Home/Equipment/Subwoofers/Sundown Audio

Z-Series ZV7 15" Subwoofer

The Z v.7 is the third step up in Sundown's 2025 "ultra-high excursion" sub-woofer lineup after the M and X v.4 series. All models (12,15,18) feature our custom tooled and patented frames (US Patent Numbers D691597, D691598, and D741841) – the Sundown “mega-platform.” Please note – the Z v.7 is , aside from special orders, in 10s due to the motor size. We mate these new platform frames to a quad stacked 265mm (10.43”) diameter motor structure with a total magnet stack height of 100mm (3.94”) featuring a hyper-extended pole and extreme clearances (allowing over 4" p-p travel before mechanical bottom effectively making it bottomless). This is, by far, the largest motor we have ever produced on a Z series sub-woofer. The motor force factor (BL^2/RE) is ~50% higher than the previous generation Z v.6 series. This motor drives a 3.3" diameter 4-Layer Round Wire Aluminum Voice Coil wound on a thick aluminum former. These new round wire coils use a special Sundown designed “fat wire” winding method to handle significant amounts of power and abuse. Based on Sundown's years of experience with the Z v.4, 5, and 6 series we've also improved the voice coil ventilation yet again. The Z v.7 features an entirely new and patent-pending airflow directing pole cap, six pole OD channels, SIXTEEN gap vents, and a cross-drilled / slotted top plate to keep the voice coil running cool under extreme conditions. The Z v.7 motor also features a 9mm thick magnet ID Faraday ring which is locked into both the top and back plates. This ring combined with an all-new pole-extension inductance sleeve gives the Z v.7 the most linear inductive performance of any mega-platform sub-woofer to date. As if all of this were not enough to cement the Z v.7as a legend... we were also able to achieve 42mm of one-way linear excursion by 70% BL with an extremely uniform curve via our extensively FEA optimized motor and 95mm long voice-coil winding length. The Z v.7 series was designed from the ground-up to become the new standard in the low-frequency / small, ported box sub-woofer category in this price range. They will work in the same enclosures that are commonly used for Sundown Audio's mega-platform sub-woofers. The Z v.7 series, like its other mega-platform brethren, is really a different kind of woofer due to its incredibly linear suspension. They are designed for the LOWEST level of bass extension possible in a small enclosure while maintaining extremely low levels of distortion.

Specifications

rms watts
3500 W
peak watts
7000 W
Thiele-Small Parameters

Measured at small signal levels per AES standards

Impedance:
Electromechanical
Re
1 Ω
Excursion
Xmax
42 mm

Parameters measured per AES2-1984 (r2003) standards. Small-signal parameters valid within linear operating region.

Also check Amazon

Search for this product on Amazon

Price and availability may vary. Click to verify current pricing.

Need this installed?

Browse 42+ professional car audio installers in our network

Find an Installer

Frequently Asked Questions

What is the Sundown Audio Z-Series ZV7 15" Subwoofer?

The Sundown Audio Z-Series ZV7 15" Subwoofer is a car audio equipment made by Sundown Audio. View full specifications and where to buy on this page.

How much does the Sundown Audio Z-Series ZV7 15" Subwoofer cost?

The Sundown Audio Z-Series ZV7 15" Subwoofer typically sells for $90 to $3000 depending on the retailer and variant. Check the "Where to Buy" section for current pricing from authorized dealers.

Where can I buy the Sundown Audio Z-Series ZV7 15" Subwoofer?

You can purchase the Sundown Audio Z-Series ZV7 15" Subwoofer from authorized dealers listed in the "Where to Buy" section on this page. We recommend buying from authorized retailers to ensure warranty coverage and genuine products.

Customer Reviews

-

0 reviews

5
0
4
0
3
0
2
0
1
0

Sign in to write a review

Loading reviews...

No Builds Yet

Be the first to showcase a build with this Subwoofer!