Ampere Audio Subwoofers

AA 2.0 SERIES SUBWOOFERS The AA 2.0 Series was designed for listeners who want real aftermarket bass performance without sacrificing sound quality, efficiency, or everyday usability. Engineered for clean low-frequency response and dependable output, the 2.0 platform delivers the kind of impact that transforms a factory audio system into something far more capable and engaging. Every AA 2.0 subwoofer is built around a strong steel basket, paper and foam cone assembly, carbon fiber dust cap, and a 2-inch 4-layer copper voice coil. This combination gives the 2.0 platform the balance needed for strong daily output, musical response, and long-term reliability in real-world installations. The dual magnet motor structure and 14 mm of XMAX allow the AA 2.0 Series to deliver clean, controlled bass with the output and authority expected from a serious aftermarket subwoofer. Whether installed in a compact daily system or a stronger low-frequency setup, the 2.0 platform was built to provide balanced performance, musical response, and long-term durability. The AA 2.0 Series serves as the foundation of the AA subwoofer lineup, combining clean design, proven construction, and dependable low-frequency performance into a platform built for enthusiasts who want more from their everyday system. FEATURES 500 Watts RMS power handling Steel basket construction Paper and foam cone assembly Carbon fiber dust cap Progressive cotton spider 2” 4-layer copper voice coil 33mm winding height Dual 40 oz magnet motor structure 14 mm Xmax Designed for daily-driven audio systems Built for clean, dependable low-frequency output Available in Dual 2 Ohm and Dual 4 Ohm configurations ENGINEERED FOR EVERYDAY PERFORMANCE The AA 2.0 Series was engineered to deliver stronger low-frequency performance than factory and entry-level aftermarket systems while maintaining the responsiveness and musical accuracy needed for everyday listening. Its lightweight cone assembly, copper voice coil, and balanced motor structure work together to produce clean bass across a wide range of music styles. From compact 8-inch enclosures to stronger 10-inch and 12-inch systems, the AA 2.0 platform delivers the output, control, and reliability needed for enthusiasts building a well-rounded daily audio system.

1000W RMS DVC Premium Subwoofer 1000W RMS - Conservatively Rated Available in 15" and 18" Dual 2 or 4 ohm voice coils Aluminum 2.75” Voice Coil Spring-loaded terminals Vented magnetic gap High-velocity vented frame spacer ring Large aluminum Faraday ring for smooth acoustic response Patented high-strength cast aluminum frame High-temperature voice coil wire Spring-loaded terminals Stitched-on double “XL” tinsel lead wires The AA-2.75 is the first offering of our new and improved lineup and is a high-performance subwoofer, engineered for superior audio precision and durability, designed to meet the demands of professional and enthusiast-level builds. Featuring a robust design and advanced materials, it guarantees exceptional thermal and acoustic performance. 1000W RMS Power Rating: Conservatively rated to deliver sustained high output with minimal thermal compression. Dual 2 or 4 Ohm Voice Coils: Impedance options enable optimized integration with various amplifier setups for maximum efficiency and output. 2.75” Aluminum Voice Coil: Large-diameter coil wound on a lightweight, high-temperature aluminum former ensures excellent thermal dissipation and linear performance under heavy load. Spring-Loaded Terminals: High-tension spring contacts ensure reliable connections and streamline installation processes. Vented Magnetic Gap: Incorporates a precision-machined gap with cooling vents to prevent power compression and maintain consistent magnetic flux density. Advanced Structural and Acoustic Features High-Velocity Vented Frame Spacer Ring: Facilitates enhanced airflow around the voice coil for superior cooling, reducing thermal fatigue. Aluminum Faraday Ring: A large, low-inductance ring minimizes electromagnetic distortion, achieving a flatter impedance curve and smoother frequency response. Patented Cast Aluminum Frame: High-strength, non-resonant structure optimizes rigidity while minimizing weight for reduced mechanical losses. High-Temperature Voice Coil Wire: Coated with advanced heat-resistant materials, the voice coil withstands prolonged high-power operation without degradation. Double "XL" Tinsel Lead Wires: Stitched directly into the spider, these oversized leads enhance current handling capacity and resist fatigue under high excursion conditions. With meticulous attention to thermal management and mechanical stability, this subwoofer is designed to be an everyday performance monster. Its innovative construction ensures long-term reliability and precise acoustic output, making it ideal for professional-grade installations and high-performance audio systems. Specifications T/S SPECS AA-2.75 15″ D2 AA-2.75 15″ D4 AA-2.75 18″ D2 AA-2.75 18″ D4 RE (Ohms) 3.89 5.83 3.97 6.06 FS (Hz) 36.8387 37.416 29.051 31.868 VAS (L) 51.9387 45.3391 114.234 106.964 Qes 0.5847 0.6963 0.424 0.458 Qms 5.1005 5.7094 3.052 2.853 Qts 0.5245 0.6206 0.372 0.395 Le (mH) 3.6326 4.7903 3.6326 4.7903 BL (NA) 24.4656 29.1578 32.523 38.159 Mms (Grams) 388.9706 431.9464 619.174 549.519 Cms (uM/N) 47.986 41.8886 48.474 45.389 Sens (dB @ 1w/1m) 88.22 87.08 90.1 90.7 Xmax 19mm 19mm 19mm 19mm

1000W RMS DVC Premium Subwoofer 1000W RMS - Conservatively Rated Available in 10"-18" 10" and 12" include carbon fiber dustcap 15" and 18" include printed dustcap Dual 2 or 4 ohm voice coils Aluminum 2.75” Voice Coil Spring-loaded terminals Vented magnetic gap High-velocity vented frame spacer ring Large aluminum Faraday ring for smooth acoustic response Patented high-strength cast aluminum frame High-temperature voice coil wire Spring-loaded terminals Stitched-on double “XL” tinsel lead wires The AA-2.75 is the first offering of our new and improved lineup and is a high-performance subwoofer, engineered for superior audio precision and durability, designed to meet the demands of professional and enthusiast-level builds. Featuring a robust design and advanced materials, it guarantees exceptional thermal and acoustic performance. 1000W RMS Power Rating: Conservatively rated to deliver sustained high output with minimal thermal compression. Dual 2 or 4 Ohm Voice Coils: Impedance options enable optimized integration with various amplifier setups for maximum efficiency and output. 2.75” Aluminum Voice Coil: Large-diameter coil wound on a lightweight, high-temperature aluminum former ensures excellent thermal dissipation and linear performance under heavy load. Spring-Loaded Terminals: High-tension spring contacts ensure reliable connections and streamline installation processes. Vented Magnetic Gap: Incorporates a precision-machined gap with cooling vents to prevent power compression and maintain consistent magnetic flux density. Advanced Structural and Acoustic Features High-Velocity Vented Frame Spacer Ring: Facilitates enhanced airflow around the voice coil for superior cooling, reducing thermal fatigue. Aluminum Faraday Ring: A large, low-inductance ring minimizes electromagnetic distortion, achieving a flatter impedance curve and smoother frequency response. Patented Cast Aluminum Frame: High-strength, non-resonant structure optimizes rigidity while minimizing weight for reduced mechanical losses. High-Temperature Voice Coil Wire: Coated with advanced heat-resistant materials, the voice coil withstands prolonged high-power operation without degradation. Double "XL" Tinsel Lead Wires: Stitched directly into the spider, these oversized leads enhance current handling capacity and resist fatigue under high excursion conditions. With meticulous attention to thermal management and mechanical stability, this subwoofer is designed to be an everyday performance monster. Its innovative construction ensures long-term reliability and precise acoustic output, making it ideal for professional-grade installations and high-performance audio systems.

1000W RMS DVC Premium Subwoofer ReconePlease note: Includes a Blank Dustcap Built for serious SPL setups and bass heads who demand more, the Ampere Audio AA-2.75 RVE Series car subwoofer delivers powerful, clean low-end with up to 1000W RMS of relentless output. As one of the most rugged car audio components on the market, this sub is available in both 15 inch car subwoofers and 18″ sizes, featuring dual 2Ω or 4Ω voice coils for flexible wiring. Its massive 2.75″ high-temp aluminum voice coil, stitched XL tinsel leads, and vented motor structure make it a go-to car audio solution for SPL competitors and high-output daily drivers. A cast aluminum frame ensures strength under pressure, while a large Faraday ring minimizes distortion during heavy bass drops. Whether you're upgrading your system or building a wall, the AA-2.75 is a high-performance car subwoofer designed to dominate. Push limits, hit harder, and feel every beat—this is next-level bass.

The AA 2.75 8” was built for enthusiasts who want serious low-frequency performance in a compact platform. Designed to deliver strong output, clean response, and dependable control, this driver gives smaller systems the authority and impact normally expected from larger subwoofers. Built around a cast aluminum basket, paper and foam cone assembly, carbon fiber dust cap, and upgraded suspension system, the AA 2.75 8” brings a more serious level of construction to compact bass applications. Its 2.5-inch 4-layer copper voice coil and dual 80 oz motor structure provide the strength, thermal capacity, and control needed for high-output daily systems. With 19mm of XMAX and a reinforced suspension package using three layer progressive spiders, the AA 2.75 8” is designed to move with authority while maintaining stability under excursion. Whether used in a space-limited daily build, truck enclosure, or compact high-output system, this driver delivers the kind of low-end performance that proves an 8-inch subwoofer can still be serious. The AA 2.75 8” is the compact powerhouse of the AA lineup — small enough for tight installs, strong enough for real bass, and built with the same attention to control and durability that defines the 2.75 platform. FEATURES800 Watts RMS power handlingCast aluminum basketPaper and foam cone assemblyCarbon fiber dust capThree layer progressive spider pack2.5” 4-layer copper voice coil45mm winding heightDual 80 oz magnet motor structureChrome top and back plates19mm XMAXDesigned for compact high-output systemsBuilt for clean, controlled daily bassAvailable in Dual 2 Ohm and Dual 4 Ohm configurations ENGINEERED FOR COMPACT OUTPUT The AA 2.75 8” is ideal for systems where space is limited but performance still matters. Its compact frame, upgraded motor structure, and high-excursion suspension allow it to deliver strong low-frequency output without requiring the enclosure space of a larger subwoofer. From under-seat truck applications to compact daily

AA 3.0 SERIES SUBWOOFERS The AA 3.0 Series was built for enthusiasts who demand more from their equipment. More output. More control. More durability under real-world abuse. Designed around a competition-inspired motor and suspension platform, the 3.0 Series delivers deep, authoritative low-frequency response with the composure required for high-power daily systems and demo-focused builds alike. At the core of every AA 3.0 subwoofer is a high-force 4-stack ferrite motor paired with a 3-inch flat-wound 4-layer CCA voice coil featuring an extended 65mm winding height. This combination was engineered to improve thermal stability, maintain motor strength throughout excursion, and deliver consistent performance during long demo sessions and sustained high-output use. The reinforced cast aluminum basket and triple-layer progressive suspension system work together to keep the moving assembly controlled under heavy excursion while maintaining the mechanical precision needed for clean and repeatable low-frequency reproduction. Combined with the lightweight carbon fiber cone assembly and oversized foam surround, the AA 3.0 is capable of moving serious air while remaining responsive and composed at full tilt. From daily-driven systems to competition-inspired builds, the AA 3.0 platform was designed to perform under pressure. The deep mechanical structure, oversized motor assembly, and high-excursion suspension give the 3.0 Series the ability to deliver aggressive low-end output without sacrificing reliability or control. This is a purpose-built high-output platform engineered for enthusiasts who expect their equipment to stay composed under abuse, deliver authority at every volume level, and perform every time the system is pushed to its limits. FEATURES •             2000 Watts RMS power handling •             High-strength cast aluminum basket •             Carbon fiber reinforced cone assembly •             Carbon fiber dust cap •             Triple-layer progressive suspension •             3” flat-wound 4-layer CCA voice coil •             Extended 65mm winding height •             High-force 4-stack ferrite motor assembly •             Oversized chrome top and back plates •             High-excursion foam surround •             Competition-inspired mechanical architecture •             Engineered for high-output daily and demo systems •             Available in Dual 1 Ohm and Dual 2 Ohm configurations ENGINEERED FOR REAL-WORLD OUTPUT The AA 3.0 platform was developed for enthusiasts building systems that are expected to perform consistently under real power. Whether installed in a daily-driven demo vehicle or a dedicated high-output build, the 3.0 Series was engineered to maintain control, stability, and reliability when pushed hard. Every component was selected with long-term durability and sustained performance in mind — from the oversized motor assembly and reinforced suspension to the high-temperature flat-wound voice coil architecture. The result is a subwoofer platform capable of delivering commanding low-frequency response with the confidence and consistency serious bass enthusiasts expect.

Built for serious SPL setups and bass heads who demand more, the Ampere Audio AA-2.75 RVE Series car subwoofer delivers powerful, clean low-end with up to 1000W RMS of relentless output. As one of the most rugged car audio components on the market, this sub is available in both 15 inch car subwoofers and 18″ sizes, featuring dual 2Ω or 4Ω voice coils for flexible wiring. Its massive 2.75″ high-temp aluminum voice coil, stitched XL tinsel leads, and vented motor structure make it a go-to car audio solution for SPL competitors and high-output daily drivers. A cast aluminum frame ensures strength under pressure, while a large Faraday ring minimizes distortion during heavy bass drops. Whether you're upgrading your system or building a wall, the AA-2.75 is a high-performance car subwoofer designed to dominate. Push limits, hit harder, and feel every beat—this is next-level bass. 1000W RMS DVC Premium Subwoofer 1000W RMS - Conservatively Rated Available in 15" and 18" Dual 2 or 4 ohm voice coils Aluminum 2.75” Voice Coil Spring-loaded terminals Vented magnetic gap High-velocity vented frame spacer ring Large aluminum Faraday ring for smooth acoustic response Patented high-strength cast aluminum frame High-temperature voice coil wire Spring-loaded terminals Stitched-on double “XL” tinsel lead wires The AA-2.75 is the first offering of our new and improved lineup and is a high-performance subwoofer, engineered for superior audio precision and durability, designed to meet the demands of professional and enthusiast-level builds. Featuring a robust design and advanced materials, it guarantees exceptional thermal and acoustic performance. 1000W RMS Power Rating: Conservatively rated to deliver sustained high output with minimal thermal compression. Dual 2 or 4 Ohm Voice Coils: Impedance options enable optimized integration with various amplifier setups for maximum efficiency and output. 2.75” Aluminum Voice Coil: Large-diameter coil wound on a lightweight, high-temperature aluminum former ensures excellent thermal dissipation and linear performance under heavy load. Spring-Loaded Terminals: High-tension spring contacts ensure reliable connections and streamline installation processes. Vented Magnetic Gap: Incorporates a precision-machined gap with cooling vents to prevent power compression and maintain consistent magnetic flux density. Advanced Structural and Acoustic Features High-Velocity Vented Frame Spacer Ring: Facilitates enhanced airflow around the voice coil for superior cooling, reducing thermal fatigue. Aluminum Faraday Ring: A large, low-inductance ring minimizes electromagnetic distortion, achieving a flatter impedance curve and smoother frequency response. Patented Cast Aluminum Frame: High-strength, non-resonant structure optimizes rigidity while minimizing weight for reduced mechanical losses. High-Temperature Voice Coil Wire: Coated with advanced heat-resistant materials, the voice coil withstands prolonged high-power operation without degradation. Double "XL" Tinsel Lead Wires: Stitched directly into the spider, these oversized leads enhance current handling capacity and resist fatigue under high excursion conditions. With meticulous attention to thermal management and mechanical stability, this subwoofer is designed to be an everyday performance monster. Its innovative construction ensures long-term reliability and precise acoustic output, making it ideal for professional-grade installations and high-performance audio systems. Specifications T/S SPECS AA-2.75 15″ D2 AA-2.75 15″ D4 AA-2.75 18″ D2 AA-2.75 18″ D4 RE (Ohms) 3.89 5.83 3.97 6.06 FS (Hz) 36.8387 37.416 29.051 31.868 VAS (L) 51.9387 45.3391 114.234 106.964 Qes 0.5847 0.6963 0.424 0.458 Qms 5.1005 5.7094 3.052 2.853 Qts 0.5245 0.6206 0.372 0.395 Le (mH) 3.6326 4.7903 3.6326 4.7903 BL (NA) 24.4656 29.1578 32.523 38.159 Mms (Grams) 388.9706 431.9464 619.174 549.519 Cms (uM/N) 47.986 41.8886 48.474 45.389 Sens (dB @ 1w/1m) 88.22 87.08 90.1 90.7 Xmax 19mm 19mm 19mm 19mm