
SLAPZ Audio is an American car audio brand founded in 2022 by Alan Edwards, a 25-year veteran of the car audio industry. Based in Ambler, Pennsylvania, the company was created to provide beginner and novice bass enthusiasts with budget-friendly products and responsive customer support. Their product line includes monoblock amplifiers ranging from 2000W to 8000W, neodymium and ferrite subwoofers in sizes from 8" to 18", and tweeters. Popular models include the Shock amplifier series and the Smackdown and Oblivion subwoofer lines. Edwards brings competitive experience from IASCA dB drag events in the late 1990s to SLAPZ Audio's product development.

The Slapz Audio 2K.1D is a high-performance car audio amplifier featuring Class D topology. This 4-channel amplifier delivers 2000W RMS. Built for reliable power delivery and superior sound quality.

The Slapz Audio 2K.4D is a high-performance car audio amplifier. This 4-channel amplifier. Built for reliable power delivery and superior sound quality.

The Slapz Audio 3K.1D is a high-performance car audio amplifier delivers 3000W RMS. Built for reliable power delivery and superior sound quality.

The Slapz Audio 5K.1D is a high-performance car audio amplifier. Built for reliable power delivery and superior sound quality.

The Slapz Audio 8k.1D is a high-performance car audio amplifier. Built for reliable power delivery and superior sound quality.

The Slapz Audio Mini 160 is a high-performance car audio amplifier. This 4-channel amplifier. Built for reliable power delivery and superior sound quality.

640 watt 4 channel amplifier (160x4 @ 2ohm).

The Slapz Audio SCD2K.1 is a high-performance car audio amplifier featuring Class D topology. Built for reliable power delivery and superior sound quality.

SLAPZ Audio Class D (SCD2K.1) 2000 watt x1, 1 ohm mono class D amplifier with bass knob. 0 gauge inputs Dual 8 gauge speaker outputs Clip & Protection indicator on amplifier RMS @ 1 ohm 2000w RMS @ 2 ohm 1200w RMS @ 4 ohm 800w Frequency Response 10HZ- 20KHZ S/N Ratio >90db HPF 10HZ - 80HZ LPF 80HZ - 15khz Bass Boost Level 0 - 10DB Input Sensitivity 0.3 - 5v Max Current Draw 200a Supply Voltage Range 10v - 16V Minimum impedance 1 OHM *Cannot be strapped* 15 Day Return Policy Amplifier must be in original new condition with original box including manual and transfer stickers in good condition. The customer is responsible for return shipping costs. Warranty THIS AMPLIFIER IS NOT .5 OHM STABLE. Running this amplifier at .5 ohm will likely blow mosfets and burn the board. No warranty will be given when the board is burnt NO EXCEPTIONS. Product defect Warranty period is 1 year from the date of purchase. If you burn the amplifier’s mosfet, or burn the amplifiers board we know this is from either improper voltage, improper wiring, or playing while clipping which can result in burning the PCB board which is not covered under warranty. NO EXCEPTIONS. This warranty does not cover improper installation, accidental damage, misuse, abuse, improper wiring, operation of unit outside of specification, or any product that has been modified or repaired by anyone other than SLAPZ Car Audio. Your warranty covers defects in materials and/or workmanship ONLY and is not an insurance policy. The warranty only covers the original owner of the amplifier. You are responsible for the cost of shipping your amplifier back to us for warranty examination. If your amplifier is covered under warranty shipping back to you will be no charge – if your amplifier is replaced/repaired outside of warranty or if no defect is found and your product must be returned to you then shipping will be billed to you. At the sole discretion of Slapz Car Audio your amplifier will be either repaired or replaced when it is being covered under warranty. In the event of shipping damage due to improper packaging on products being returned to Slapz Car Audio the customer is liable for the cost of all damages, necessary repairs, or replacement. SLAPZ car audio is not responsible for hearing loss. Wiring tutorial Wiring and installation best practice videos are available on our YouTube page and Facebook page and must be followed. We just want our customers to enjoy bass as much as we do, please help us to achieve this goal.

The Slapz Audio SCD3K.1 is a high-performance car audio amplifier. Built for reliable power delivery and superior sound quality.

SLAPZ Audio Class D (SCD3K.1) 3000 watt x1, 1 ohm mono class D amplifier with bass knob. 0 gauge inputs Dual 8 gauge speaker outputs Clip & Protection indicator on amplifier RMS @ 1 ohm 3000w RMS @ 2 ohm 1800w RMS @ 4 ohm 1200w Frequency Response 10HZ- 20KHZ S/N Ratio >90db HPF 10HZ - 80HZ LPF 80HZ - 15khz Bass Boost Level 0 - 10DB Input Sensitivity 0.3 - 5v Max Current Draw 300a Supply Voltage Range 10v - 16V Minimum impedance 1 ohm *Cannot be strapped* *THIS AMPLIFIER REQUIRES UPGRADED ELECTRICAL (1\O OFC, LITHIUM SUPPORT, & AN UPGRADED ALTERNATOR) IF THIS AMPLIFIER IS INSTALLED WITHOUT THESE NECESSARY UPGRADES NO WARRANTY WILL BE GIVEN NO EXEMPTIONS* *DO NOT USE LIFEPO4 LITHIUM BANKS MEANT FOR RV’s WITH A LOW CHARGE/DISCHARGE RATE. THIS WILL VOID YOUR AMP’S WARRANTY* 15 Day Return Policy Amplifier must be in original new condition with original box including manual and transfer stickers in good condition. The customer is responsible for return shipping costs. Warranty THIS AMPLIFIER IS NOT .5 OHM STABLE. Running this amplifier at .5 ohm will likely blow mosfets and burn the board. No warranty will be given when the board is burnt NO EXCEPTIONS. Product defect Warranty period is 1 year from the date of purchase. If you burn the amplifier’s mosfet, or burn the amplifiers board we know this is from either improper voltage, improper wiring, or playing while clipping which can result in burning the PCB board which is not covered under warranty. NO EXCEPTIONS. This warranty does not cover improper installation, accidental damage, misuse, abuse, improper wiring, operation of unit outside of specification, or any product that has been modified or repaired by anyone other than SLAPZ Car Audio. Your warranty covers defects in materials and/or workmanship ONLY and is not an insurance policy. The warranty only covers the original owner of the amplifier. You are responsible for the cost of shipping your amplifier back to us for warranty examination. If your amplifier is covered under warranty shipping back to you will be no charge – if your amplifier is replaced/repaired outside of warranty or if no defect is found and your product must be returned to you then shipping will be billed to you. At the sole discretion of Slapz Car Audio your amplifier will be either repaired or replaced when it is being covered under warranty. In the event of shipping damage due to improper packaging on products being returned to Slapz Car Audio the customer is liable for the cost of all damages, necessary repairs, or replacement. SLAPZ car audio is not responsible for hearing loss. Wiring tutorial Wiring and installation best practice videos are available on our YouTube page and Facebook page and must be followed. We just want our customers to enjoy bass as much as we do, please help us to achieve this goal.

The Slapz Audio SCD5K.1 is a high-performance car audio amplifier featuring Class D topology delivers 5000W RMS. Built for reliable power delivery and superior sound quality.

SLAPZ Audio Class D (SCD5K.1) 5000 watt x1 at 1 ohm mono class D amplifier with bass knob Half bridge (BTL) Full bridge design, this BTL (bridge tied load) amplifier configuration is achieved by combining two internal half-bridge circuits in a larger, more robust, design. 5000 watt mono block amplifier Dual 0 gauge inputs 6 gauge speaker outputs Clip & Protection indicator on amplifier RMS @ 1 ohm 5000w RMS @ 2 ohm 2800w RMS @ 4 ohm 1800w Frequency Response 10HZ- 20KHZ S/N Ratio >90db HPF 10HZ - 80HZ LPF 80HZ - 15khz Bass Boost Level 0 - 10DB Input Sensitivity 0.3 - 5v Max Current Draw 500 amp Supply Voltage Range 10v - 16V Minimum impedance 1 ohm Built in clip limiter *Cannot be strapped* ****Differences between our Shock series full bridge and our SCD5k Half bridge BTL full bridge is as follows. Our Shock series "Brazilian style full bridge" uses a single-unit full-bridge design for compactness and efficiency, while a "half bridge BTL full bridge" achieves the BTL configuration by combining two internal half-bridge circuits (strapped) in a larger, more robust, design. Only the SCD5k utilizes this hybrid design in our amplifier lineup**** *THIS AMPLIFIER REQUIRES UPGRADED ELECTRICAL (1\O OFC, LITHIUM SUPPORT, & AN UPGRADED ALTERNATOR) IF THIS AMPLIFIER IS INSTALLED WITHOUT THESE NECESSARY UPGRADES NO WARRANTY WILL BE GIVEN NO EXEMPTIONS* *DO NOT USE LIFEPO4 LITHIUM BANKS MEANT FOR RV’s WITH A LOW CHARGE/DISCHARGE RATE. THIS WILL VOID YOUR AMP’S WARRANTY* 15 Day Return Policy Amplifier must be in original new condition with original box including manual and transfer stickers in good condition. The customer is responsible for return shipping costs. Warranty THIS AMPLIFIER IS NOT .5 OHM STABLE. Running this amplifier at .5 ohm will likely blow mosfets and burn the board. No warranty will be given when the board is burnt NO EXCEPTIONS. Product defect Warranty period is 1 year from the date of purchase. If you burn the amplifier’s mosfet, or burn the amplifiers board we know this is from either improper voltage, improper wiring, or playing while clipping which can result in burning the PCB board which is not covered under warranty. NO EXCEPTIONS. This warranty does not cover improper installation, accidental damage, misuse, abuse, improper wiring, operation of unit outside of specification, or any product that has been modified or repaired by anyone other than SLAPZ Car Audio. Your warranty covers defects in materials and/or workmanship ONLY and is not an insurance policy. The warranty only covers the original owner of the amplifier. You are responsible for the cost of shipping your amplifier back to us for warranty examination. If your amplifier is covered under warranty shipping back to you will be no charge – if your amplifier is replaced/repaired outside of warranty or if no defect is found and your product must be returned to you then shipping will be billed to you. At the sole discretion of Slapz Car Audio your amplifier will be either repaired or replaced when it is being covered under warranty. In the event of shipping damage due to improper packaging on products being returned to Slapz Car Audio the customer is liable for the cost of all damages, necessary repairs, or replacement. SLAPZ car audio is not responsible for hearing loss. Wiring tutorial Wiring and installation best practice videos are available on our YouTube page and Facebook page and must be followed. We just want our customers to enjoy bass as much as we do, please help us to achieve this goal.

Class D 2000 watt 4 channel amplifier (500x4 @ 2ohm).

SLAPZ Audio SHOCK Series (Shock 3k.1D) VERSION 2, 3000 watt x1, 1 ohm mono full bridge digital class D amplifier bass knob included with built in clip indicator. Take your car’s audio system to a new level with the SLAPZ Audio Shock 3K.1D amplifier. With its built in versatile Low pass filter and high pass filter this amplifier can be used for subwoofers and mid bass speakers. Dual 0 gauge inputs Remote output Dual 8 gauge speaker outputs RMS @ 1 ohm 3000w RMS @ 2 ohm 1600w RMS @ 4 ohm 1100w S/N Ratio >105DB HPF 15HZ - 80HZ LPF 40HZ - 10khz Bass Boost Level 0 - 12DB Input Sensitivity 0.2 - 5v Max Current Draw 300a Supply Voltage Range 9v - 16V Tiffany RCA input and output Dimensions 7.3”wX8.65”hX2.65”h *THIS AMPLIFIER REQUIRES UPGRADED ELECTRICAL (1\O OFC, LITHIUM SUPPORT, & AN UPGRADED ALTERNATOR) IF THIS AMPLIFIER IS INSTALLED WITHOUT THESE NECESSARY UPGRADES NO WARRANTY WILL BE GIVEN NO EXEMPTIONS* *DO NOT USE LIFEPO4 LITHIUM BANKS MEANT FOR RV’s WITH A LOW CHARGE/DISCHARGE RATE. THIS WILL VOID YOUR AMP’S WARRANTY* 15 Day Return Policy Amplifier must be in original new condition with original box including manual and transfer stickers in good condition. The customer is responsible for return shipping costs. Warranty THIS AMPLIFIER IS NOT .5 OHM STABLE. Running this amplifier at .5 ohm will likely blow mosfets and burn the board. No warranty will be given when the board is burnt NO EXCEPTIONS Product defect Warranty period is 1 year from the date of purchase. If you burn the amplifier’s mosfet, or burn the amplifiers board we know this is from either improper voltage, improper wiring, or playing while clipping which can result in burning the PCB board which is not covered under warranty. NO EXCEPTIONS. This warranty does not cover improper installation, accidental damage, misuse, abuse, improper wiring, operation of unit outside of specification, or any product that has been modified or repaired by anyone other than SLAPZ Car Audio. Your warranty covers defects in materials and/or workmanship ONLY and is not an insurance policy. The warranty only covers the original owner of the amplifier. You are responsible for the cost of shipping your amplifier back to us for warranty examination. If your amplifier is covered under warranty shipping back to you will be no charge – if your amplifier is replaced/repaired outside of warranty or if no defect is found and your product must be returned to you then shipping will be billed to you. At the sole discretion of Slapz Car Audio your amplifier will be either repaired or replaced when it is being covered under warranty. In the event of shipping damage due to improper packaging on products being returned to Slapz Car Audio the customer is liable for the cost of all damages, necessary repairs, or replacement. SLAPZ car audio is not responsible for hearing loss. Wiring tutorial Wiring and installation best practice videos are available on our YouTube page and Facebook page and must be followed. We just want our customers to enjoy bass as much as we do, please help us to achieve this goal.

SLAPZ Audio SHOCK Series (Shock 5k.1D) 5000 watt x1, 1 ohm mono full bridge digital class D amplifier bass knob included with built in clip indicator. (Amp to be used for subwoofers only) Dual 0 gauge inputs Dual 8 gauge speaker outputs RMS @ 1 ohm 5000w RMS @ 2 ohm 3600w RMS @ 4 ohm 2120w Frequency Response 15HZ- 20KHZ S/N Ratio >90db HPF 15HZ - 80HZ LPF 80HZ - 25KHZ Bass Boost Level 0 - 15db Input Sensitivity 0.3 - 6v Max Current Draw 450a Supply Voltage Range 9v - 16V Tiffany RCA input and output Heat Sink Dimensions 10.5”x8.5”x2.75” *THIS AMPLIFIER REQUIRES UPGRADED ELECTRICAL (1\O OFC, LITHIUM SUPPORT, & AN UPGRADED ALTERNATOR) IF THIS AMPLIFIER IS INSTALLED WITHOUT THESE NECESSARY UPGRADES NO WARRANTY WILL BE GIVEN NO EXEMPTIONS* *DO NOT USE LIFEPO4 LITHIUM BANKS MEANT FOR RV’s WITH A LOW CHARGE/DISCHARGE RATE. THIS WILL VOID YOUR AMP’S WARRANTY* 15 Day Return Policy Amplifier must be in original new condition with original box including manual and transfer stickers in good condition. The customer is responsible for return shipping costs. Warranty THIS AMPLIFIER IS NOT .5 OHM STABLE. Running this amplifier at .5 ohm will likely blow mosfets and burn the board. No warranty will be given when the board is burnt NO EXCEPTIONS Product defect Warranty period is 1 year from the date of purchase. If you burn the amplifier’s mosfet, or burn the amplifiers board we know this is from either improper voltage, improper wiring, or playing while clipping, which can result in burning the amplifiers PCB board which is not covered under warranty. NO EXCEPTIONS. This warranty does not cover improper installation, accidental damage, misuse, abuse, improper wiring, operation of unit outside of specification, or any product that has been modified or repaired by anyone other than SLAPZ Car Audio. Your warranty covers defects in materials and/or workmanship ONLY and is not an insurance policy. The warranty only covers the original owner of the amplifier. You are responsible for the cost of shipping your amplifier back to us for warranty examination. If your amplifier is covered under warranty shipping back to you will be no charge – if your amplifier is replaced/repaired outside of warranty or if no defect is found and your product must be returned to you then shipping will be billed to you. At the sole discretion of Slapz Car Audio your amplifier will be either repaired or replaced when it is being covered under warranty. In the event of shipping damage due to improper packaging on products being returned to Slapz Car Audio the customer is liable for the cost of all damages, necessary repairs, or replacement. SLAPZ car audio is not responsible for hearing loss. Wiring tutorial Wiring and installation best practice videos are available on our YouTube page and Facebook page and must be followed. We just want our customers to enjoy bass as much as we do, please help us to achieve this goal. Required: Upgraded Electrical Charging System You will need to have The Big Three wiring upgrade, at least one 250 Amp high-output alternator, and at least one secondary battery with 500 Ah of AGM or 80 Ah of Lithium to run this 5000w monoblock.

Full Bridge 8000W mono block amplifier

SLAPZ car audio SHOCK Series Shock 8k.1D Version 2 Full bridge digital Class D 8000 watt 1 ohm mono block amplifier bass knob included with built in clip indicator Dual 0 gauge inputs Dual 8 gauge speaker outputs Dual 0 gauge inputs Dual 8 gauge speaker outputs RMS @ 1 ohm 8000w RMS @ 2 ohm 4600w RMS @ 4 ohm 2600w Frequency Response 15HZ- 20KHZ S/N Ratio >105Db HPF 15HZ - 80HZ LPF 40HZ - 10KHZ Bass Boost Level 0 - 12db Bass Boost Frequency 35-70HZ Input Sensitivity 0.2 - 5v Max Current Draw 700 amp Supply Voltage Range 9v - 16V Tiffany RCA input and output *THIS AMPLIFIER REQUIRES UPGRADED ELECTRICAL (1\O OFC, LITHIUM SUPPORT, & AN UPGRADED ALTERNATOR) IF THIS AMPLIFIER IS INSTALLED WITHOUT THESE NECESSARY UPGRADES NO WARRANTY WILL BE GIVEN NO EXEMPTIONS* *DO NOT USE LIFEPO4 LITHIUM BANKS MEANT FOR RV’s WITH A LOW CHARGE/DISCHARGE RATE. THIS WILL VOID YOUR AMP’S WARRANTY* 15 Day Return Policy Amplifier must be in original new condition with original box including manual and transfer stickers in good condition. The customer is responsible for return shipping costs. Warranty THIS AMPLIFIER IS NOT .5 OHM STABLE. Running this amplifier at .5 ohm will likely blow mosfets and burn the board. No warranty will be given when the board is burnt NO EXCEPTIONS Product defect Warranty period is 1 year from the date of purchase. If you burn the amplifier’s mosfet, or burn the amplifiers board we know this is from either improper voltage, improper wiring, or playing while clipping. We know what to look for and we will not repair or replace. NO EXCEPTIONS. This warranty does not cover improper installation, accidental damage, misuse, abuse, improper wiring, operation of unit outside of specification, or any product that has been modified or repaired by anyone other than SLAPZ Car Audio. Your warranty covers defects in materials and/or workmanship ONLY and is not an insurance policy. The warranty only covers the original owner of the amplifier. You are responsible for the cost of shipping your amplifier back to us for warranty examination. If your amplifier is covered under warranty shipping back to you will be no charge – if your amplifier is replaced/repaired outside of warranty or if no defect is found and your product must be returned to you then shipping will be billed to you. At the sole discretion of Slapz Car Audio your amplifier will be either repaired or replaced when it is being covered under warranty. In the event of shipping damage due to improper packaging on products being returned to Slapz Car Audio the customer is liable for the cost of all damages, necessary repairs, or replacement. SLAPZ car audio is not responsible for hearing loss. Wiring tutorial Wiring and installation best practice videos are available on our YouTube page and Facebook page and must be followed. We just want our customers to enjoy bass as much as we do, please help us to achieve this goal. . Required: Upgraded Electrical Charging System You will need to have The Big Three wiring upgrade, at least one 250 Amp high-output alternator, and at least one secondary battery with 500 Ah of AGM or 80 Ah of Lithium to run this 8000w monoblock.

SLAPZ Audio Mini 160.4 640 watt 4 channel amplifier (160x4 @ 2ohm) Working Voltage 9~16V 4 0hm (RMS) 4x100W 2 Ohm (RMS) 4×160W Bridged 4 Ohm (RMS) 2x320W Frequency Response(-3DB) 10HZ~30000HZ Damping factor > 100 Crossover Modes HPF/FULL/LPF High pass frequency 50Hz~5000HZ Low Pass Frequency 50HZ-5000HZ Signal To Noise Ratio >105DB Input Sensitivity 0.3~6V THD&N <0.01% Fuse 2x 35amp Size 7” x 5.3” x 2” Weight 2.8 LBS 15 Day Return Policy Amplifier must be in original new condition with original box including manual and transfer stickers in good condition. The customer is responsible for return shipping costs. Warranty Product defect Warranty period is 1 year from the date of purchase. If you burn the amplfier’s mosfet, or burn the amplifiers board we know this is from either improper voltage, improper wiring, or playing while clipping which can result in burning the PCB board which is not covered under warranty. NO EXCEPTIONS. This warranty does not cover improper installation, accidental damage, misuse, abuse, improper wiring, operation of unit outside of specification, or any product that has been modified or repaired by anyone other than SLAPZ Car Audio. Your warranty covers defects in materials and/or workmanship ONLY and is not an insurance policy. The warranty only covers the original owner of the amplifier. You are responsible for the cost of shipping your amplifier back to us for warranty examination. If your amplifier is covered under warranty shipping back to you will be no charge – if your amplifier is replaced/repaired outside of warranty or if no defect is found and your product must be returned to you then shipping will be billed to you. At the sole discretion of Slapz Car Audio your amplifier will be either repaired or replaced when it is being covered under warranty. In the event of shipping damage due to improper packaging on products being returned to Slapz Car Audio the customer is liable for the cost of all damages, necessary repairs, or replacement. SLAPZ car audio is not responsible for hearing loss. Wiring tutorial Wiring and installation best practice videos are available on our YouTube page and Facebook page and must be followed. We just want our customers to enjoy bass as much as we do, please help us to achieve this goal.

SLAPZ Audio Mini 5 640 watt + 1x500 W @ 1 ohm 5 channel amplifier (160x4 @ 2ohm/500x1 @ 1 ohm Working Voltage 9~16V 4 0hm (RMS) 4x100W + Mono 1x160W 2 Ohm (RMS) 4×160W + Mono 1x300W Bridged 4 Ohm (RMS) 2x320W Mono channel @ 1 ohm 1x500W Frequency Response(-3DB) 10HZ~30000HZ Damping factor > 100 Crossover Modes HPF/FULL/LPF High pass frequency 50Hz~5000HZ Low Pass Frequency 50HZ-5000HZ Bass Boost 0-12DB Signal To Noise Ratio >105DB Input Sensitivity 0.3~6V THD&N <0.01% Fuse 2x 40amp Size 9.4” x 5.3” x 2” Weight 4.3 LBS 15 Day Return Policy Amplifier must be in original new condition with original box including manual and transfer stickers in good condition. The customer is responsible for return shipping costs. Warranty Product defect Warranty period is 1 year from the date of purchase. If you burn the amplfier’s mosfet, or burn the amplifiers board we know this is from either improper voltage, improper wiring, or playing while clipping which can result in burning the PCB board which is not covered under warranty. NO EXCEPTIONS. This warranty does not cover improper installation, accidental damage, misuse, abuse, improper wiring, operation of unit outside of specification, or any product that has been modified or repaired by anyone other than SLAPZ Car Audio. Your warranty covers defects in materials and/or workmanship ONLY and is not an insurance policy. The warranty only covers the original owner of the amplifier. You are responsible for the cost of shipping your amplifier back to us for warranty examination. If your amplifier is covered under warranty shipping back to you will be no charge – if your amplifier is replaced/repaired outside of warranty or if no defect is found and your product must be returned to you then shipping will be billed to you. At the sole discretion of Slapz Car Audio your amplifier will be either repaired or replaced when it is being covered under warranty. In the event of shipping damage due to improper packaging on products being returned to Slapz Car Audio the customer is liable for the cost of all damages, necessary repairs, or replacement. SLAPZ car audio is not responsible for hearing loss. Wiring tutorial Wiring and installation best practice videos are available on our YouTube page and Facebook page and must be followed. We just want our customers to enjoy bass as much as we do, please help us to achieve this goal.

SLAPZ Audio Shock 2K.1D Class D 2000 watt 4 channel amplifier (500x4 @ 2ohm) 1/0 input power & Ground Tiffany style RCA inputs Working Voltage 9~16v 4 0hm (RMS) 4x300W 2 Ohm (RMS) 4×500W Bridged 4 Ohm (RMS) 2x1000W Full Frequency Range 10Hz-20KHZ High pass frequency 15Hz~6KHz Low Pass Frequency(-3DB) 50Hz~2KHz Raise the frequency of low pass 0~15DB Bass Boost Frequency 35-70Hz Signal To Noise Ratio >105DB Input Sensitivity 0.2~5v THD&Noise <1% Fuse 200 Amp Size 9.5” x 8” x 2.65” Weight 8.3LBS 15 Day Return Policy Amplifier must be in original new condition with original box including manual and transfer stickers in good condition. The customer is responsible for return shipping costs. Warranty Product defect Warranty period is 1 year from the date of purchase. If you burn the amplifier’s mosfet, or burn the amplifiers board we know this is from either improper voltage, improper wiring, or playing while clipping which can result in burning the PCB board which is not covered under warranty. NO EXCEPTIONS. This warranty does not cover improper installation, accidental damage, misuse, abuse, improper wiring, operation of unit outside of specification, or any product that has been modified or repaired by anyone other than SLAPZ Car Audio. Your warranty covers defects in materials and/or workmanship ONLY and is not an insurance policy. The warranty only covers the original owner of the amplifier. You are responsible for the cost of shipping your amplifier back to us for warranty examination. If your amplifier is covered under warranty shipping back to you will be no charge – if your amplifier is replaced/repaired outside of warranty or if no defect is found and your product must be returned to you then shipping will be billed to you. At the sole discretion of Slapz Car Audio your amplifier will be either repaired or replaced when it is being covered under warranty. In the event of shipping damage due to improper packaging on products being returned to Slapz Car Audio the customer is liable for the cost of all damages, necessary repairs, or replacement. SLAPZ car audio is not responsible for hearing loss. Wiring tutorial Wiring and installation best practice videos are available on our YouTube page and Facebook page and must be followed. We just want our customers to enjoy bass as much as we do, please help us to achieve this goal.