SoundSkins Sound Quality Speaker Kit, Foam Speaker Rings and Deadening

The SoundSkins Sound Quality Speaker Kit is the fastest way to make your door speakers sound better, whether they are factory or aftermarket. It has everything needed for two speaker locations: foam speaker rings to seal the speaker to the door panel, foam backing sheets to absorb the sound bouncing around inside the door, SoundSkins Pro deadening sheets to stop the metal around the speaker from vibrating, and foam gasket tape to stop buzzes. The result is tighter mid-bass, clearer vocals and less distortion, and you can install it in the time it takes to swap a speaker. What's in the Kit Item Qty Size Thickness Material Foam Speaker Rings 2 27" x 0.79" strip 1" (25 mm) Closed-cell foam, peel and stick Foam Backing Sheets 2 4.7" x 6.7" 0.31" (8 mm) Closed-cell foam, peel and stick Speaker Kit Sheets 2 12" x 10" SoundSkins Pro 3-layer butyl, foil and foam Gasket Strip Tape 1 3' x 3/8" 0.12" (3 mm) Closed-cell foam, peel and stick Treats: 2 speaker locations. SKU: SSK-SQSK. Works with: Factory and aftermarket door speakers, including 6.5" and 6x9. What Each Part Does Foam speaker ring: Fits around the speaker and seals it against the back of the door panel. Sound goes out through the grille toward you instead of leaking into the door, so you hear more mid-bass and fewer cancellations. Foam backing sheet: Goes on the outer door skin, directly behind the speaker. It absorbs the rear sound wave so it doesn't bounce back through the cone and muddy the sound. Speaker Kit Sheet (SoundSkins Pro): Goes on the metal around the speaker opening. The butyl adds mass so the door skin stops ringing, and the foam layer blocks rattles. Gasket strip tape: Seals the speaker to its mounting surface and stops plastic brackets and trim from buzzing. Why Speakers Sound Better With It A car door is a poor speaker cabinet. It is thin metal, full of holes, with a plastic panel that rattles. A speaker mounted in it loses much of its