Home/Equipment/Subwoofers/Incriminator Audio

Incriminator Audio Subwoofers

Incriminator Audio is an American SPL and competition-focused car audio manufacturer based in Killen, Alabama. Founded in 2002 by Nick Wright, an audio enthusiast and engineer, the company specializes in high-excursion subwoofers designed for extreme output. Their lineup includes the flagship Death Penalty series (produced since 2002), along with the popular Death Row, Lethal Injection, Judge, Warden, and Tyrant series. Operating under the motto 'Performance Over Hype,' Incriminator Audio has earned respect in the bass competition community for subwoofers that deliver massive output with over-built motor structures and competition-proven durability.

21 Products

Visit Website Hide Historical Models

BL12D2

The Incriminator Audio BL12D2 is a high-performance subwoofer featuring a 12-inch cone with dual 2 voice coil configuration. Rated at 750W RMS. Designed for deep bass reproduction and high SPL output.

Bolo

Our IA Bolo will be the go to sub for those who want an outstanding brand that puts everything into design and performance.

D1/D2

The Incriminator Audio D1/D2 is a high-performance subwoofer featuring a 12-inch cone with dual 2 voice coil configuration. Designed for deep bass reproduction and high SPL output.

D2/D4

The Incriminator Audio D2/D4 is a high-performance subwoofer featuring a 12-inch cone with dual 2 voice coil configuration. Rated at 750W RMS. Designed for deep bass reproduction and high SPL output.

Death Row DR15 D1/D2 15" 1500W Subwoofer

The Incriminator Audio Death Row DR15 D1/D2 15" 1500W Subwoofer is a high-performance subwoofer featuring a 15-inch cone with dual 2 voice coil configuration. Rated at 1500W RMS. Designed for deep bass reproduction and high SPL output.

DR12

The Incriminator Audio DR12 is a high-performance subwoofer featuring a 12-inch cone with dual 2 voice coil configuration. Rated at 1500W RMS. Designed for deep bass reproduction and high SPL output.

DR15

The Incriminator Audio DR15 is a high-performance subwoofer featuring a 15-inch cone with dual 2 voice coil configuration. Rated at 1500W RMS. Designed for deep bass reproduction and high SPL output.

FL12

The Incriminator Audio FL12 is a high-performance subwoofer featuring a 12-inch cone with dual 2 voice coil configuration. Rated at 600W RMS. Designed for deep bass reproduction and high SPL output.

Flatlyne

The Flatlyne is an under-hung sound quality based neo cup motor subwoofer that will reproduce low octave tones with unmatched accuracy.

I Series 10 |500 RMS| Dual 4 Ohm

Introducing the all new Incriminator Audio I Series subwoofers. These are not mere entry level subs, these are Incriminator subwoofers, making nothing about them entry level. The I Series subwoofer line is the “gateway” level subwoofer. Gateway, as it is affordable enough for anyone to have the opportunity to run a premium brand subwoofer, as well as the I Series opens the gates to the world of Incriminator. As a number of people can attest to, once they have experienced the IA quality and performance, there is no looking back. The I Series from IA is the “gateway drug” to cleaner and more powerful bass compared to the big name brands. The I Series is all business when it comes to performance and functionality, no effort was wasted on flashy looks to trick the people who are new to the high performance car audio game. This means when others subs are failing from flimsy cones or weak motors, the I-series will keep on performing at a high level for a long time to come. New updates include a larmore powerful double magnet motor structure that grew by ½” overall. With that larger motor also comes a larger voice coil, which is now an Aluminum 4 layer coil that is 2.5” in diameter. These bump the power rating up to a very respectable 500 watts rms. The I Series now flaunts larger woven leads and dual black progressive spiders for better current flow and greater durability. To help handle the extra power and abuse, the I Series has been upgraded with improved cooling through new side venting. Available in both Dual 2 ohm and Dual 4 ohm voice coils for flexibility in different installs, as well as 10” & 12” cone sizes. More aspects showing the I-series is far from entry, it comes standard with nickel plated terminals and nickel coated back plate, a dual layer surround, and an Injected Pulp Matrix Fiber Reinforced Cone. A deeper look into the specs of the I Series, shows it is no slouch when it comes to capability. Starting with an impressive 28mm p2p of Xmax, moderate Qts. giving the I Sxibility in both ported and sealed enclosures, as well as a very modest mounting depth which is huge for shallower enclosures or smaller boxes. All of this adds up to showing that if you require a higher standard of performance and quality, that is far from entry level, move through the gateway to better performance and quality with the Incriminator Audio I Series.SpecificationsDriver10 InchFS36 HzRe8Ω SeriesQms4.79Qes0.51Qts0.49Mms139 gCms.131 mm/NSd380 cm²Vas27 LSpl87.3 db 1w/1mBL14 TMX-max28 mm p2pSub Diameter10."Mounting8.74"Depth4.87"Displacement.10 Cu. Ft.Power500 RMSEnclosure SpecificationsMinimum VolumeRecommended VolumeMaximum VolumeSealed0.60ft^30.80ft^31.00ft^3Ported1.00ft^31.40ft^31.80ft^3Port Opening15in^2 (3.0" x 5.0")20in^2 (3.0" x 6.67")25in^2 (3.0" x 8.34")Port Length29.75"27.75"26.5"Port Tuning35hz35hz35hzPort Displacement0.26ft^30.32ft^30.38ft^3Sub Displacement0.10ft^30.10ft^30.10ft^3Subsonic Filter32hz - Setting32hz - Setting32hz - SettingLow Pass Filter80hz - Setting80hz - Setting80hz - Setting

I Series 12 |500 RMS| Dual 2 Ohm

FINAL SALE, NO RETURNS Introducing the all new Incriminator Audio I Series subwoofers. These are not mere entry level subs, these are Incriminator subwoofers, making nothing about them entry level. The I Series subwoofer line is the “gateway” level subwoofer. Gateway, as it is affordable enough for anyone to have the opportunity to run a premium brand subwoofer, as well as the I Series opens the gates to the world of Incriminator. As a number of people can attest to, once they have experienced the IA quality and performance, there is no looking back. The I Series from IA is the “gateway drug” to cleaner and more powerful bass compared to the big name brands. The I Series is all business when it comes to performance and functionality, no effort was wasted on flashy looks to trick the people who are new to the high performance car audio game. This means when others subs are failing from flimsy cones or weak motors, the I-series will keep on performing at a high level for a long time to come. New updates include a larmore powerful double magnet motor structure that grew by ½” overall. With that larger motor also comes a larger voice coil, which is now an Aluminum 4 layer coil that is 2.5” in diameter. These bump the power rating up to a very respectable 500 watts rms. The I Series now flaunts larger woven leads and dual black progressive spiders for better current flow and greater durability. To help handle the extra power and abuse, the I Series has been upgraded with improved cooling through new side venting. Available in both Dual 2 ohm and Dual 4 ohm voice coils for flexibility in different installs, as well as 10” & 12” cone sizes. More aspects showing the I-series is far from entry, it comes standard with nickel plated terminals and nickel coated back plate, a dual layer surround, and an Injected Pulp Matrix Fiber Reinforced Cone. A deeper look into the specs of the I Series, shows it is no slouch when it comes to capability. Starting with an impressive 28mm p2p of Xmax, moderate Qts. giving the I Sxibility in both ported and sealed enclosures, as well as a very modest mounting depth which is huge for shallower enclosures or smaller boxes. All of this adds up to showing that if you require a higher standard of performance and quality, that is far from entry level, move through the gateway to better performance and quality with the Incriminator Audio I Series.SpecificationsDriver12 InchFS34 HzRe8Ω SeriesQms4.76Qes0.58Qts0.55Mms154 gCms.145 mm/NSd530 cm²Vas51 LSpl89.2 db 1w/1mBL14 TMX-max28 mm p2pSub Diameter12."Mounting10.63"Depth5.50"Displacement.11 Cu. Ft.Power500 RMSEnclosure SpecificationsMinimum VolumeRecommended VolumeMaximum VolumeSealed1.00ft^31.20ft^31.40ft^3Ported1.50ft^32.00ft^32.50ft^3Port Opening22in^2 (1.75" x 12.5")28in^2 (2.25" x 12.5")35in^2 (2.80" x 12.5")Port Length26.25"26.25"26.00"Port Tuning35hz35hz35hzPort Displacement0.33ft^30.43ft^30.53ft^3Sub Displacement0.11ft^30.11ft^30.11ft^3Subsonic Filter32hz - Setting32hz - Setting32hz - SettingLow Pass Filter80hz - Setting80hz - Setting80hz - Setting

I10

The Incriminator Audio I10 is a high-performance subwoofer featuring a 10-inch cone. Designed for deep bass reproduction and high SPL output.

i10D4

The Incriminator Audio i10D4 is a high-performance subwoofer featuring a 10-inch cone with dual 4 voice coil configuration. Rated at 500W RMS. Designed for deep bass reproduction and high SPL output.

i12D4

The Incriminator Audio i12D4 is a high-performance subwoofer featuring a 12-inch cone with dual 4 voice coil configuration. Rated at 500W RMS. Designed for deep bass reproduction and high SPL output.

J12

The Incriminator Audio J12 is a high-performance subwoofer featuring a 12-inch cone with dual 2 voice coil configuration. Rated at 2500W RMS. Designed for deep bass reproduction and high SPL output.

J18

The Incriminator Audio J18 is a high-performance subwoofer featuring a 18-inch cone with dual 2 voice coil configuration. Rated at 2500W RMS. Designed for deep bass reproduction and high SPL output.

Judge

Incriminator Audio product designed for serious SPL competition and high-output applications. Premium construction with heavy-duty motor structures and high-temperature voice coils. Engineered for extreme power handling and reliable performance under demanding conditions.

Lethal Injection R3 10 |1000 RMS| Dual 4 Ohm

The original Lethal Injection was known for being one of the loudest, best sounding, bang for the buck woofers available in 2003. Ten years later, the 2017 model Lethal Injection is nothing short of the original. In fact, the new LI surpasses the original in every way. Every part has been upgraded to be stronger, better sounding, and LOUDER than ever before!! As customer’s power demands have grown so has the Lethal, now officially rated at 1000 Watts RMS. To handle that extra power we upgraded the coil and added additional ½” in winding width, upgraded to a slightly stiffer suspension, and increased the motor to a 7.25” diameter for extra motor strength to offset that new rugged suspension, as well as increased motor gap vent cooling with Air-Driven Cooling (ADC) and supplemental rear side vents. The finishing touch is the new embossed Incriminator Audio logo on the dustcap sporting nothing more than blue and silver. Available in Dual 2 and Dual 4 standard as well a 10”, 12”, 15” and now 18” mtyle type="text/css"> table.tableizer-table { font-size: 12px; border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #CCC; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }SpecificationsDriver10 InchFS33 HzRe4Ω SeriesQms4.33Qes0.42Qts0.39Mms210 gCms0.14 mm/NSd320 cm²Vas14 LSpl85.4 dBBL16.6X-max23 mmSub Diameter10."Mounting9.25"Depth6.12"Displacement.12 Cu. Ft.Power1000 RMSEnclosure SpecificationsMinimum VolumeRecommended VolumeMaximum VolumeSealed0.60ft^30.80ft^31.00ft^3Ported1.00ft^31.25ft^31.500ft^3Port Opening14in^2 (1.35" x 10.50")18in^2 (1.70" x 10.50")21in^2 (2.00" x 10.50")Port Length28.0"27.75"27.00"Port Tuning35hz35hz35hzPort Displacement0.22ft^30.29ft^30.33ft^3Sub Displacement0.12ft^30.12ft^30.12ft^3Subsonic Filter32hz - Setting32hz - Setting32hz - SettingLow Pass Filter80hz - Setting80hz - Setting80hz - Setting

Tyrant R1 15 |5000 RMS| Dual 1 Ohm

The rumors are true, Incriminator Audio has finally made a 4” coil, tornado starting, demo beast. Our long awaited Tyrant is finally here. Our first all-new model from the ground up in a long time, and the wait was worth it. We really took our time to make sure the Tyrant will be the absolute best option when it comes to the 4” coil, massive air moving, deep bass subs. Our Incriminator design team dug deep and pulled out all the stops when it came to putting the Tyrant together. 5,000 watts rms is nothing to be scared of, if you have the power, the Tyrant can handle it and then some. At Incriminator, for decades, we have established a reputation of being a go-to for elite level 3” coil subwoofers through the Death Row, Death Penalty, Judge, and Warden. We wanted to take all of that bass experience and scale it up for the mega power, hair shredding demo installs. That was when the Tyrant was born. Coming standard with the shredder package, not only sets the Tyrant apart in looks, but extreme performance too. That scaling up means a mega ton sized motor providing tremendous motor force to keep the 8-layer, 4” Reserve coil in check. That huge coil that is riding with multi layer 10” progressive spiders to eke out every bit of Xmax we could for the deepest of notes that will turn glass into liquid and metal doors into rippled waves. We gave the Tyrant 4 AWG terminals for ease of speaker wire connection. Not many speakers have 4 gauge speaker wire connections. This will aid in current flow and make life easier for the hooking up of powerful amplifiers that have 4 gauge speaker outs. When ridiculous power, tidal waves of air, and pure bass fun is the goal, the Incriminator Audio Tyrant is the new and feared oppressor of all who challenge. A “Tyrant” by definition, is an absolute ruler, and that is what you can be if you choose to step to the Tyrant, absolutely rule the demo world. Specifications coming soon...

Warden R4

The Warden R4 is a purpose built, no holds barred, pure SPL monster rated at 3500 watts.

IA40

Legacy

The Incriminator Audio IA40 is a high-performance subwoofer featuring a 40-inch cone. Rated at 4800W RMS. Designed for deep bass reproduction and high SPL output.