Pioneer Subwoofers

12" Component Subwoofer - 1400 max/400 nominal, IMPP™ cone produces tight and accurate bass, Specially designed Voice coil offers higher power handling

12” Dual 4 Ω Voice Coil Subwoofer - Glass fiber and mica interlaced Injection Molded Polypropylene (IMPP™ cone construction, Butyl rubber surround and polycotton / cotton dual spider for strength and linearity during high excursion, Oversized 60 oz double stacked magnet and vented pole yoke for increased power handling.

This Pioneer TS-A120S4E 12-inch car subwoofer has a 48mm voice coil that delivers powerful booming bass, a glass fiber reinforced cone to help enhance impact and clarity, and a rubber surround that improves stability, and a simple design which makes installation fast and easy.

The TS-A2000LB features a compact, space-saving enclosure designed for optimal use of space. The enclosure is shallow enough for mounting in a wide variety of vehicles, including pickup trucks with standard or extended-cab models. Its unique design allows it to be mounted upright, lying flat facing upwards, or configured in a down-firing position. The enclosure is fully carpeted with an embroidered Pioneer logo, creating a non-slip and scratch-resistant surface. This Shallow-Mount Pre-Loaded Enclosure provides a maximum power of 700 W with continuous 250 W RMS. The subwoofer features a glass fiber and mica interlaced, injection-molded polypropylene IMPP™ cone with a 2 Ω single voice coil. The subwoofer is also fully protected by a steel mesh grille. For installation flexibility, the feet and cushions are removable to enable different layout configurations to suit your vehicle’s application.

8” Shallow-Mount Subwoofer - 700 W Max Power (250 W Nominal) - Glass Fiber and Mica Reinforced IMPP™ cone, Double reinforced Spider, 8-AWG Push Terminals Rubber Surround

The TS-A2500LB features a compact, space-saving enclosure designed for optimal use of space. The enclosure is shallow enough for mounting in a wide variety of vehicles, including pickup trucks with standard or extended-cab models. Its unique design allows it to be mounted upright, lying flat facing upwards, or configured in a down-firing position. The enclosure is fully carpeted with an embroidered Pioneer logo, creating a non-slip and scratch-resistant surface. This Shallow-Mount Pre-Loaded Enclosure provides a maximum power of 1200 W with continuous 300 W RMS. The subwoofer features a glass fiber and mica interlaced, injection-molded polypropylene IMPP™ cone with a 2 Ω single voice coil. The subwoofer is also fully protected by a steel mesh grille. For installation flexibility, the feet and cushions are removable to enable different layout configurations to suit your vehicle’s application.

10" Shallow-Mount Subwoofer - 1200 W Max Power (300 W Nominal),Glass Fiber and Mica Reinforced IMPP™ cone, Double reinforced Spider, 8-AWG Push Terminals, Rubber Surround

10” Dual 4 Ω Voice Coil Subwoofer - glass fiber and mica interlaced Injection Molded Polypropylene IMPP™ cone construction, Butyl rubber surround and aramid fiber spider for strength and linearity during high excursion, Oversized 56 oz double stacked magnet and vented pole yoke for increased power handling

10” Component Subwoofer - 1200 W Max Power (350 W Nominal), IMPP™ cone produces tight and accurate bass, Specially designed Voice coil offers higher power handling

The TS-A3000LB features a compact, space-saving enclosure designed for optimal use of space. The enclosure is shallow enough for mounting in a wide variety of vehicles, including pickup trucks with standard or extended-cab models. Its unique design allows it to be mounted upright, lying flat facing upwards, or configured in a down-firing position. The enclosure is fully carpeted with an embroidered Pioneer logo, creating a non-slip and scratch-resistant surface. This Shallow-Mount Pre-Loaded Enclosure provides a maximum power of 1500 W with continuous 400 W RMS. The subwoofer features a glass fiber and mica interlaced, injection-molded polypropylene IMPP™ cone with a 2 Ω single voice coil. The subwoofer is also fully protected by a steel mesh grille. For installation flexibility, the feet and cushions are removable to enable different layout configurations to suit your vehicle’s application.

12" Shallow-Mount Subwoofer - 1500 W Max Power (400 W Nominal), Unique Design with just 3-1/2" Mounting Depth, Small Enclosure Use (0.5 ~ 1.0 cu. ft.), 4 Ω Single Voice Coil, Glass Fiber and Mica Reinforced IMPP™ cone, Double reinforced Spider, 8-AWG Push Terminals

TS-A301D4 12" Dual Voice Coil Subwoofer The Champion Series subwoofers have evolved from Pioneer’s award-winning “SPL Champion Edition” lineup, known for its deep and powerful bass production. The TS-A301D4 12” dual-voice coil subwoofer features a redesigned large and powerful 90 oz double-stack magnet for improved efficiency and sensitivity. The subwoofer baskets are optimized with a reinforced structure design for added strength and reduced vibration, delivering excellent sound quality. This subwoofer has a continuous power of 500 watts with a maximum peak of 1,600 watts. It features an advanced 2-piece cone designed with a highly rigid and durable Honeycomb IMPP™ composite cone structure, plus a rigid drive cone to deliver high output levels with reduced distortion.

The Champion Series subwoofers have evolved from Pioneer’s award-winning “SPL Champion Edition” lineup, known for its deep and powerful bass production. The TS-A301S4 12” dual-voice coil subwoofer features a redesigned large and powerful 90 oz double-stack magnet for improved efficiency and sensitivity. The subwoofer baskets are optimized with a reinforced structure design for added strength and reduced vibration, delivering excellent sound quality. This subwoofer has a continuous power of 500 watts with a maximum peak of 1,600 watts. It features an advanced 2-piece cone designed with a highly rigid and durable Honeycomb IMPP™ composite cone structure, plus a rigid drive cone to deliver high output levels with reduced distortion.

12" - 1400 W Max Power (400 W Nominal), IMPP cone produces tight and accurate bass, Specially designed Voice coil offers higher power handling - Component Subwoofer

The TS-D10D2 10" subwoofer can handle up to 500 W RMS, delivering impressive low-frequency levels. This subwoofer features an injection-molded polypropylene (IMPP™) cone infused with Aramid fibers for exceptional precision and strength. A butyl rubber surround supports the subwoofer during cone excursion, ensuring accurate, hard-hitting bass notes even at high volumes. When setting up your system, the dual 2Ω voice coils of this subwoofer provide more wiring options.

The TS-D10D4 10" subwoofer can handle up to 500 W RMS, delivering impressive low-frequency levels. This subwoofer features an injection-molded polypropylene (IMPP™) cone infused with Aramid fibers for exceptional precision and strength. A butyl rubber surround supports the subwoofer during cone excursion, ensuring accurate, hard-hitting bass notes even at high volumes. When setting up your system, the dual 4Ω voice coils of this subwoofer provide more wiring options.

There is nothing like a good subwoofer to bring out the full range and power of your favorite music. The TS-D10LB shallow-mount sealed subwoofer enclosure is perfect for areas where a 10” subwoofer will not fit. The enclosure is sized for spots as shallow as 6" deep, so the bass you need will fit into trucks and smaller cars. Its carpet covering and steel mesh grille help protect the subwoofer and give it a clean, finished look. This subwoofer features an injection-molded polypropylene IMPP™ cone reinforced with aramid fiber, designed to remain stable even at high volume levels. The butyl rubber surround helps minimize distortion, and the stamped steel basket adds rigidity, ensuring the bass stays accurate. With up to 350 watts RMS power handling, you will have enough power to crank up the volume. Its 2-ohm voice coil allows optimization with most mono subwoofer amplifiers to obtain the best output.

If your vehicle’s audio system is not giving you the sound you want, the TS- D10LS2 10" shallow-mount subwoofer might be what you are looking for. It was built to handle up to 350 W RMS with the ability to deliver impressive low frequencies. This subwoofer features an injection-molded polypropylene IMPP™ cone infused with Aramid fibers for exceptional precision and strength. The butyl rubber surround supports the subwoofer during cone excursion resulting in low distortion of the bass notes even when the music is turned up loud. With a mounting depth of only 3-5/16”, this subwoofer will fit in spaces regular subwoofers will not. This subwoofer has a 2Ω impedance useful for getting most out of a mono amp or for building multi-subwoofer installations.

If your vehicle’s audio system is not giving you the sound you want, the TS-D10LS4 10" shallow-mount subwoofer might be what you are looking for. It was built to handle up to 350 W RMS with the ability to deliver impressive low frequencies. This subwoofer features an injection-molded polypropylene IMPP™ cone infused with Aramid fibers for exceptional precision and strength. The butyl rubber surround supports the subwoofer during cone excursion resulting in low distortion of the bass notes even when the music is turned up loud. With a mounting depth of only 3-1/4”, this subwoofer will fit in spaces regular subwoofers will not. This subwoofer has a 4Ω impedance useful when bridging amp or for building multi-subwoofer installations.

The TS-D12D2 12" subwoofer can handle up to 600 W RMS, delivering impressive low-frequency levels. This subwoofer features an injection-molded polypropylene IMPP™ cone infused with Aramid fibers for exceptional precision and strength. A butyl rubber surround supports the subwoofer during cone excursion, ensuring accurate, hard-hitting bass notes even when the music is turned up loud. When setting up your system, the dual 2Ω voice coils of this subwoofer provide more wiring options.

The TS-D12D4 12" subwoofer can handle up to 600 W RMS, delivering impressive low-frequency levels. This subwoofer features an injection-molded polypropylene IMPP™ cone infused with Aramid fibers for exceptional precision and strength. A butyl rubber surround supports the subwoofer during cone excursion, ensuring accurate, hard-hitting bass notes even when the music is turned up loud. When setting up your system, the dual 4Ω voice coils of this subwoofer provide more wiring options.

TS-W3020PRO 12" Subwoofer with 3500 W Max Power The Pioneer P.R.O. (Pioneer Reference for Open Show) series of speakers is designed specifically for those looking to produce serious sound pressure levels. Inspired by Pioneer’s history of record-breaking SPL competition, the new P.R.O. Series line of speakers is constructed with the street enthusiast in mind. Emphasizing efficiency and power handling, the P.R.O. series lineup consists of bullet tweeters, mid-bass drivers, and a subwoofer that can be mixed and matched to deliver impressive output without requiring a significant investment.The TS-W3020PRO 12" is a high-efficiency subwoofer with a maximum power of 3,500 W (1,800 W nominal), featuring an optimally blended pulp woofer cone, a motor (magnet and voice coil), and a basket structure designed for high efficiency (dB) and high power.

Compact in size, yet able to produce powerful and impactful bass, the TS-WX010A compact powered subwoofer is a perfect upgrade for many of today’s vehicles, especially EVs (electric vehicles) and gasoline/electric hybrid vehicles where low weight, small size, and low power consumption are priorities. Measuring only 9 inches wide, 4-5/8 inches deep, and 2-3/4 inches high, and weighing just under 3-1/2 pounds, the TS-WX010A has been optimized for installation in the passenger side footwell and is the smallest and lightest powered subwoofer in the Pioneer lineup.

The TS-WX1010A is a powerful, sealed, pre-loaded subwoofer enclosure. It features a built-in, high-output, low-distortion 1100 W Max Class D amplifier paired with a 10" subwoofer that has a urethane surround and an oversized magnet structure, specifically optimized for use in sealed enclosures. User-adjustable controls include an LPF, phase control, variable bass boost level, and bass boost to provide enhanced subwoofer control. To expand system flexibility and user control, the output volume can be adjusted using the included wired remote bass control knob.

10" Pre-loaded compact subwoofer system - Lightweight polymide (PI) tweeter diaphragm loaded uniquely shaped wave guide provides natural loaded clear vocals subwoofer wide dispersion.

Small in size yet able to produce powerful and impactful bass, the TS-WX140DA compact active subwoofer is a perfect upgrade for many of today’s vehicles where small size and low power consumption are priorities. Featuring a powerful, built-in 170 W (max) Class D amplifier, a down-firing 8" x 5.25" rectangular subwoofer, and Pioneer's DIGITAL BASS CONTROL, the TS-WX140DA can be tuned to your listening preferences and vehicle acoustics. The TS-WX140DA also has multiple input options, allowing connectivity to both aftermarket and OE (Original Equipment) car audio systems.

Small in size yet able to produce powerful and impactful bass, the TS-WX400DA compact active subwoofer is a perfect upgrade for many of today’s vehicles where small size and low power consumption are priorities. Featuring a powerful, built-in 250 W Max (100 W RMS) Class D amplifier, a down-firing 9" x 5.5" rectangular subwoofer, and Pioneer's DIGITAL BASS CONTROL, the TS-WX400DA can be tuned to your listening preferences and vehicle acoustics. The TS-WX400DA also has multiple input options, allowing connectivity to both aftermarket and OE (Original Equipment) car audio systems.

The Z-Series is designed for high fidelity, high output, and ease of installation. The TS-Z10LS2 10" subwoofer will handle up to 400 W RMS. The shallow basket design allows installation in places where an ordinary subwoofer will not fit. The oversized dual-layer cone of Twaron aramid fiber and cellulose fiber supported by a tough butyl rubber surround delivers accurate, hard-hitting bass notes even when the music is turned up loud. The lightweight die-cast aluminum basket provides an incredibly stable housing for the subwoofer, without any coloration. Its 2-Ω voice coil makes provides system flexibility when using multiple subwoofers with a single amplifier.

The Z-Series is designed for high fidelity, high output, and ease of installation. The TS-Z10LS4 10" subwoofer will handle up to 400 W RMS. The shallow basket design allows installation in places where an ordinary subwoofer will not fit. The oversized dual-layer cone of Twaron aramid fiber and cellulose fiber supported by a tough butyl rubber surround delivers accurate, hard-hitting bass notes even when the music is turned up loud. The lightweight die-cast aluminum basket provides an incredibly stable housing for the subwoofer, without any coloration. Its 4-Ω voice coil makes it a great match for most amplifiers.