Ampere Audio Amplifiers

Unleash Competition-Level Power with the Ampere Audio AA-12K Car Amplifier In the world of car audio competitions, power and control are everything. Whether you're pushing the limits at SPL events or showcasing your system at high-volume demos, you need an amplifier that delivers raw output with precision. Many competitors struggle to find a car amplifier that offers both massive power and consistent performance without overheating or distorting at high volumes. The Ampere Audio AA-12K solves this problem with a design engineered specifically for those who demand domination in every decibel. Why Power Alone Isn’t Enough If you’ve ever pushed an underpowered amplifier to its limits, you’ve likely experienced overheating, signal clipping, or uneven output. These issues not only affect your performance but can also damage your gear over time. For SPL competitors and serious car audio enthusiasts, the challenge isn’t just finding an amplifier — it’s finding one that performs at peak levels without compromise. That’s where the AA-12K from Ampere Audio steps in. Designed with both strength and intelligence, it’s not just about loudness — it’s about clean, controlled, and efficient power delivery. Built for Serious Competitors The AA-12K is a Class D monoblock amplifier built to produce up to 12,000 watts RMS at 1 ohm. When strapped, it delivers an astonishing 24,000 watts, giving competitors an edge in the lanes. Whether you're aiming to flex at demo meets or crush it in SPL competitions, this amplifier delivers the brute force needed to drive your subs — and dominate the soundstage. Key features include:         Dual MOSFET PWM power supply for stable, efficient power delivery         Advanced Class D technology for high output with minimal heat       Strapping capability for 24,000W performance         Wired remote with real-time voltage, temperature, and clipping display      Independent crossovers and adjustable phase for precision tuning Precision That Makes the Difference While power is essential, control is what separates the best from the rest. The AA-12K features built-in tuning options that allow you to fine-tune your setup for optimal performance. Whether you're adjusting the crossover points or monitoring voltage levels during a high-demand demo, this amplifier puts you in control. Additionally, the AA-12K's efficient design means you can run harder, longer, and louder — without risking thermal shutdown or signal degradation. A Trusted Solution for High-Stakes Audio For SPL competitors and car audio professionals, the AA-12K offers a solution that balances extreme power with durability and smart design. If you’re tired of amplifiers that can’t keep up or fail when pushed, the AA-12K delivers the reliability and output needed to compete at the highest levels. Explore more about the AA-12K and discover how Ampere Audio’s flagship amplifier can take your sound system to the next level. Whether you’re chasing trophies or just chasing perfection, this amplifier is built to perform — and built to win. Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 12,000W 2 Ohm Mono: 7,000W 4 Ohm Mono: 4,000W 2 Ohm Strapped (Linked): 24,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: > 97% (at 4 Ohms) Input Sensitivity: 6V – 0.2V Frequency Response: 15Hz – 264Hz Signal-to-Noise Ratio: 91 dB Damping Factor: > 400 THD: < 0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24 dB/Oct) Subsonic Filter: 10Hz – 50Hz (24 dB/Oct) Bass Boost: 0 – 9 dB @ 45Hz Phase Shift: 0 – 180° Connectivity & Extras: RCA Inputs/Outputs (for Master/Slave Linking) Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Voltage Speaker Short DC Offset Fuse Rating: 1000A (External – not built-in) Dimensions: 27.55" (L) x 11.82" (W) x 3.06" (H)

Upgrade Your Entire Sound System with the Ampere Audio AA-200.4 4-Channel Amplifier Great sound starts with clean power. Whether you're upgrading factory speakers, building a dedicated full-range system, or looking for a versatile amplifier capable of powering speakers and subwoofers, the amplifier you choose plays a critical role in overall system performance. Many amplifiers struggle to provide the combination of output, flexibility, and reliability needed for modern car audio systems. The Ampere Audio AA-200.4 was engineered to solve that problem by delivering powerful full-range performance in a compact, feature-rich package. Why Speaker Power Matters Factory head units and underpowered amplifiers often leave speakers operating far below their potential. The result is reduced output, limited dynamics, and distortion when volume levels increase. Upgrading your speakers without providing adequate power often leads to disappointing results and wasted performance. The AA-200.4 delivers the clean power needed to unlock the full potential of your audio system. Producing up to 200 watts RMS per channel at 4 ohms and 350 watts RMS per channel at 2 ohms, this amplifier provides the headroom needed for improved clarity, increased output, and greater overall control. Whether you're powering component speakers, pro audio mids and highs, or a combination of speakers and subwoofers, the AA-200.4 delivers the performance needed to bring your music to life. Built for Versatility The AA-200.4 was designed for enthusiasts who want flexibility. Its full-range Class D design allows it to be used in a variety of system configurations, from traditional four-speaker setups to active systems and even bridged applications for subwoofers. Advanced crossover controls with selectable x1 and x10 multipliers provide an extremely wide tuning range, making it easy to integrate with everything from tweeters and midrange speakers to pro audio drivers and subwoofers. A built-in Perfect Band-Pass Filter gives you even more control over your system, allowing precise tuning for maximum performance. Key features include: 200 Watts RMS x 4 @ 4 Ohms 350 Watts RMS x 4 @ 2 Ohms 750 Watts RMS x 2 Bridged @ 4 Ohms Full Range Class D Technology Perfect Band-Pass Filtering Variable High Pass and Low Pass Crossovers x1 / x10 Crossover Multipliers Clipping Indicators High-Efficiency Design 4-Way Protection Circuitry Precision Control for Every Build Every system is different, and the AA-200.4 provides the tuning flexibility needed to maximize performance. Adjustable high-pass and low-pass filters allow you to dial in crossover points with precision, while the crossover multiplier expands adjustment ranges for more advanced system configurations. Whether you're building a loud daily driver, powering a full active front stage, or creating a dedicated mids and highs system, the AA-200.4 gives you the control needed to optimize every speaker in your vehicle. Integrated clipping indicators also help you monitor system performance and avoid distortion when pushing your system hard. Built to Play Loud and Stay Reliable Power means nothing without reliability. That's why the AA-200.4 incorporates a comprehensive 4-Way Protection Circuit that safeguards the amplifier from thermal overload, voltage fluctuations, speaker shorts, and DC offset conditions. Combined with its highly efficient Class D design, the amplifier runs cooler and more efficiently than traditional amplifier designs. From daily commutes to weekend demos, the AA-200.4 is built to deliver clean, dependable performance every time you turn the key. If you're looking for an amplifier that offers serious power, advanced tuning, and flexible installation options, the Ampere Audio AA-200.4 is ready for the job. Technical Specifications: Power Output (RMS @ 14.4V): 200W x 4 @ 4 Ohms 350W x 4 @ 2 Ohms 750W x 2 Bridged @ 4 Ohms General: Full Range Class D Design High-Efficiency Digital Multi-Channel Amplifier 2 Ohm Stereo Stable Efficiency: >95% Input Sensitivity: 6V – 0.2V Frequency Response: 10Hz – 24kHz Signal-to-Noise Ratio: 91dB Damping Factor: >120 THD: <0.1% Operating Voltage: 9.5V – 16V Controls & Filters: High Pass Filter: 20Hz – 500Hz High Pass Multiplier: x1 / x10 Low Pass Filter: 50Hz – 500Hz Low Pass Multiplier: x1 / x10 Perfect Band-Pass Filter Input Mode: CH2 / CH4 Integrated Clipping Indicators Protection Features: Thermal Voltage Speaker Short DC Offset Electrical:  120A  (External – not built-in) Dimensions: 11.81” (L) x 9.83” (W) x 3.00 (H) Application Options: 2-Channel Bridged Systems 3-Channel Systems 4-Channel Full-Range Systems 5-Channel Speaker/Subwoofer Configurations

Unleash Serious Performance with the Ampere Audio AA-3K Car Amplifier  When it comes to building a powerful bass system, having the right amplifier can make all the difference. Many enthusiasts struggle with amplifiers that promise big numbers but fail to deliver consistent performance when it matters most. Whether you're upgrading your daily driver, building a weekend demo vehicle, or simply looking for reliable power for your subwoofers, you need an amplifier that combines output, efficiency, and control. The Ampere Audio AA-3K was designed to do exactly that. Why Reliable Power Matters An amplifier is the foundation of any subwoofer system. When an amplifier runs out of power, overheats, or clips excessively, performance suffers and your equipment is put at risk. Weak amplifiers can leave subwoofers underpowered, while poorly designed amplifiers often struggle to maintain clean output during demanding listening sessions. The AA-3K eliminates those concerns by delivering a true balance of power and reliability. Built around a high-efficiency Class D platform and engineered with a robust Dual MOSFET PWM power supply, it provides the current your subwoofers need while maintaining stable operation under heavy loads. Built for Bass Enthusiasts The AA-3K is designed to produce up to 3,000 watts RMS at 1 ohm and can be strapped with a second amplifier for an incredible 6,000 watts RMS of combined output. Whether you're powering a single high-performance subwoofer or multiple drivers in a larger system, the AA-3K delivers the authority needed to bring your music to life. Key features include: Dual MOSFET PWM power supply for stable, efficient power delivery Advanced Class D technology for high output with minimal heat Strapping capability for 6,000W performance Wired remote with real-time voltage, temperature, and clipping display Independent crossovers and adjustable phase for precision tuning Control That Lets You Fine-Tune Your System  Every vehicle, enclosure, and subwoofer combination is different. That's why the AA-3K includes a complete suite of tuning controls designed to help you get the most from your system. Variable crossover controls allow you to tailor your frequency response, while adjustable phase and bass boost controls help maximize performance based on your installation. The included wired remote gives you real-time access to critical system information, including amplifier voltage, operating temperature, and clipping status. This allows you to monitor performance and make adjustments without leaving the driver's seat. Built to Perform Day After Day The AA-3K was designed for enthusiasts who demand more than just peak numbers. With advanced protection circuitry guarding against thermal overload, voltage fluctuations, speaker shorts, and DC offset, this amplifier is built to withstand the demands of real-world use. Whether you're chasing higher output, upgrading your current setup, or building a system that simply gets loud and stays reliable, the Ampere Audio AA-3K delivers the performance, control, and durability needed to take your bass to the next level. Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 3,000W 2 Ohm Mono: 2,000W 4 Ohm Mono: 1,000W 2 Ohm Strapped (Linked): 6,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: >94% Input Sensitivity: 6V – 0.2V Frequency Response: 14Hz – 266Hz Signal-to-Noise Ratio: 99dB Damping Factor: >400 THD: <0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24dB/Octave) Subsonic Filter: 10Hz – 50Hz (24dB/Octave) Bass Boost: 0 – 9dB @ 45Hz Phase Shift: 0° – 180° Connectivity & Extras: RCA Inputs / Outputs Master / Slave Linking Capability Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Protection Voltage Protection Speaker Short Protection DC Offset Protection Fuse Rating: 300A (External – not built-in) Dimensions: 11.81” (L) x 11.82” (W) x 3.06” (H)

Power Bigger Speakers with Confidence Using the Ampere Audio AA-500.4 4-Channel Amplifier  When your system demands serious power, an ordinary multi-channel amplifier simply won’t cut it. High-performance speakers, pro audio drivers, and competition-inspired builds require clean, consistent power to perform at their best. Many enthusiasts find themselves limited by amplifiers that run out of headroom, introduce distortion at higher volumes, or lack the tuning flexibility needed to maximize system performance. The Ampere Audio AA-500.4 was engineered to overcome those limitations and deliver the output today's demanding audio systems deserve. Why More Power Makes a Difference Speakers perform best when they have adequate power reserves available. An underpowered amplifier can limit output, reduce dynamics, and introduce distortion as volume levels increase. Whether you're powering a set of high-output component speakers, pro audio mids and highs, or a fully active front stage, clean power is the key to achieving maximum performance. The AA-500.4 delivers an impressive 500 watts RMS per channel at 4 ohms, 700 watts RMS per channel at 2 ohms, and up to 1,500 watts RMS bridged. This level of output provides the headroom necessary to reproduce music with authority, clarity, and impact. From daily listening to competition-level demo vehicles, the AA-500.4 provides the power needed to keep your system performing at its highest level. Built for High-Output Systems The AA-500.4 was designed for enthusiasts who demand more from their equipment. Built around a high-efficiency Class D architecture, this amplifier delivers substantial output while maintaining excellent efficiency and manageable operating temperatures. Its flexible design allows it to power everything from full-range speakers and component systems to pro audio setups and bridged subwoofer applications. Advanced crossover controls with selectable x1 and x10 multipliers allow for an exceptionally wide adjustment range, giving installers and enthusiasts the ability to fine-tune virtually any speaker combination. Combined with Ampere Audio's Perfect Band-Pass Filter, the AA-500.4 offers tuning flexibility rarely found in amplifiers within its class. Key features include: 500 Watts RMS x 4 @ 4 Ohms 700 Watts RMS x 4 @ 2 Ohms 1,500 Watts RMS x 2 Bridged @ 4 Ohms Full Range Class D Technology Perfect Band-Pass Filtering Variable High Pass and Low Pass Crossovers x1 / x10 Crossover Multipliers Integrated Clipping Indicators High-Efficiency Digital Design 4-Way Protection Circuitry Advanced Tuning for Maximum Performance Every system has unique requirements, which is why the AA-500.4 provides extensive tuning capabilities. Adjustable high-pass and low-pass crossovers allow you to precisely control frequency ranges, while the crossover multipliers dramatically expand adjustment possibilities for advanced applications. Whether you're building a dedicated mids and highs system, an active front stage, or a powerful full-range setup, the AA-500.4 gives you the tools needed to achieve optimal performance. Integrated clipping indicators help you monitor amplifier operation and maximize output while minimizing distortion, ensuring your speakers receive clean, controlled power. Designed to Handle the Demands of Real-World Use High output requires durability. The AA-500.4 incorporates Ampere Audio's comprehensive 4-Way Protection Circuit to help safeguard the amplifier from thermal overload, voltage irregularities, speaker shorts, and DC offset conditions. Combined with its efficient Class D design, the amplifier is built to perform consistently under demanding conditions. Whether you're pushing pro audio drivers to extreme output levels or building a powerful daily driver, the AA-500.4 delivers the reliability, flexibility, and performance needed to take your system to the next level. For enthusiasts who refuse to compromise, the Ampere Audio AA-500.4 provides the power to make every watt count. Technical Specifications: Power Output (RMS @ 14.4V): 500W x 4 @ 4 Ohms 700W x 4 @ 2 Ohms 1,500W x 2 Bridged @ 4 Ohms General: Full Range Class D Design High-Efficiency Digital Multi-Channel Amplifier 2 Ohm Stereo Stable Efficiency: >88% Input Sensitivity: 6V – 0.2V Frequency Response: 10Hz – 24.2kHz Signal-to-Noise Ratio: 93dB Damping Factor: >120 THD: <0.1% Operating Voltage: 9.5V – 16V Controls & Filters: High Pass Filter: 20Hz – 500Hz High Pass Multiplier: x1 / x10 Low Pass Filter: 50Hz – 500Hz Low Pass Multiplier: x1 / x10 Perfect Band-Pass Filter Input Mode: CH2 / CH4 Integrated Clipping Indicators Protection Features: Thermal Voltage Speaker Short DC Offset Electrical: 270A  (External – not built-in) Dimensions: 14.96” (L) x 9.83” (W) x 3.00 (H) Application Options: 2-Channel Bridged Systems 3-Channel Systems 4-Channel Full-Range Systems High-Output Pro Audio Systems Active Speaker Systems Speaker and Subwoofer Combinations

Take Command of Clean Power with the Ampere Audio AA-5K Car Amplifier When precision and dependability matter just as much as output, the Ampere Audio AA-5K steps up. Designed for daily drivers and competitors alike, this amplifier delivers the ideal balance of power, clarity, and control. Many mid-power amps promise performance — few deliver it without distortion, overheating, or drop-off under load. The AA-5K brings consistency and confidence to systems that demand serious, everyday performance. Power You Can Push Without Fear Anyone who’s ever run an amp at its limit knows how easily things can go wrong: clipped signals, voltage dips, or thermal shutdowns. The AA-5K eliminates those worries with a design that channels energy efficiently and cleanly. It’s built for real-world setups — where music runs long, bass hits hard, and reliability can’t be optional. With Ampere Audio engineering behind it, the AA-5K is tuned for high efficiency, low heat, and dependable stability even at demanding impedances. Built to Perform, Tuned to Impress Delivering up to 5,000 watts RMS at 1 ohm, the AA-5K is a Class D monoblock amplifier that brings serious power to competitive and daily builds alike. When linked, it produces a commanding 10,000 watts, giving you the flexibility to expand or compete as your system grows. Whether you’re after clean lows, responsive control, or show-level sound, the AA-5K delivers it with finesse. Performance highlights: Dual MOSFET PWM power supply for efficient, stable output Class D topology for strong power delivery with minimal heat Strapping capability for 10,000W combined performance Wired remote with real-time voltage, temperature, and clipping display Fully adjustable crossovers and phase control for perfect system alignment Efficient Power with a Purpose The AA-5K gives you full flexibility over your setup — offering independent crossovers, subsonic filtering, and variable phase adjustment. Fine-tune your system to hit harder, cleaner, and more precisely. Combined with Ampere Audio’s high-efficiency power design, it’s made to play louder for longer without fatigue or failure. Whether you’re daily driving or demoing, the AA-5K’s combination of performance, protection, and precision ensures your system stays consistent no matter the conditions. Engineered for Durability, Designed for Enthusiasts From internal component selection to circuit protection, every part of the AA-5K was designed with long-term reliability in mind. Thermal, voltage, and short protection systems keep your investment safe while ensuring uninterrupted performance. If your goal is dependable, clean, and confident power — the AA-5K delivers every time.   Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 5,000W 2 Ohm Mono: 3,000W 4 Ohm Mono: 2,000W 2 Ohm Strapped (Linked): 10,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: >97% (at 4 Ohms) Input Sensitivity: 6V – 0.2V Frequency Response: 14Hz – 265Hz Signal-to-Noise Ratio: 94 dB Damping Factor: >340 THD: <0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24 dB/Oct) Subsonic Filter: 10Hz – 50Hz (24 dB/Oct) Bass Boost: 0 – 9 dB @ 45Hz Phase Shift: 0 – 180° Connectivity & Extras: RCA Inputs/Outputs (for Master/Slave Linking) Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Voltage Speaker Short DC Offset Fuse Rating: 450A (External – not built-in) Dimensions: 15.74" (L) × 11.82" (W) × 3.06" (H)

Command Unstoppable Output with the Ampere Audio AA-8K Car Amplifier When serious competitors chase numbers and clarity, every watt matters. The Ampere Audio AA-8K is built for those who refuse to settle — the demo kings, the SPL warriors, and anyone who lives for precision and power. Many amplifiers can get loud, but few maintain authority and consistency when pushed to the edge. The AA-8K changes that with a design that blends sheer strength with control and endurance. Why Control Is the Real Power An amplifier that’s all muscle and no discipline can become your system’s weakest link. Overheating, clipping, and distorted output don’t just ruin your sound — they can end your gear. The challenge isn’t finding power; it’s finding power that performs flawlessly when demand peaks. That’s why the AA-8K exists. It’s engineered to deliver massive output that stays clean, efficient, and cool. Built around Ampere Audio’s competition-proven platform, it offers precise tuning options, smart protection, and relentless reliability that seasoned competitors trust. Built for Those Who Push the Limits The AA-8K is a Class D monoblock amplifier capable of producing 8,000 watts RMS at 1 ohm — and when strapped, it unleashes a thunderous 16,000 watts. This amplifier isn’t for the faint of heart. It’s designed for systems that demand big current, extreme control, and consistent power delivery. Whether you’re building for the competition lanes or showing off at demo events, the AA-8K delivers the authority your subs deserve. Core performance highlights include: Dual MOSFET PWM power supply for clean, consistent voltage Efficient Class D topology for maximum output and low heat Strapping capability for 16,000W performance Wired remote with live voltage, temperature, and clipping indicators Independent crossover and phase controls for system tuning precision Efficient Power, Confident Performance Brute strength means nothing without control. The AA-8K gives you full command of your setup — with variable crossovers, subsonic filtering, and phase adjustment built in. Whether you’re dialing in your frequency response or monitoring voltage during a full-tilt demo, this amplifier gives you the tools to stay in control of your sound. Its advanced efficiency also means more playing time and less downtime. Run it hard, stay cool, and let your subs deliver clean power hit after hit. Designed to Dominate, Built to Last From the inside out, the Ampere Audio AA-8K was engineered for endurance. With robust components, intelligent protection circuits, and superior thermal design, it’s built to handle extreme conditions and high-demand systems without compromise. If you demand an amplifier that can take abuse, maintain composure, and perform on command — the AA-8K is your competitive advantage.   Technical Specifications: Power Output (RMS @ 14.4V): 1 Ohm Mono: 8,000W 2 Ohm Mono: 5,000W 4 Ohm Mono: 3,000W 2 Ohm Strapped (Linked): 16,000W General: Class D Digital Monoblock Design Dual MOSFET PWM Power Supply Efficiency: >97% (at 4 Ohms) Input Sensitivity: 6V – 0.2V Frequency Response: 15Hz – 264Hz Signal-to-Noise Ratio: 94 dB Damping Factor: >400 THD: <0.1% Working Voltage: 9V – 16.5V Controls & Filters: Low Pass Filter: 35Hz – 250Hz (24 dB/Oct) Subsonic Filter: 10Hz – 50Hz (24 dB/Oct) Bass Boost: 0 – 9 dB @ 45Hz Phase Shift: 0 – 180° Connectivity & Extras: RCA Inputs/Outputs (for Master/Slave Linking) Wired Remote Control with: Voltage Display Temperature Display Clipping Indicator Protection Features: Thermal Voltage Speaker Short DC Offset Fuse Rating: 650A (External – not built-in) Dimensions: 19.68" (L) × 11.82" (W) × 3.06" (H)