Ampere Audio Amplifiers

Unleash Competition-Level Power with the Ampere Audio AA-12K Car Amplifier In the world of car audio competitions, power and control are everything. Whether you're pushing the limits at SPL events or showcasing your system at high-volume demos, you need an amplifier that delivers raw output with precision. Many competitors struggle to find a car amplifier that offers both massive power and consistent performance without overheating or distorting at high volumes. The Ampere Audio AA-12K solves this problem with a design engineered specifically for those who demand domination in every decibel. Why Power Alone Isn’t Enough If you’ve ever pushed an underpowered amplifier to its limits, you’ve likely experienced overheating, signal clipping, or uneven output. These issues not only affect your performance but can also damage your gear over time. For SPL competitors and serious car audio enthusiasts, the challenge isn’t just finding an amplifier — it’s finding one that performs at peak levels without compromise. That’s where the AA-12K from Ampere Audio steps in. Designed with both strength and intelligence, it’s not just about loudness — it’s about clean, controlled, and efficient power delivery. Built for Serious Competitors The AA-12K is a Class D monoblock amplifier built to produce up to 12,000 watts RMS at 1 ohm. When strapped, it delivers an astonishing 24,000 watts, giving competitors an edge in the lanes. Whether you're aiming to flex at demo meets or crush it in SPL competitions, this amplifier delivers the brute force needed to drive your subs — and dominate the soundstage. Key features include:         Dual MOSFET PWM power supply for stable, efficient power delivery         Advanced Class D technology for high output with minimal heat       Strapping capability for 24,000W performance         Wired remote with real-time voltage, temperature, and clipping display      Independent crossovers and adjustable phase for precision tuning Precision That Makes the Difference While power is essential, control is what separates the best from the rest. The AA-12K features built-in tuning options that allow you to fine-tune your setup for optimal performance. Whether you're adjusting the crossover points or monitoring voltage levels during a high-demand demo, this amplifier puts you in control. Additionally, the AA-12K's efficient design means you can run harder, longer, and louder — without risking thermal shutdown or signal degradation. A Trusted Solution for High-Stakes Audio For SPL competitors and car audio professionals, the AA-12K offers a solution that balances extreme power with durability and smart design. If you’re tired of amplifiers that can’t keep up or fail when pushed, the AA-12K delivers the reliability and output needed to compete at the highest levels. Explore more about the AA-12K and discover how Ampere Audio’s flagship amplifier can take your sound system to the next level. Whether you’re chasing trophies or just chasing perfection, this amplifier is built to perform — and built to win. Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 12,000W 2 Ohm Mono: 7,000W 4 Ohm Mono: 4,000W 2 Ohm Strapped (Linked): 24,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: > 97% (at 4 Ohms) Input Sensitivity: 6V – 0.2V Frequency Response: 15Hz – 264Hz Signal-to-Noise Ratio: 91 dB Damping Factor: > 400 THD: < 0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24 dB/Oct) Subsonic Filter: 10Hz – 50Hz (24 dB/Oct) Bass Boost: 0 – 9 dB @ 45Hz Phase Shift: 0 – 180° Connectivity & Extras: RCA Inputs/Outputs (for Master/Slave Linking) Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Voltage Speaker Short DC Offset Fuse Rating: 1000A (External – not built-in) Dimensions: 27.55" (L) x 11.82" (W) x 3.06" (H)

Take Command of Clean Power with the Ampere Audio AA-5K Car Amplifier When precision and dependability matter just as much as output, the Ampere Audio AA-5K steps up. Designed for daily drivers and competitors alike, this amplifier delivers the ideal balance of power, clarity, and control. Many mid-power amps promise performance — few deliver it without distortion, overheating, or drop-off under load. The AA-5K brings consistency and confidence to systems that demand serious, everyday performance. Power You Can Push Without Fear Anyone who’s ever run an amp at its limit knows how easily things can go wrong: clipped signals, voltage dips, or thermal shutdowns. The AA-5K eliminates those worries with a design that channels energy efficiently and cleanly. It’s built for real-world setups — where music runs long, bass hits hard, and reliability can’t be optional. With Ampere Audio engineering behind it, the AA-5K is tuned for high efficiency, low heat, and dependable stability even at demanding impedances. Built to Perform, Tuned to Impress Delivering up to 5,000 watts RMS at 1 ohm, the AA-5K is a Class D monoblock amplifier that brings serious power to competitive and daily builds alike. When linked, it produces a commanding 10,000 watts, giving you the flexibility to expand or compete as your system grows. Whether you’re after clean lows, responsive control, or show-level sound, the AA-5K delivers it with finesse. Performance highlights: Dual MOSFET PWM power supply for efficient, stable output Class D topology for strong power delivery with minimal heat Strapping capability for 10,000W combined performance Wired remote with real-time voltage, temperature, and clipping display Fully adjustable crossovers and phase control for perfect system alignment Efficient Power with a Purpose The AA-5K gives you full flexibility over your setup — offering independent crossovers, subsonic filtering, and variable phase adjustment. Fine-tune your system to hit harder, cleaner, and more precisely. Combined with Ampere Audio’s high-efficiency power design, it’s made to play louder for longer without fatigue or failure. Whether you’re daily driving or demoing, the AA-5K’s combination of performance, protection, and precision ensures your system stays consistent no matter the conditions. Engineered for Durability, Designed for Enthusiasts From internal component selection to circuit protection, every part of the AA-5K was designed with long-term reliability in mind. Thermal, voltage, and short protection systems keep your investment safe while ensuring uninterrupted performance. If your goal is dependable, clean, and confident power — the AA-5K delivers every time.   Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 5,000W 2 Ohm Mono: 3,000W 4 Ohm Mono: 2,000W 2 Ohm Strapped (Linked): 10,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: >97% (at 4 Ohms) Input Sensitivity: 6V – 0.2V Frequency Response: 14Hz – 265Hz Signal-to-Noise Ratio: 94 dB Damping Factor: >340 THD: <0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24 dB/Oct) Subsonic Filter: 10Hz – 50Hz (24 dB/Oct) Bass Boost: 0 – 9 dB @ 45Hz Phase Shift: 0 – 180° Connectivity & Extras: RCA Inputs/Outputs (for Master/Slave Linking) Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Voltage Speaker Short DC Offset Fuse Rating: 450A (External – not built-in) Dimensions: 15.74" (L) × 11.82" (W) × 3.06" (H)

Command Unstoppable Output with the Ampere Audio AA-8K Car Amplifier When serious competitors chase numbers and clarity, every watt matters. The Ampere Audio AA-8K is built for those who refuse to settle — the demo kings, the SPL warriors, and anyone who lives for precision and power. Many amplifiers can get loud, but few maintain authority and consistency when pushed to the edge. The AA-8K changes that with a design that blends sheer strength with control and endurance. Why Control Is the Real Power An amplifier that’s all muscle and no discipline can become your system’s weakest link. Overheating, clipping, and distorted output don’t just ruin your sound — they can end your gear. The challenge isn’t finding power; it’s finding power that performs flawlessly when demand peaks. That’s why the AA-8K exists. It’s engineered to deliver massive output that stays clean, efficient, and cool. Built around Ampere Audio’s competition-proven platform, it offers precise tuning options, smart protection, and relentless reliability that seasoned competitors trust. Built for Those Who Push the Limits The AA-8K is a Class D monoblock amplifier capable of producing 8,000 watts RMS at 1 ohm — and when strapped, it unleashes a thunderous 16,000 watts. This amplifier isn’t for the faint of heart. It’s designed for systems that demand big current, extreme control, and consistent power delivery. Whether you’re building for the competition lanes or showing off at demo events, the AA-8K delivers the authority your subs deserve. Core performance highlights include: Dual MOSFET PWM power supply for clean, consistent voltage Efficient Class D topology for maximum output and low heat Strapping capability for 16,000W performance Wired remote with live voltage, temperature, and clipping indicators Independent crossover and phase controls for system tuning precision Efficient Power, Confident Performance Brute strength means nothing without control. The AA-8K gives you full command of your setup — with variable crossovers, subsonic filtering, and phase adjustment built in. Whether you’re dialing in your frequency response or monitoring voltage during a full-tilt demo, this amplifier gives you the tools to stay in control of your sound. Its advanced efficiency also means more playing time and less downtime. Run it hard, stay cool, and let your subs deliver clean power hit after hit. Designed to Dominate, Built to Last From the inside out, the Ampere Audio AA-8K was engineered for endurance. With robust components, intelligent protection circuits, and superior thermal design, it’s built to handle extreme conditions and high-demand systems without compromise. If you demand an amplifier that can take abuse, maintain composure, and perform on command — the AA-8K is your competitive advantage.   Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 8,000W 2 Ohm Mono: 5,000W 4 Ohm Mono: 3,000W 2 Ohm Strapped (Linked): 16,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: >97% (at 4 Ohms) Input Sensitivity: 6V – 0.2V Frequency Response: 15Hz – 264Hz Signal-to-Noise Ratio: 94 dB Damping Factor: >400 THD: <0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24 dB/Oct) Subsonic Filter: 10Hz – 50Hz (24 dB/Oct) Bass Boost: 0 – 9 dB @ 45Hz Phase Shift: 0 – 180° Connectivity & Extras: RCA Inputs/Outputs (for Master/Slave Linking) Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Voltage Speaker Short DC Offset Fuse Rating: 650A (External – not built-in) Dimensions: 19.68" (L) × 11.82" (W) × 3.06" (H)

Unleash Competition-Level Power with the Ampere Audio AA-12K Car Amplifier In the world of car audio competitions, power and control are everything. Whether you're pushing the limits at SPL events or showcasing your system at high-volume demos, you need an amplifier that delivers raw output with precision. Many competitors struggle to find a car amplifier that offers both massive power and consistent performance without overheating or distorting at high volumes. The Ampere Audio AA-12K solves this problem with a design engineered specifically for those who demand domination in every decibel. Why Power Alone Isn’t Enough If you’ve ever pushed an underpowered amplifier to its limits, you’ve likely experienced overheating, signal clipping, or uneven output. These issues not only affect your performance but can also damage your gear over time. For SPL competitors and serious car audio enthusiasts, the challenge isn’t just finding an amplifier — it’s finding one that performs at peak levels without compromise. That’s where the AA-12K from Ampere Audio steps in. Designed with both strength and intelligence, it’s not just about loudness — it’s about clean, controlled, and efficient power delivery. Built for Serious Competitors The AA-12K is a Class D monoblock amplifier built to produce up to 12,000 watts RMS at 1 ohm. When strapped, it delivers an astonishing 24,000 watts, giving competitors an edge in the lanes. Whether you're aiming to flex at demo meets or crush it in SPL competitions, this amplifier delivers the brute force needed to drive your subs — and dominate the soundstage. Key features include: Dual MOSFET PWM power supply for stable, efficient power delivery Advanced Class D technology for high output with minimal heat Strapping capability for 24,000W performance Wired remote with real-time voltage, temperature, and clipping display Independent crossovers and adjustable phase for precision tuning Precision That Makes the Difference While power is essential, control is what separates the best from the rest. The AA-12K features built-in tuning options that allow you to fine-tune your setup for optimal performance. Whether you're adjusting the crossover points or monitoring voltage levels during a high-demand demo, this amplifier puts you in control. Additionally, the AA-12K's efficient design means you can run harder, longer, and louder — without risking thermal shutdown or signal degradation. A Trusted Solution for High-Stakes Audio For SPL competitors and car audio professionals, the AA-12K offers a solution that balances extreme power with durability and smart design. If you’re tired of amplifiers that can’t keep up or fail when pushed, the AA-12K delivers the reliability and output needed to compete at the highest levels. Explore more about the AA-12K and discover how Ampere Audio’s flagship amplifier can take your sound system to the next level. Whether you’re chasing trophies or just chasing perfection, this amplifier is built to perform — and built to win. Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 12,000W 2 Ohm Mono: 7,000W 4 Ohm Mono: 4,000W 2 Ohm Strapped (Linked): 24,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: > 97% (at 4 Ohms) Input Sensitivity: 6V – 0.2V Frequency Response: 15Hz – 264Hz Signal-to-Noise Ratio: 91 dB Damping Factor: > 400 THD: < 0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24 dB/Oct) Subsonic Filter: 10Hz – 50Hz (24 dB/Oct) Bass Boost: 0 – 9 dB @ 45Hz Phase Shift: 0 – 180° Connectivity & Extras: RCA Inputs/Outputs (for Master/Slave Linking) Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Voltage Speaker Short DC Offset Fuse Rating: 1000A (External – not built-in) Dimensions: 27.55" (L) x 11.82" (W) x 3.06" (H)

Take Command of Clean Power with the Ampere Audio AA-5K Car Amplifier When precision and dependability matter just as much as output, the Ampere Audio AA-5K steps up. Designed for daily drivers and competitors alike, this amplifier delivers the ideal balance of power, clarity, and control. Many mid-power amps promise performance — few deliver it without distortion, overheating, or drop-off under load. The AA-5K brings consistency and confidence to systems that demand serious, everyday performance. Power You Can Push Without Fear Anyone who’s ever run an amp at its limit knows how easily things can go wrong: clipped signals, voltage dips, or thermal shutdowns. The AA-5K eliminates those worries with a design that channels energy efficiently and cleanly. It’s built for real-world setups — where music runs long, bass hits hard, and reliability can’t be optional. With Ampere Audio engineering behind it, the AA-5K is tuned for high efficiency, low heat, and dependable stability even at demanding impedances. Built to Perform, Tuned to Impress Delivering up to 5,000 watts RMS at 1 ohm, the AA-5K is a Class D monoblock amplifier that brings serious power to competitive and daily builds alike. When linked, it produces a commanding 10,000 watts, giving you the flexibility to expand or compete as your system grows. Whether you’re after clean lows, responsive control, or show-level sound, the AA-5K delivers it with finesse. Performance highlights: Dual MOSFET PWM power supply for efficient, stable output Class D topology for strong power delivery with minimal heat Strapping capability for 10,000W combined performance Wired remote with real-time voltage, temperature, and clipping display Fully adjustable crossovers and phase control for perfect system alignment Efficient Power with a Purpose The AA-5K gives you full flexibility over your setup — offering independent crossovers, subsonic filtering, and variable phase adjustment. Fine-tune your system to hit harder, cleaner, and more precisely. Combined with Ampere Audio’s high-efficiency power design, it’s made to play louder for longer without fatigue or failure. Whether you’re daily driving or demoing, the AA-5K’s combination of performance, protection, and precision ensures your system stays consistent no matter the conditions. Engineered for Durability, Designed for Enthusiasts From internal component selection to circuit protection, every part of the AA-5K was designed with long-term reliability in mind. Thermal, voltage, and short protection systems keep your investment safe while ensuring uninterrupted performance. If your goal is dependable, clean, and confident power — the AA-5K delivers every time. Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 5,000W 2 Ohm Mono: 3,000W 4 Ohm Mono: 2,000W 2 Ohm Strapped (Linked): 10,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: >97% (at 4 Ohms) Input Sensitivity: 6V – 0.2V Frequency Response: 14Hz – 265Hz Signal-to-Noise Ratio: 94 dB Damping Factor: >340 THD: <0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24 dB/Oct) Subsonic Filter: 10Hz – 50Hz (24 dB/Oct) Bass Boost: 0 – 9 dB @ 45Hz Phase Shift: 0 – 180° Connectivity & Extras: RCA Inputs/Outputs (for Master/Slave Linking) Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Voltage Speaker Short DC Offset Fuse Rating: 450A (External – not built-in) Dimensions: 15.74" (L) × 11.82" (W) × 3.06" (H)

Command Unstoppable Output with the Ampere Audio AA-8K Car Amplifier When serious competitors chase numbers and clarity, every watt matters. The Ampere Audio AA-8K is built for those who refuse to settle — the demo kings, the SPL warriors, and anyone who lives for precision and power. Many amplifiers can get loud, but few maintain authority and consistency when pushed to the edge. The AA-8K changes that with a design that blends sheer strength with control and endurance. Why Control Is the Real Power An amplifier that’s all muscle and no discipline can become your system’s weakest link. Overheating, clipping, and distorted output don’t just ruin your sound — they can end your gear. The challenge isn’t finding power; it’s finding power that performs flawlessly when demand peaks. That’s why the AA-8K exists. It’s engineered to deliver massive output that stays clean, efficient, and cool. Built around Ampere Audio’s competition-proven platform, it offers precise tuning options, smart protection, and relentless reliability that seasoned competitors trust. Built for Those Who Push the Limits The AA-8K is a Class D monoblock amplifier capable of producing 8,000 watts RMS at 1 ohm — and when strapped, it unleashes a thunderous 16,000 watts. This amplifier isn’t for the faint of heart. It’s designed for systems that demand big current, extreme control, and consistent power delivery. Whether you’re building for the competition lanes or showing off at demo events, the AA-8K delivers the authority your subs deserve. Core performance highlights include: Dual MOSFET PWM power supply for clean, consistent voltage Efficient Class D topology for maximum output and low heat Strapping capability for 16,000W performance Wired remote with live voltage, temperature, and clipping indicators Independent crossover and phase controls for system tuning precision Efficient Power, Confident Performance Brute strength means nothing without control. The AA-8K gives you full command of your setup — with variable crossovers, subsonic filtering, and phase adjustment built in. Whether you’re dialing in your frequency response or monitoring voltage during a full-tilt demo, this amplifier gives you the tools to stay in control of your sound. Its advanced efficiency also means more playing time and less downtime. Run it hard, stay cool, and let your subs deliver clean power hit after hit. Designed to Dominate, Built to Last From the inside out, the Ampere Audio AA-8K was engineered for endurance. With robust components, intelligent protection circuits, and superior thermal design, it’s built to handle extreme conditions and high-demand systems without compromise. If you demand an amplifier that can take abuse, maintain composure, and perform on command — the AA-8K is your competitive advantage. Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 8,000W 2 Ohm Mono: 5,000W 4 Ohm Mono: 3,000W 2 Ohm Strapped (Linked): 16,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: >97% (at 4 Ohms) Input Sensitivity: 6V – 0.2V Frequency Response: 15Hz – 264Hz Signal-to-Noise Ratio: 94 dB Damping Factor: >400 THD: <0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24 dB/Oct) Subsonic Filter: 10Hz – 50Hz (24 dB/Oct) Bass Boost: 0 – 9 dB @ 45Hz Phase Shift: 0 – 180° Connectivity & Extras: RCA Inputs/Outputs (for Master/Slave Linking) Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Voltage Speaker Short DC Offset Fuse Rating: 650A (External – not built-in) Dimensions: 19.68" (L) × 11.82" (W) × 3.06" (H)