XS Power PWR-S7

16-Volt Lithium Racing Battery Built to Deliver Peak Cranking Power Cranking Amps: 1,500 Dual Inputs Accepts up to 300 Amps of Charging Current Recharges in as Little as 5 Minutes M6 Terminal Hardware Included 10 lbs. XS Power Titan8 lithium batteries are designed for unbeatable cranking power. This Lithium Titanate Oxide (LTO) Series uses a high-power lithium cell that is designed for high-burst output (up to 100 times its capacity). This translates to a single 10Ah module that can support burst current up to 1,000 amps and can accept 300 amps of continuous charge current. The built-in 2/0 bussing allows up to four positive and four negative direct connections to each module, without the need for any externally exposed bussing, all while leaving two easily accessible top terminals and four series or parallel expansion terminals available to easily build a bank of nearly any configuration from 12V, 24V, 36V, or any configuration imaginable. XS Power Titan8 lithium batteries are also offered in BCI direct fit models that are fully insulated with temperature monitoring built in and are suitable for use in the factory under- hood position. See specifications below. DESCRIPTION Lithium Titanate Battery Power Modules - Designed for Peak Power Weight Lbs . – 10lbs Weight Kgs. – 4.5kgs Length – 9.24 in Height – 5 in Width – 4.85 in Voltage – 16V Wattage – 7,000 MAX Amps – 2,000 Energy Wh – 168 CA – 1,000A CA Pb Eq* – 1,500A Ah – 10 Ah Pb Eq* – 30 M6 Terminal Hardware Included *CA Pb Eq is the equivalent cranking amp output when compared to AGM *Ah Pb Eq is the equivalent amp-hour when compared directly to AGM 1 Year Warranty DOWNLOAD INSTRUCTIONS PROP 65 WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer or birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov