DS18 Wiring

1/0-GA to 1/4-GA Amp Input Reducers with Offset Stub and Silicone Cover Your 4-GA wire can only do so much: but, DS18’s PI0/4 is the solution you’ve been waiting for! Crafted from highly conductive nickel plated alloy, these reducers transform a 4-GA power and ground input into a powerful 0-GA connection. The rubber surround and offset stub design not only isolates the reducers but also allows for easy removal guaranteeing compatibility with a wide range of builds. Sold in pairs (Both Positive and Negative Inputs), these reducers are guaranteed to optimize your car audio system’s installation and performance effortlessly. Simplify your wiring setup with DS18’s PI0/4!

DS18 RCA‑20FT.10PK20’ Ultra Flex 100% OFC RCA Cable Wire – 10-Pack DS18’s RCA‑20FT offers extra reach for full-length custom builds, large vehicles, or remote amp mounting. Made with 100% OFCOxygen-free copper wiring ensures strong, uninterrupted signal flow — even at full volume over long runs. Ultra Flex for Clean, Tidy InstallsEach cable is wrapped in DS18’s Ultra Flex jacket, making it easy to route under carpet, through firewalls, or around interior panels. Built to Grip and Stay LockedThe dual male RCA connectors are copper-clad aluminum, delivering lightweight durability and a snug fit. Wire up long-haul builds the LOUD way with DS18!  

DS18 PW-OFC4GA-50 Ultra Flex 100% OFC Ground, Power Cable, 50 Feet The high-performance application of DS18’s OFC Power Wire is back in four brand new unique colors (Camo-Green, Neon Green, Yellow, Silver, Red, Black and Blue) for professional show quality customization in any build. DS18’s Oxygen-Free Copper Power Wires run cooler than other conductors, are more resistant to shorts, and are far less likely to corrode due to their reduced oxygen content. This yellow-colored jacket covered 4 gauge wire is best ran in the 500 – 1000 W RMS Range. These are the wires every serious audio enthusiast uses! Highlights Ultra Flexible 50 Ft. Length High Performance Application OFC (Oxygen Free Copper) power or ground wire

DS18 PW-OFC4GA-50CMGR 4-GA Ultra Flex 100% OFC Ground, Power Cable, 50 Feet, Camo Green The high-performance application of DS18’s OFC Power Wire is back in four brand new unique colors (Camo-Green, Neon Green, Yellow, and Silver) for professional show quality customization in any build. DS18’s Oxygen-Free Copper Power Wires run cooler than other conductors, are more resistant to shorts, and are far less likely to corrode due to their reduced oxygen content. This camo-green-colored jacket covered 4-gauge wire is best ran in the 500 – 1000 W RMS Range. These are the wires every serious audio enthusiast uses! Highlights Ultra Flexible 50 Ft. Length High Performance Application OFC (Oxygen Free Copper) power or ground wire

DS18 PW-OFC4GA-50SLV 4-GA Ultra Flex 100% OFC Ground, Power Cable, 50 Feet, Silver The high-performance application of DS18’s OFC Power Wire is back in four brand new unique colors (Camo-Green, Neon Green, Yellow, and Silver) for professional show quality customization in any build. DS18’s Oxygen-Free Copper Power Wires run cooler than other conductors, are more resistant to shorts, and are far less likely to corrode due to their reduced oxygen content. This silver-colored jacket covered 4 gauge wire is best ran in the 500 – 1000 W RMS Range. These are the wires every serious audio enthusiast uses! Highlights Ultra Flexible 50 Ft. Length High Performance Application OFC (Oxygen Free Copper) power or ground wire    

DS18 ANLFH200A Square ANL Fuse Holder With 200 Amp Fuse DS18 carries every tool necessary to keep your builds safe and sturdy. The ANLFH200A helps integrate fuses securely into any electrical circuit. This fuse holder ensures rigid current paths and allows easier replacement for overused fuses.Highlights  Clear protective cover Easy installation for multi use combinations 200 Amp ANL Fuse Included

The best way to prevent any damage to your car audio equipment, add bass and monitor the car amplifier voltage is with the DS18 BKVR remote level control with volt meter. HighlightsUniversal bass knob using RCA in/out to finely adjust your bass level easily with a simple twist. Power indicator and built in voltmeter will keep you informed on your voltage drops during hard hitting bass notes.Technical Details Features:RCA line level control with volt-meter and remote amp trigger can adjust the amplifier gain & turn on/off the amp In-dash or under-dash mountable Rotary push turn ON/OFF knob for amplifier remote Digital volt-meter (10V - 15.9V) Blue LED display (high voltage/low voltage) Compatible with most head units & amplifiers combinationsDimensions:82 x 75 x 27 mm

DS18 audio product designed for high-output car audio and marine applications. Quality construction with competition-grade components. Engineered for powerful performance with reliable operation in demanding conditions.

DS18 audio product designed for high-output car audio and marine applications. Quality construction with competition-grade components. Engineered for powerful performance with reliable operation in demanding conditions.

DS18 JL-HARNESS Plug and Play Harness for JL/JLU/JT for Sound Bar and Amplifier  The JL-HARNESS is an essential piece of equipment for any JT/JL/JLU Jeep audio system with fully loaded sound bar. This Plug and Play Harness connects the 8-inch midrange speakers directly to the DS18 aftermarket amplifier, while the plug-and-play harness utilizes your factory amplifier to push the Tweeters. This harness is designed to get the proper power and cable routing without the need for cutting, splicing or adding of additional wires to your factory harness to power your high-range speakers. RGB cable is also included on the harness so you can wire in the RGB circuit to your sound bar easily with the addition of our LED BTC controller sold separately. Our bonded design effortlessly sets the foundation for the completion of the perfect audio system in your JT/JL/JLU Jeep and frees you of the hassles of cutting during installation. DISCLAIMER: The Plug and Play capabilities of this harness are only available to Jeeps with BASIC Sound Systems. If trying to connect to anything other than the Jeep factory BASIC sound system, the plug and play connectors must be cut and spliced at the harness connection or bypassed to the DS18 Amplifier. Highlights Plug and play design that allows for hassle free installation without manual cutting or splicing. Color coded for easy installation and the supplied brackets will secure the unit firmly to the chassis. Great For Jeep Audio JL/JT/JLU DS18 Sound bar Technical Details                 JL-HARNESS Product Manual

Sound Bar & Amplifier Wiring Harness Kit For 2024 JL Jeeps Install easy with DS18’s JL24-SBAHKIT, an upgrade kit designed for boosting your Jeep JL’s audio system. This soundbar wiring kit Tailored specifically for Jeep JL 2024 models and beyond, this amplifier wiring harness for Jeep JL allows you to connect an amplifier to your JL24-SBAR and dashboard speakers. With the JL24-SBAHKIT you also receive the VX4HL module, a plug-and-play audio signal module that converts factory radio signals into amplifier outputs. With pre-wired connectivity, you can easily install LEDs on your soundbar speakers, rings, grills, and even the DS18 badge. Equipped with high-quality OFC wiring and a robust 150A ANL fuse holder, every component in this kit makes upgrading your Jeep simple and clean. Installation is straightforward—disconnect the battery’s ground post for safety, connect the DS18 T-Harness at the radio side, use the VX4HL module on the amplifier side, and finalize with synchronized LED setup. Spend less time installing and more time getting LOUD with the JL-24SBAHKIT!

DS18 RCA-17FT RCA Ultra Flex 17 Feet  Unleash the true potential of your audio system with DS18’s RCA-17FT Ultra Flex RCA Cable Wire: this two-channel RCA audio cable ensures seamless connection between your car stereo or audio receiver, delivering nothing short of professional-grade audio quality. The cable's braided construction jacket not only enhances durability but also minimizes signal interference. The dual male connectors provide seamless compatibility with any standard stereo left/right output. This means you can easily connect the cable to a wide range of audio devices; whether it's your car stereo, home audio receiver, or any other audio equipment with RCA outputs. The snug fit and precise construction of these connectors guarantee a stable link between your audio components, eliminating any potential signal loss or interference.We understand that every audio setup is unique, and that's why we offer a range of options to cater to your specific needs. DS18’s Ultra Flex RCA Cable is provided in a range of lengths to suit your audio setup: whether you need a compact 1-foot cable, versatile 3-foot and 6-foot options, or longer lengths like 12, or 16 feet, DS18 has you covered. Each cable maintains the same high-quality audio performance and durability, allowing you to customize your audio system with ease.

DS18 RCA-1M2F.10PKUltra Flex 100% OFC RCA Y Connector – 1 Male / 2 Female (10-Pack) DS18’s RCA-1M2F.10PK lets you send a single audio source to two outputs without losing clarity. Crystal-Clear Sound. No Interference.Constructed with 100% oxygen-free copper wiring, each connector ensures flawless signal transfer from source to amp. You get low resistance, zero noise, and premium audio performance throughout your setup. Built for Tight InstallsThe Ultra Flex outer jacket allows each cable to move and bend without cracking. Perfect for fitting into tight spots or complex routing paths, especially in competitive or pro-level builds. Durable ConnectorsEach end is fitted with copper-clad aluminum connectors for a solid hold and reliable performance in high-vibration environments. Get wired with DS18’s RCA-1M2F.10PK!

Designed for car audio enthusiasts like you, DS18’s R1F2M is engineered to elevate the quality of audio reproduced by your system to new heights.Harnessing the raw power of a 1-gauge high quality Y connector, DS18’s R1F2M ensures seamless transmission of audio signal, making every beat and note flow effortlessly from the source directly to your speakers.What sets DS18's R1F2M apart from the rest is its Ultra Flex construction. Crafted with meticulous precision, this Y connector is built to withstand the rigors of the road, providing you with unparalleled durability and reliability. The high-performance male connectors are constructed with copper-clad aluminum, striking the perfect balance between conductivity and lightweight design. The inclusion of OFC wires ensures optimum signal transmission, minimizing resistance and maximizing conductivity. Unlike standard copper wires, OFC wires are virtually free of impurities, allowing for cleaner, more accurate audio reproduction. With the R1F2M's OFC wires and braided construction jacket, DS18 has redefined the boundaries of audio quality.DS18’s R1F2M’s sleek design seamlessly integrates into your car audio setup, ensuring a clean and uncluttered aesthetic while delivering exceptional performance. With its impeccable construction, this Y connector allows for easy installation and flexibility, enabling you to unleash the true potential of your audio system effortlessly.Each component is carefully chosen and tested to meet DS18's rigorous standards, guaranteeing an unparalleled audio experience that surpasses all expectations.

DS18 R2M12MLevel 2 2-to-12 RCA Male Splitter Cable The R2M12M makes connecting easier than ever. This splitter cable has two RCA male cables to collect the signal from one source and twelve RCA male outputs, letting you hook up multiple amplifiers, speakers, or subwoofers at the same time. It’s made with high-quality OFC (oxygen-free copper) wire for clear and reliable sound. The cable’s strong design includes durable insulation available in sleek silver or red-and-black finishes, making it easy to spot and install. Say goodbye to extra connectors or tools – this splitter is all you need for secure and dependable audio connections. Perfect for advanced sound setups, the R2M12M is built to last and delivers top-notch performance. Upgrade with DS18’s R2M12M today and experience the DS18 difference for yourself.

DS18 R1M2F.10PK Ultra Flex 100% OFC RCA – 1 Male / 2 Female (10-Pack) DS18’s R1M2F gives you a clean, reliable split from one output to two inputs. Perfect for sending signal from a single RCA source into multiple amps, processors, or audio zones without worrying about signal degradation. OFC WiringEach connector is built with 100% oxygen-free copper to ensure pure signal transfer. You get full-range sound with zero distortion, or interference in any systems. Built to LastThe Ultra Flex jacket allows these Y cables to route cleanly in tight installs, while the braided jacket adds an extra layer of durability. Locked-InThe copper-clad aluminum RCA ends strike the right balance between weight and strength. They lock in firmly and stay in place, even when bass hits high levels. Expand your system with DS18’s R1M2F!  

DS18 MP3AUX6FT AUX to AUX Cable 6 FT The DS18 Accessories are the top of the line, of all lines. You wouldn't believe the quality these cables deliver. If you are an experienced electronics buyer, a competitor, installer, enthusiast, or simply if you have what it takes to take it to the top level these are the cables that you will go to. AUX MP3 to AUX MP3 Cable 3.5"6-Feet Ultra Flex Noise Rejection Connects Your PC, Tablets, Smartphones, and MP3 players to a car stereo or portable speaker system

The high-performance application of DS18’s OFC Power Wire is back in four brand new unique colors (Camo-Green, Neon Green, Yellow, and Silver) for professional show quality customization in any build. DS18’s Oxygen-Free Copper Power Wires run cooler than other conductors, are more resistant to shorts, and are far less likely to corrode due to their reduced oxygen content. This silver-colored jacket covered 4 gauge wire is best ran in the 500 – 1000 W RMS Range. These are the wires every serious audio enthusiast uses! Highlights Ultra Flexible 50 Ft. Length High Performance Application OFC (Oxygen Free Copper) power or ground wire

DS18 MDSA10/4.50FT Medusa/Snake Audio Wire with 10 Channels RCA and 4 x 12Ga OFC Power Cables - 50ft Let DS18’s MDSA10/4.50FT revolutionize your car audio system with its impressive specifications. With 10 channels of RCA audio and 4 x 12Ga OFC power cables, this multicore audio wire dares you to create a sound system that defies boundaries. This Medusa Wire offers the best means of connecting your equalizers, crossovers, and other audio components to your radio box without sacrificing mobility or compromising on audio quality. The 50ft length of the MDSA10/4.50FT provides an extensive range, allowing you to position your equalizers and crossovers wherever you desire within your vehicle. With this harness, you can have your wires neatly routed inside, OR outside in true PRO-AUDIO fashion.  The 10 channels of RCA audio ensure pristine signal transmission, preserving the integrity of your audio signals from the source to your equalizers and crossovers. Every nuance and detail of your music is faithfully reproduced, delivering a listening experience that captures the essence of the original recording. The DS18 MDSA10/4.50FT sets a new standard for audio purity with its premium craftsmanship and cutting-edge technology. The Tiffany-style RCA plugs will give your system a higher level of sophistication while providing a secure and reliable connection. The 100% oxygen-free copper conductors ensure optimal signal transfer and minimize signal degradation. The twisted shield, encased in PVC black, offers unrivaled protection against electromagnetic interference, guaranteeing perfect reproduction. DS18’s MDSA10/4.50FT Medusa Wire is designed to simplify installation, making it a breeze for both seasoned technicians and beginning enthusiasts alike. By offering an ample 50ft cable length, the MDSA10 allows for greater flexibility in routing and managing of wires. The Tiffany-style RCA’s are user-friendly and ensure hassle-free installation. Each channel is also clearly labele

DS18 R1M2F.L Ultra Flex 100% OFC RCA L Connector 1 Male/2 Female DS18’s R1M2F.L is the ideal choice for car audio builders looking for superior signal transmission in tight, challenging installations. Constructed with 100% OFC (Oxygen-Free Copper) wiring, this Y connector ensures maximum conductivity while minimizing signal loss for pristine audio quality across your entire system. Designed for Maximum Performance and Convenience Every aspect of the R1M2F.L is optimized for high performance. The right-angle L-connector design saves space behind all components, reducing cable stress and helping extend your RCA’s longevity. Its Ultra Flex braided jacket offers flexibility, facilitating precise cable routing even in confined spaces. The male-to-dual-female configuration features copper-clad aluminum connectors for lightweight strength without compromising optimal signal flow.  Essential Specifications The R1M2FL includes a 1-male to 2-female RCA configuration with a 100% OFC internal wiring core, a robust braided jacket for superior flexibility, and high-conductivity copper-clad aluminum connectors. Stop settling for weak connections. Grab DS18’s R1M2F today and crank your audio to the max!  

4-GA Amplification Kit for 2-Door UTV The UTV-KIT4-2DR is a plug & play 4-gauge amplification kit designed to make installing your DS18 NXL-X amplifier in your 2-door UTV easy! Pre-loomed 4-GA OFC wiring Plug & play terminals Waterproof MFH4 fuse holder Optimized for DS18 NXL-X amps Designed specifically for 2-door UTV setups