Prodigy Audio Subwoofers

The NB2 Series of subs are class leading entry level subwoofers, with many features normally found only in higher end products. Starting with a double stacked magnet structure paired with a very long voice coil, the NB2 has an advantage. Reaching up to14mm of linear Xmax One Way and 2” of mechanical movement clearance peak to peak, it assures a durable subwoofer. Cooling is optimized through computer simulations at first and then offering center pole Vent as well as Radial back plate holes for moving BTU’s out of the coil gap. To increase the power handling, we chose to use 500f degree coil adhesive and glue joints throughout the subwoofer. We chose a durable foam surround with a strong paper cone to move the sound pressures reliably. A rubber gasket, chrome push terminals, quality Cotton blend spider with stitched tinsel leads all round out the quality choices toward offering one of the very best entry level subwoofers on the market. Features: RMS Power 400 Watts 8”, 10” and 12” Sizes Xmax of up to 14mm one way at 70% BL High temperature 4 Layer copper voice coil Black aluminum 2” voice coil former Dual 4 ohm coil Rear radial coil gap cooling holes Center pole vent optimized for moving BTU’s Strong stamped steel frame with logo Quality chrome push terminals Flat stitched tinsel leads Specifications: NB2-10d4 RE 6.1 FS 34.295 VAS 21.054 Qes 0.611 Qms 3.24 Qts 0.514 BL 20.11 Mms (g) 165.223 Cms 139.032 Sens 84.2 Xmax 14 Cut Outs & Sizes Model NB2-10d4 Depth 5.625" Cutout 9.250" Overall Dia. 10.375" Displacement 0.11 ft3 Enclosure Design

The NB3 Series of woofers offer a slim line depth for working well under and behind truck seats as well as other tight spaces. The 10” version, for example, is only 3.00” deep. These are designed to optimally perform in extremely small enclosures and in most truck prefab enclosures. Housed inside of a rugged metal basket, you will find an oversized 70 ounce ferrite magnet that uses a 2.5” voice coil with the ability to withstand temperatures up to 500f and has a FEA designed center pole vent for removing the btu’s from the motor and voice coil gap. The spiders are made of a high-quality Cotton and Nomex blend with stitched in flat tinsel leads. This woofer is a work horse and really shines in small, sealed and ported enclosures. Features: RMS Power 500 Watts 10” and 12” Sizes Xmax of 11mm one way at 70% BL High temperature 4 layer copper voice coil Black aluminum 2.5” voice coil former Dual 4 ohm coil Treated paper cone with rubber surround Center pole vent optimized for moving BTU’s Strong steel frame with logos Quality chrome push terminals Flat stitched tinsel leads Specifications: NB3-10d4 RE 6.5 FS 36.406 VAS 14.43 Qes 0.495 Qms 2.282 Qts 0.407 BL 23.365 Mms (g) 151.63 Cms 74.178 Sens 86.9 Xmax 11   Cut Outs & Sizes Model NB3-10d4 Depth 3.000" Cutout 9.125" Overall Dia. 10.250" Displacement 0.10 ft3 Enclosure Design

The NB5 series (10", 12", & 15”) is a robust line up of 1000--1500 watt handling subwoofers. Starting with the motor design, we spent a lot of time optimizing the design to incorporate a large inner pole, upper and lower, Faraday shorting ring which helps to reduce any distortion caused by inductance throughout the movement range of the cone. We chose a 2.75” diameter coil that has a very long winding width, with the wire being made of flat aluminum. Overall, they have 27mm of excursion one way at 70% BL and have a 40mm of X-mech forward and 50mm downward x-mech clearance before soft parts crash into hard parts. The motor utilizes 280 ounces of ferrite rings with a vented pole design with coil gap radial vents for moving heat quickly out of the gap. Mated to the motor is a heavy duty cast aluminum frame that serves as an excellent heat exchanger. As the motor gets hotter the mass of aluminum helps to dissipate the overall heat. Nomex spiders with heavy stitched in tinsel leads connect with the competition grade treated paper cone, and the heavy-duty foam surround that complete the make-up of this woofer. Features: 27mm of x-max one way at 70% BL Product RMS Power 1000 watts Available Coil Options: D2/D4 Vented magnetic gap Black Aluminum 2.75” voice coil for superior power handling High Temperature flat aluminum voice coil wire Large Aluminum ID Faraday Ring Chrome 4awg Push Terminals Stitched on Double Tinsel Leads Heavy Cast aluminum frame Extreme duty Nomex spiders Specifications: NB5-10d2 NB5-10d4 RE 3.8 6.82 FS 37.4 36.988 VAS 5.663 5.995 Qes 0.557 0.646 Qms 4.318 4.496 Qts 0.493 0.537 BL 25.53 28.44 Mms (g) 300.25 284.921 Cms 33.11 35.663 Sens 83.9 82.7 Xmax 29 29 Cut Outs & Sizes Model NB5-10 Depth 7.625" Cutout 9.375" Overall Dia. 10.625" Displacement 0.19 ft3 Enclosure Design

The NB2 Series of subs are class leading entry level subwoofers, with many features normally found only in higher end products. Starting with a double stacked magnet structure paired with a very long voice coil, the NB2 has an advantage. Reaching up to14mm of linear Xmax One Way and 2” of mechanical movement clearance peak to peak, it assures a durable subwoofer. Cooling is optimized through computer simulations at first and then offering center pole Vent as well as Radial back plate holes for moving BTU’s out of the coil gap. To increase the power handling, we chose to use 500f degree coil adhesive and glue joints throughout the subwoofer. We chose a durable foam surround with a strong paper cone to move the sound pressures reliably. A rubber gasket, chrome push terminals, quality Cotton blend spider with stitched tinsel leads all round out the quality choices toward offering one of the very best entry level subwoofers on the market. Features: RMS Power 400 Watts 8”, 10” and 12” Sizes Xmax of up to 14mm one way at 70% BL High temperature 4 Layer copper voice coil Black aluminum 2” voice coil former Dual 4 ohm coil Rear radial coil gap cooling holes Center pole vent optimized for moving BTU’s Strong stamped steel frame with logo Quality chrome push terminals Flat stitched tinsel leads Specifications: NB2-12d4 RE 6.2 FS 28.37 VAS 55.392 Qes 0.522 Qms 3.662 Qts 0.457 BL 21.268 Mms (g) 216.268 Cms 142.835 Sens 85.4 Xmax 14 Cut Outs & Sizes Model NB2-12d4 Depth 6.750" Cutout 11.200" Overall Dia. 12.500" Displacement 0.13 ft3 Enclosure Design

  The NB3 Series of woofers offer a slim line depth for working well under and behind truck seats as well as other tight spaces. The 12” version, for example, is only 3.375” deep. These are designed to optimally perform in extremely small enclosures and in most truck prefab enclosures. Housed inside of a rugged metal basket, you will find an oversized 80 Ounce ferrite magnet that uses a 3.0" voice coil with the ability to withstand temperatures up to 500f and has a FEA designed center pole vent for removing the heat btu’s from the motor and voice coil gap. The spiders are made of a high-quality Cotton and Nomex blend with stitched in flat tinsel leads. This woofer is a work horse and really shines in small, sealed or ported enclosures.   Features: RMS Power 800 Watts 10” and 12” Sizes Xmax of 11mm one way at 70% BL High temperature 4 layer copper voice coil Black aluminum 3.0” voice coil former Dual 4 ohm coil Treated paper cone with rubber surround Center pole vent optimized for moving BTU’s Strong steel frame with logos Quality chrome push terminals Flat stitched tinsel leads Specifications: NB3-12d4 RE 6.7 FS 36.200 VAS 29.665 Qes 0.618 Qms 2.266 Qts 0.485 BL 23.96 Mms (g) 189.22 Cms 73.668 Sens 88.9 Xmax 11   Cut Outs & Sizes Model NB3-12d4 Depth 3.375" Cutout 10.625" Overall Dia. 12.250" Displacement 0.13 ft3 Enclosure Design

The NB5 series (10", 12", & 15”) is a robust line up of 1000--1500 watt handling subwoofers. Starting with the motor design, we spent a lot of time optimizing the design to incorporate a large inner pole, upper and lower, Faraday shorting ring which helps to reduce any distortion caused by inductance throughout the movement range of the cone. We chose a 2.75” diameter coil that has a very long winding width, with the wire being made of flat aluminum. Overall, they have 27mm of excursion one way at 70% BL and have a 40mm of X-mech forward and 50mm downward x-mech clearance before soft parts crash into hard parts. The motor has 280 ounces of ferrite rings and utilizes a vented pole design with coil gap radial vents for moving heat quickly out of the gap. Mated to the motor is a heavy duty cast aluminum frame that serves as an excellent heat exchanger. As the motor gets hotter the mass of aluminum helps to dissipate the overall heat. Nomex spiders with heavy stitched in tinsel leads connect with the competition grade treated paper cone, and the heavy-duty foam surround that complete the make-up of this woofer. Features: 27mm of x-max one way at 70% BL Product RMS Power 1200 watts Available Coil Options: D2/D4 Vented magnetic gap Black Aluminum 2.75” voice coil for superior power handling High Temperature flat aluminum voice coil wire Large Aluminum ID Faraday Ring Chrome 4awg Push Terminals Stitched on Double Tinsel Leads Heavy Cast aluminum frame Extreme duty Nomex spiders Specifications: NB5-12d2 NB5-12d4 RE 3.84 6.175 FS 35.8 35.92 VAS 14.022 14.331 Qes 0.476 0.597 Qms 4.654 4.99 Qts 0.432 0.533 BL 28.269 30.156 Mms (g) 322.65 317.6 Cms 41.47 41.54 Sens 85.9 84.7 Xmax 30 30 Cut Outs & Sizes Model NB5-12 Depth 8.750" Cutout 11.188" Overall Dia. 12.875" Displacement 0.21 ft3 Enclosure Design

The NB5 series (10", 12", & 15”) is a robust line up of 1000--1500 watt handling subwoofers. Starting with the motor design, we spent a lot of time optimizing the design to incorporate a large inner pole, upper and lower, Faraday shorting ring which helps to reduce any distortion caused by inductance throughout the movement range of the cone. We chose a 2.75” diameter coil that has a very long winding width, with the wire being made of flat aluminum. Overall, they have 27mm of excursion one way at 70% BL and have a 40mm of X-mech forward and 50mm downward x-mech clearance before soft parts crash into hard parts. The motor has 280 ounces of ferrite rings and utilizes a vented pole design with coil gap radial vents for moving heat quickly out of the gap. Mated to the motor is a heavy duty cast aluminum frame that serves as an excellent heat exchanger. As the motor gets hotter the mass of aluminum helps to dissipate the overall heat. Nomex spiders with heavy stitched in tinsel leads connect with the competition grade treated paper cone, and the heavy-duty foam surround that complete the make-up of this woofer. Features: 27mm of x-max one way at 70% BL Product RMS Power 1500 watts Available Coil Options: D2/D4 Vented magnetic gap Black Aluminum 2.75” voice coil for superior power handling High Temperature flat aluminum voice coil wire Large Aluminum ID Faraday Ring Chrome 4awg Push Terminals Stitched on Double Tinsel Leads Heavy Cast aluminum frame Extreme duty Nomex spiders Specifications: NB5-15d2 NB5-15d4 RE 3.44 6.088 FS 35.6 34.93 VAS 43.548 47.197 Qes 0.534 0.593 Qms 5.283 5.595 Qts 0.485 0.536 BL 27.33 30.789 Mms (g) 422.32 417.888 Cms 41.623 44.651

The NB2 Series of subs are class leading entry level subwoofers, with many features normally found only in higher end products. Starting with a double stacked magnet structure paired with a very long voice coil, the NB2 has an advantage. Reaching up to 14mm of linear Xmax One Way and 2” of mechanical movement clearance peak to peak, it assures a durable subwoofer. Cooling is optimized through computer simulations at first and then offering center pole Vent as well as Radial back plate holes for moving BTU’s out of the coil gap. To increase the power handling, we chose to use 500f degree coil adhesive and glue joints throughout the subwoofer. We chose a durable foam surround with a strong paper cone to move the sound pressures reliably. A rubber gasket, chrome push terminals, quality Cotton blend spider with stitched tinsel leads all round out the quality choices toward offering one of the very best entry level subwoofers on the market. Features: RMS Power 400 Watts 8”, 10” and 12” Sizes Xmax of up to 14mm one way at 70% BL High temperature 4 Layer copper voice coil Black aluminum 2” voice coil former Dual 4 ohm coil Rear radial coil gap cooling holes Center pole vent optimized for moving BTU’s Strong stamped steel frame with logo Quality chrome push terminals Flat stitched tinsel leads Specifications: NB2-8d4 RE 6.1 FS 37.335 VAS 6.955 Qes 0.515 Qms 3.417 Qts 0.448 BL 17.879 Mms (g) 117.442 Cms 119.005 Sens 83.7 Xmax 14   Cut Outs & Sizes Depth 5.000" Cutout 7.250" Overall Dia. 8.500" Displacement 0.07 ft3 Enclosure Design

The NB5 series 8 inch is a 800 watt rms subwoofer. Starting with the motor design, we spent a lot of time optimizing the design to incorporate a large inner pole, upper and lower, Faraday shorting ring which helps to reduce any distortion caused by inductance throughout the movement range of the cone. We chose a 2.50 diameter coil that has a very long winding width, with the wire being made of flat aluminum. Overall, they have 15mm of excursion one way at 70% BL and have a 28mm of X-mech forward and 50mm downward x-mech clearance before soft parts crash into hard parts. The motor has 180 ounces of ferrite rings and utilizes a vented pole design with coil gap radial vents for moving heat quickly out of the gap. Mated to the motor is a heavy duty cast aluminum frame that serves as an excellent heat exchanger. As the motor gets hotter the mass of aluminum helps to dissipate the overall heat. Nomex spiders with heavy stitched in tinsel leads connect with the competition grade treated paper cone, and the heavy-duty foam surround that complete the make-up of this woofer. Features: 15mm of x-max one way at 70% BL Product RMS Power 800 watts Available Coil Options: D2/D4 Vented magnetic gap Black Aluminum 2.50” voice coil for superior power handling High Temperature flat aluminum voice coil wire Large Aluminum ID Faraday Ring Chrome 4awg Push Terminals Stitched on Double Tinsel Leads Heavy Cast aluminum frame Extreme duty Nomex spiders Specifications: NB5-8d2 NB5-8d4 RE 3.6 6.8 FS 38.77 39.995 VAS 6.923 7.21 Qes 0.489 0.544 Qms 2.512 2.598 Qts 0.410 0.450 BL 20.23 22.541 Mms (g) 164.5 151.33 Cms 95.517 104.2 Sens 82.1 104.8 Xmax 17 17 Cut Outs & Sizes Model NB5-8 Depth 6.500" Cutout 7.375" Overall Dia. 8.625" Displacement 0.09 ft3 Enclosure Design

The Prodigy Audio NB2 Series Subwoofer by Prodigy Audio™ is a high-performance subwoofer featuring a 12-inch cone. Thiele-Small parameters:, Qts=0.457. Designed for deep bass reproduction and high SPL output.

The Prodigy Audio NB3 Series Subwoofer by Prodigy Audio™ is a high-performance subwoofer featuring a 12-inch cone with 3 voice coil configuration. Thiele-Small parameters:, Qts=0.485. Designed for deep bass reproduction and high SPL output.

The Prodigy Audio NB5 Series Subwoofer by Prodigy Audio™ is a high-performance subwoofer featuring a 8-inch cone. Thiele-Small parameters:, Qts=0.41. Designed for deep bass reproduction and high SPL output.