – 250 Watts

6.5″ Midrange – 4 Ohm High Performance Bullet 95 dB – 400 Watts

6.5” Midrange – 4 Ohm Neodymium Magnet 95.5 dB – 400 Watts

6.5″ Midrange – 8 Ohm Sealed Basket 96 dB – 400 Watts

6.5″ Midrange – 8 Ohm Neodymium Magnet 96 dB – 500 Watts

6.5″ Midrange – 4 Ohm Neodymium Magnet 96 dB – 500 Watts

6.5″ Midrange – 8 Ohm Neodymium Magnet 97.5 dB – 600 Watts

For high output speaker systems, PRV Audio’s 12MB1000FT mid bass is an excellent option capable of amazing performance. A great new addition to the Forte Series, where more power handling and less distortion on mid low mid bass frequencies is the key. All this attention to detail in the 12MB1000FT makes it one impressive driver. With 97.5 dB efficiency and 1000 watts of continuous program power (RMS), this mid bass is ideally suited to be used as a stage monitor, or in auditorium, touring and outdoor systems. Also, its smooth response from 70 to 3,200 Hz makes it perfect for 2 or 3-way designs. Highlights 3″ Inside/Out aluminum voice coil wound on fiberglass former for hi-temp performance, 4 ohms Ventilated voice coil gap reduces power compression High Xmax for more Mid bass output 1,000 watts continuous program power rating makes high acoustical output Excellent performance in 2-way or 3-way systems Weather-resistant paper cone and dust cap A rigid cast aluminum frame with narrow spokes to minimize reflections back into the cone. In addition, the frame includes force cooling system openings which allows airflow to cool the voice coil. To drive the voice coil, a large ferrite magnet with a very precise machined top and bottom plate has been used. The additional dual forced vent in the back plate of the coil allows this driver to handle up to 1000 watts RMS without issue. Features a special high strength pulp composition paper cone designed to achieve the best possible linearity within the middle frequency range, which, together with a protective cone treatment dedicated to enhancing the dampening properties of the moving assembly, considerably improves its smooth frequency response. The voice coil is wound on a 3″ glass fiber with aluminum wire, keeping weight to a minimum for an incredibly quick transient response. Engineered with 19 mm of winding depth, this inside/outside voice coil provides excellent thermal and mechanical durability. GENERAL SPECIFICATIONS Nomi

PRV Audio crossovers are designed and constructed with special attention to both component quality and mechanical rigidity. Not only do our crossovers sound good, they can withstand the use and abuse associated with transportation and of live performances. Our crossovers offer some unique selectable futures: WOOFER IMPEDANCE SELECTIONThis setting allows the same crossover to be used with 8 or 4 Ohms speakers and combinations of them (series or parallel connection) providing you with one solution for multiple cabinet variations. WOOFER ROLL-OFF CROSSOVER ADJUSTMENTSome woofers respond excessively at the cut off frequency than others and need 12 dB/octave filters, where other woofers have a natural roll-off at or near the crossover point, and work well with 6 dB/octave filters. We give you the ability to select this on two of our crossovers: the 2DF1800 two-way crossover and the 3DF400/1800 three-way crossover. SPEAKER ATTENUATIONMatch the output level of the different speakers in your cabinet with the setting; it helps in creating a seamless transition from high to mid to low-especially useful for when driver sensitivities do not match. BRIGHTNESS ADJUSTMENTMany large format compression drivers naturally roll-off above 10 kHz. Our brightness adjustment offsets this phenomenon , applying attenuation below 6 kHz and increasing the energy at high frequencies for more brightness and definition. All crossovers are factory-set with these adjustments in their conventional position, for quick installation and use, but with a little testing and experimentation , we believe that the final sound of your speaker will sound that much better! Highlights Type: Two-Way Crossover Point at 1,800 Hz GENERAL SPECIFICATIONS Type Two-Way Impedance (Ohms) 8 Crossover Point (Hz) 1,800 Woofer Impedance (Ohms) 4/8 Rated AES Power Handling – RMS (Watts) 650 Program Power (Watts) 1,300 Selectable Crossover Point (Hz) – HF Attenuation (dB) 6/7.5/9 Brightness Yes Woofer Octave Sel (dB octave) 6/1

PRV Audio crossovers are designed and constructed with special attention to both component quality and mechanical rigidity. Not only do our crossovers sound good, they can withstand the use and abuse associated with transportation and of live performances. Our crossovers offer some unique selectable futures: WOOFER IMPEDANCE SELECTIONThis setting allows the same crossover to be used with 8 or 4 Ohms speakers and combinations of them (series or parallel connection) providing you with one solution for multiple cabinet variations. WOOFER ROLL-OFF CROSSOVER ADJUSTMENTSome woofers respond excessively at the cut off frequency than others and need 12 dB/octave filters, where other woofers have a natural roll-off at or near the crossover point, and work well with 6 dB/octave filters. We give you the ability to select this on two of our crossovers: the 2DF1800 two-way crossover and the 3DF400/1800 three-way crossover. SPEAKER ATTENUATIONMatch the output level of the different speakers in your cabinet with the setting; it helps in creating a seamless transition from high to mid to low-especially useful for when driver sensitivities do not match. BRIGHTNESS ADJUSTMENTMany large format compression drivers naturally roll-off above 10 kHz. Our brightness adjustment offsets this phenomenon , applying attenuation below 6 kHz and increasing the energy at high frequencies for more brightness and definition. All crossovers are factory-set with these adjustments in their conventional position, for quick installation and use, but with a little testing and experimentation , we believe that the final sound of your speaker will sound that much better! Highlights Type: Three-Way Crossover Point at 400/1,800 Hz GENERAL SPECIFICATIONS Type Three-Way Impedance (Ohms) 8 Crossover Point (Hz) 400/1,800 Woofer Impedance (Ohms) 4/8 Rated AES Power Handling – RMS (Watts) 950 Program Power (Watts) 1,900 Selectable Crossover Point (Hz) – HF Attenuation (dB) 6/7.5/9 Brightness Yes Woofer Octave Sel (dB

Featuring an Aluminum Phase Plug (Bullet), this mid is built like a professional mid range loudspeaker, but it has been designed for use in the mobile audio market! By combining elements from PRO Audio and Car Audio, we have developed a NEW type of high efficient mid range that is able to give high levels of output for your custom door or rear deck. Highlights Built to Perform at Wide Frequency Range: 150 – 12,500 Hz Highest Quality Speaker with bullet design available High efficiency: 96 dB guarantees High Output Levels Handles 500 Watts – Endurance at Loudest Volumes Vented Air pole piece for heat dissipation Center phase plug for even sound distribution 4 Ohms Impedance The “bullet” phase plug is made from pure aluminum acting as a radiator cooling system for the voice coil and machined to perfection for even sound dissipation. Beyond good looks, this cone is extremely light, providing excellent damping to keep an incredibly natural yet accurate sound. A triple roll cloth surround, combined with an optimized fiber pressed paper cone, ensure the speaker’s frequency response is smooth and extends to high range making an easy transition to a super tweeter, but according to customers, the high-frequency response from this speaker does NOT need support from a tweeter! The suspension design of this mid range features a single layer spider – which connects to the coil former with premium stitched lead wires, all being driven by a copper-clad aluminum wire voice coil providing high efficiency and excellent power handling. Its high-performance characteristics and high-quality components provide exceptional clarity, detail, and dynamics sound. You can expect outstanding sound stage quality and realistic sound reproduction for a great value. This is the new standard of value in high-performance bullet speakers. GENERAL SPECIFICATIONS Nominal Diameter 6×9″ (152 x 228 mm) Nominal impedance 4 Ohm Nominal Power Handling* 250 Watts Continuous Program Power (RMS)** 500 Watts Max

Features The PRV Pro Audio Loudspeaker, 6MB200 mid bass woofer, offers outstanding durability and a smooth punch of mid bass for small enclosures. This woofer is perfect for home Hi-Fi installs, including bookshelf, satellite, surround sound speakers and even home studio monitors. The 6MB200 offers very smooth mid range response, up to 4.5 kHz, and is a perfect option for mid range driver replacements in three-way cabinets. The magnet and motor assembly are attached to a sturdy reinforced steel frame, ensuring a solid support structure and long lasting play in most any environment. Its light weight of only 3.3 Lbs helps to keep your enclosures light, making it perfect for car audio applications. Highlights Nominal Impedance: 8 Ohms Rated AES Power Handling (RMS): 100 Watts Program Power: 200 Watts Sensitivity (1W/1m): 93 dB Voice Coil Diameter: 1.5″

The PRV Pro Audio Loudspeaker, 6MB200 v2 mid bass woofer, offers outstanding durability and a smooth punch of mid bass for small enclosures. This woofer is perfect for home Hi-Fi installs, including bookshelf, satellite, surround sound speakers and even home studio monitors. The 6MB200-v2 now has more extended mid range response, up to 6.5 kHz compared to its previous model, and is a perfect option for mid range driver replacements in three-way cabinets. The magnet and motor assembly are attached to a sturdy reinforced steel frame, ensuring a solid support structure and long lasting play in most any environment. Its light weight of only 3.3 Lbs helps to keep your enclosures light, making it perfect for car audio applications. Highlights Nominal Impedance: 8 Ohms Rated AES Power Handling (RMS): 100 Watts Program Power: 200 Watts Sensitivity (1W/1m): 93.5 dB Voice Coil Diameter: 1.5″ GENERAL SPECIFICATIONS Nominal Diameter 6″ (152 mm) Nominal impedance 8 Ohms Rated AES Power Handling (RMS) 100 Watts Program Power 200 Watts Sensitivity 2.83V at 1m 93.5 dB Recommended Hi Pass Crossover****For Full Power Handling 125 Hz****12db Per Octave Crossover Frequency Response at -10dB 125 – 6,500 Hz Voice Coil Diameter 1.5″ (38 mm) Voice Coil Wire Copper Voice Coil Winding Depth 12.5 mm Former Material Kapton Magnetic Gap Depth 5.8 mm Frame Material Stamped Steel

The PRV Pro Audio Loudspeaker, 6MB200 v2 mid bass woofer, offers outstanding durability and a smooth punch of mid bass for small enclosures. This woofer is perfect for home Hi-Fi installs, including bookshelf, satellite, surround sound speakers and even home studio monitors. The 6MB200-v2 now has more extended mid range response, up to 6.5 kHz compared to its previous model, and is a perfect option for mid range driver replacements in three-way cabinets. The magnet and motor assembly are attached to a sturdy reinforced steel frame, ensuring a solid support structure and long lasting play in most any environment. Its light weight of only 3.3 Lbs helps to keep your enclosures light, making it perfect for car audio applications. Highlights Nominal Impedance: 4 Ohms Rated AES Power Handling (RMS): 100 Watts Program Power: 200 Watts Sensitivity (1W/1m): 93.5 dB Voice Coil Diameter: 1.5″ GENERAL SPECIFICATIONS Nominal Diameter 6″ (152 mm) Nominal impedance 4 Ohms Rated AES Power Handling (RMS) 100 Watts Program Power 200 Watts Sensitivity 2.83V at 1m 93.5 dB Recommended Hi Pass Crossover****For Full Power Handling 125 Hz****12db Per Octave Crossover Frequency Response at -10dB 125 – 6,500 Hz Voice Coil Diameter 1.5″ (38 mm) Voice Coil Wire Copper Voice Coil Winding Depth 12.5 mm Former Material Kapton Magnetic Gap Depth 5.8 mm Frame Material Stamped Steel

The 6MR200A mid range speaker is the evolution of the 6MR250A, this unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24″ mounting depth. To ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression. Use this midrange in professional 3-way live sound cabinets, as a high output car audio door speaker, or as a midrange in a bass guitar speaker. Highlights Nominal Impedance: 8 Ohms Rated AES Power Handling (RMS): 100 Watts Program Power: 200 Watts Sensitivity (1W/1m): 94 dB Voice Coil Diameter: 1.5″ GENERAL SPECIFICATIONS Nominal Diameter 6″ (152 mm) Nominal impedance 8 Ohms Rated AES Power Handling (RMS) 100 Watts Program Power 200 Watts Sensitivity 2.83V at 1m 94 dB Recommended Hi Pass Crossover**For Full Power Handling 150 Hz****12db Per Octave Crossover Frequency Response at -10dB 155 – 11,000 Hz Voice Coil Diameter 1.5″ (38 mm) Voice Coil Wire Copper Voice Coil Winding Depth 8.0 mm Former Material Kapton Magnetic Gap Depth 5.5 mm Frame Material Stamped Steel

The 6MR200A mid range speaker is the evolution of the 6MR250A, this unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24″ mounting depth. To ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression. Use this midrange in professional 3-way live sound cabinets, as a high output car audio door speaker, or as a midrange in a bass guitar speaker. Highlights Nominal Impedance: 4 Ohms Rated AES Power Handling (RMS): 100 Watts Program Power: 200 Watts Sensitivity (1W/1m): 94 dB Voice Coil Diameter: 1.5″ GENERAL SPECIFICATIONS Nominal Diameter 6″ (152 mm) Nominal impedance 4 Ohms Rated AES Power Handling (RMS) 100 Watts Program Power 200 Watts Sensitivity 2.83V at 1m 94 dB Recommended Hi Pass Crossover**For Full Power Handling 150 Hz****12db Per Octave Crossover Frequency Response at -10dB 155 – 11,000 Hz Voice Coil Diameter 1.5″ (38 mm) Voice Coil Wire Copper Voice Coil Winding Depth 8.0 mm Former Material Kapton Magnetic Gap Depth 5.5 mm Frame Material Stamped Steel

6.5″ Midbass Speakers 6MB100-4 – PAIR of factory replacement 4 ohms Loudspeakers We have combined the PRO audio and high fidelity audio into a new type of driver aimed at delivering high levels of clean output from stock speaker locations.The 6MB100-4 speakers can be used to transform a stock system into a concert level experience without cutting up interior panels. The shallow mounting depth of 2.32″ is designed for easier installation with its standard frame size that fits in many OEM speaker locations. Highlights Under 2.32″ (60 mm) mounting depth, with compact diameter magnet motor Broad 90 – 10,000 Hz frequency range for ultimate flexibility Nominal Impedance: 4 Ohms – perfect to install from radio outputs Power handling: 50 watts RMS / 200 watts max Sensitivity (1W/1m): 90 dB – Improvement over most stock car audio speakers GENERAL SPECIFICATIONS Nominal Diameter 6″ (152 mm) Nominal impedance 4 Ohms Rated AES Power Handling (RMS) 50 Watts Program Power 100 Watts Sensitivity 2.00V at 1m 90 dB Recommended Hi Pass Crossover**For Full Power Handling 90 Hz** **12db Per Octave Crossover Frequency Response at -10dB 90 – 10,000 Hz Voice Coil Diameter 1.5″ (38 mm) Voice Coil Wire CCAW Voice Coil Winding Depth 8 mm Former Material Kapton Magnetic Gap Depth 5 mm Frame Material Stamped Steel EXTRA INFO Overall Diameter 6.54″ (166 mm) Front Mount Baffle Cutout 5.60″ (142 mm) Mounting Depth 2.32″ (59 mm) Overall Depth 2.55″ (64.7 mm) Net Weight 1.98 Lbs (0.90 kg) Shipping Weight 3.62 Lbs (1.64 kg) Carton Dimensions W x L x H 7.17″ x 14.19″x 3″ (182 x 182 x 105 mm)

PRO Audio 1″ Exit Neodymium Bullet Super Tweeter The PRV Audio TW400Ti-Nd-4 PRO Super Tweeter offers a smooth response and extremely high efficiency from high mid range through high range frequencies. This compact tweeter is part of a wide family from the TW400Ti-Nd Series, featuring a strong neodymium motor which increases its efficiency and lowers its weight ans size dramatically without compromising any performance. Highlights Designed to fit in tight spaces without any major modifications Titanium diaphragm for an accurate and detailed response Designed to add high output, high frequency response to any interior system Hidden push terminal connection, takes less space on installation Built-in capacitors act as a crossover and attenuates the low frequencies for smooth frequency response Able to take a ton of power! Up to 120 watts RMS of power handling are on tap with a 12 dB/octave crossover at 6,000 Hz Sold in Pairs After several months of research and development, we were able to obtain a high level of output from this neodymium motor and an unique diaphragm design for the TW400Ti-Nd Series. Featuring a new concept, easy to replace diaphragm ( solderless ) makes a very easy task to fix your tweeter in few minutes. GENERAL SPECIFICATIONS Nominal impedance 4 Ohms Nominal Power Handling* 60 Watts Continuous Program Power (RMS)** 120 Watts Max Peak Power*** 240 Watts Sensitivity 2.00V at 1m 106 dB Recommended High Pass CrossoverFor Full Power Handling 6000 Hz12db/oct Crossover Frequency Response at -10dB 4,500 – 20,000Hz Voice Coil Diameter 1.0″ (25 mm) Voice Coil Wire CCAW Voice Coil Former Material Kapton Diaphragm Material Titanium Flux Density 1.45 T Magnet Material Neodymium *Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speak

PRV Shallow Car Audio Bullet Tweeter TW400Ti-Nd-4 SLIM WHITE Neodymium 4 Ohm 3″ Rounded – Ultra Slim Easy to Mount Tweeters (Pair) The PRV Audio TW400Ti-Nd-4 SLIM WHITE Super Tweeter offers a smooth response and extremely high efficiency from high mid range through high range frequencies. This compact tweeter is part of a wide family from the TW400Ti-Nd Series, featuring a strong neodymium motor which increases its efficiency and lowers its weight ans size dramatically without compromising any performance. Highlights Designed to fit in tight spaces without any major modifications Titanium diaphragm for an accurate and detailed response Designed to add high output, high frequency response to any interior system Hidden push terminal connection, takes less space on installation Built-in capacitors act as a crossover and attenuates the low frequencies for smooth frequency response Able to take a ton of power! Up to 120 watts RMS of power handling are on tap with a 12 dB/octave crossover at 6,000 Hz Sold in Pairs – Mounting Screws are included, Also available in Black. After several months of research and development, we were able to obtain a high level of output from this neodymium motor and an unique diaphragm design for the TW400Ti-Nd Series. Featuring a new concept, easy to replace diaphragm ( solderless ) makes a very easy task to fix your tweeter in few minutes.Add detail to any speaker with PRV Audio’s TW400Ti-Nd-4 SLIM WHITE 1″ exit titanium compact bullet super tweeter! The titanium diaphragm combines with the durable, yet lightweight, Kapton™ voice coil former for sensitivity levels of up to 105 dB from 4,500 to 20,000 Hz. GENERAL SPECIFICATIONS Nominal impedance 4 Ohms Nominal Power Handling* 60 Watts Continuous Program Power (RMS)** 120 Watts Max Peak Power*** 240 Watts Sensitivity 2.00V at 1m 105 dB Recommended High Pass CrossoverFor Full Power Handling 6000 Hz12db/oct Crossover Frequency Response at -10dB 4,500 – 20,000Hz Voice Coil Diameter 1.0″ (25 mm) Vo

New Evolution of our 1″ exit neodymium bullet tweeters!• Smaller – Motor has been re-designed to be more compact on its total mounting depth.• Improved Designed – Featuring a new concept, easy to replace diaphragm ( solderless ) PRV Audio’s TW400Ti-Nd-4 v2 super tweeter (also referred to as a bullet tweeter) is designed to add high output, high frequency response to any speaker system. The titanium diaphragm combines with the durable, yet lightweight, Kapton™ voice coil former for sensitivity levels of up to 106 dB from 4,500 to 20,000 Hz. Not only does this driver look as good as it sounds, it is also able to take a ton of power! Up to 120 watts of power handling are on tap with a 12 dB/octave crossover at 6,000 Hz to keep up with the most demanding professional audio, high output home audio, and high SPL car audio systems. A capacitor is included for protection from damaging frequencies at high power. Mounting hardware included. GENERAL SPECIFICATIONS Nominal impedance 4 Ohms Nominal Power Handling* 60 Watts Continuous Program Power (RMS)** 120 Watts Max Peak Power*** 240 Watts Sensitivity 2.00V at 1m 106 dB Recommended High Pass CrossoverFor Full Power Handling 6000 Hz12db/oct Crossover Frequency Response at -10dB 4,500 – 20,000Hz Voice Coil Diameter 1.0″ (25.4 mm) Voice Coil Wire Aluminum Voice Coil Former Material Kapton Diaphragm Material Titanium Flux Density 1.45 T Magnet Material Neodymium *Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to avoid a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed j

Add detail to any speaker with PRV Audio’s TW700Ti titanium bullet super tweeter! With high frequency response up to 20,000 Hz and a sensitivity of 107 dB at 1W/1m, the TW700Ti can keep up with even the most demanding speaker systems. Flat sides allow for close side by side mounting. Double magnet that efficiently increases the magnetic field into the gap, delivering high sensitivity and low distortion. High Frequency Bullet Tweeter, capable of adding brilliance and articulation to any professional loudspeaker system. Highlights Type: Super Tweeter Nominal Impedance: 8Ω Rated AES Power Handling (RMS): 120 Watts Program Power: 240 Watts Voice Coil Diameter: 1.5″ GENERAL SPECIFICATIONS Nominal impedance 8 Ohms Rated AES Power Handling (RMS) 120 Watts Program Power 240 Watts Sensitivity 2.83V at 1m 107 dB Recommended Hi Pass Crossover****For Full Power Handling 5000 Hz****12db Per Octave Crossover Frequency Response at -10dB 3,500 – 20,000 Hz Voice Coil Diameter 1.5”(38 mm) Voice Coil Wire CCAW Voice Coil Former Material Kapton Diaphragm Material Titanium Flux Density 1.60 T Magnet Material Ferrite EXTRA INFO Overall Depth 2.97” (75.54 mm) Mounting Depth 2.55” (64.9 mm) Overall Width 4.05” (103 mm) Overall Height 4.05” (103 mm) Cutout Diameter 3.58” (91 mm) Net Weight 3.48 lbs (1.58 kg) Shipping Weight 3.62 lbs (1.64 kg) Carton Dimensions W x L x H 4.5” x 4.5” x 3.25”(114 x 114 x 82.5 mm)

Rated 4.80 out of 5 Ferrite Magnet 105 dB – 120 Watts