Loading...
Lange Audio Fabrication (LAF) - Custom laser cut and engraved car audio accessories including speaker terminal plates, backplates, bass knobs, fuse blocks, distribution blocks, hood props, LED signs, and more.
Now available as fully built (ADD ON OPTION) These are 1/4" thick acrylic DIY battery delete kits. You will receive the glue to assemble. Just tape it, glue it, and tighten down your favorite battery terminals. This case has two 8mm holes in the top and easy access sides so you can secure the terminals down and secure your case down to the vehicle if you so choose (diy modification to car required for mounting ). Build video found here. IT IS RECOMMENDED TO USE WASHERS ON THE INSIDE OF THE CASE WHEN SECURING TERMINALS. TERMINALS ARE ADD ON OPTION TWO SIZES (fit all) and multiple group sizes 6W x 7.5H x 9L 6W x 7.5H x10L
Laser cut acrylic battery shields. Please specify which manufactures bars you are using. The covers are not interchangeable. Cover your bank and have a good day! Stick with plain plastic to cover and protect. Select optional engraving to add some flare. Step up your game and be LOUD AF by adding embedded LED. These are special purpose LED that are embedded into the cover to really make the engraving POP
We can put anything you can think of on these! The color is printed on the inside of the delete. Comes assembled, and includes an ABS base plate for mounting. LEDs are included. Type in the description of what you want into the box and we will reach out to you via your order contact info to discuss and show preview image before its made. You can email us photos or pictures at that time. If you have any questions before ordering, send us a message by clicking the bar at the top of this page.
Already have a LAF battery case kit? Want to purchase the LED base separate? You can do that here. Case not included. LED bases are cheaper when purchased at the same time as the case, this can be found on the battery case page- not here. This is only for those who already have a case and want to add the base later. All bases will adapt to their respective battery case no modifications needed. Standard LED is the Chase LEDs.
Don't get me wrong, the new Cyber batteries are SIIIIICK.. but they lack a way to mount them down. LAF fixed that.... Protect your investment and make it look shiny at the same time! DIY acrylic case kit for the Cyber Battery is shipped with glue and instructions. Peel it, tape it, glue it and TURN IT TO 11!!!! Bottom plate has four holes to mount the case down, Then insert the spacer plate to keep your battery off the hardware. Insert your battery and put the protective lid on. Contact LAF by clicking the header bar at the top of this page to get a quote for customizing. 20% restocking fee on all cases
1/4" acrylic DIY kits for Lishen cell batteries. Includes glue and instructions. Comes as kit- you assemble. Holes in base for mounting to floor. *Colored acrylic is not recommended to be combined with LED base. The color will filter much of the LED affect. You're paying good money for this and we want you to be happy with the results Video instructions can be found here Dimensions: These vary slightly depending on which brand of terminal you are using 18ah (1x6)- L x H x W (jims) / 15.5W x 7.25H x 3D (PDB) 18ah (2x3)- L x H x W (jims) / 8W x 7.125H x 5.5D (PDB) 36ah- 15.3W x 7.25H x 5.4D (jims) / 15.5W x 7.25H x 5.5D (PDB) 54ah- W x 5H x D (jims) / 15.5W x 7.25H x 8D (PDB) 72ah- W x H x D (jims) / 15.5W x 7.25H x 10.5D (PDB) 90ah 108ah- W x H x D (jims) / 15.5W x 7.25H x 15.5D (PDB) 20% restocking fee on all cases.
This is a battery delete for side post connectivity for group 34/78 size batteries commonly used in Chevy applications. Yes this will fit your hoe or Silverado. SIDE POST CONNECTIVITY In house designed and locally machined connection pads will connect to your OEM wiring harness so that no modifications will be needed. This is truly plug n play. A 4g lug will be provided for you to make your own ground connection to the chassis. You can use your own 1/0 gauge lug and wire if you so choose. Just lug your wire and connect internally to the ground pad. STYLES These come fully assembled. No kit option available. Options will be 4 spot ground and power bars, 6 spot ground and power bars, or a 6 spot fuse block. There is no room to add ground distro to the 6 spot fuse, but it isn't needed either, really you are just connecting your chassis wiring harness to ground, your extra chassis grounds from your battery will be done in the back of the vehicle to the frame. Add LED wrapped around the inside of the delete to get it to glowwwwwww.
Made to order. Lead time 1-2 weeks. If you need it sooner reach out before ordering. LAF's Ultimate Battery Delete!! We have spent a couple years now looking at how to design the ultimate battery delete. The result speaks for itself! Its sure to meet your needs! Battery Delete + Fuse Block + Distro + SAE adapter! All in one! Don't want to cut your OEM SAE terminal off? No problem! Our SAE post will thread right onto the delete for you to connect to. Pos and Neg are on different sides than what's in the picture? No problem! just spin the SAE post off and move to the other side of the bar and rotate the delete! Need to get that 4th run from the alt? No problem! The SAE post is threaded through so you can lug a wire to the top (or run accessories) Comes completely assembled but available as a kit if you want to save a couple bucks (the kit means the delete needs to be glued up but the top fuse block plate will come assembled still). Kit will come with glue and youtube link to assembly videos. Dimensions are to the top of the fuse lid once assembled 4 spot: 9" long x 6"wide x 8" tall 6 spot: 10" long x 7.5" wide x 8" tall
Case Kit does not include bars, but can be added here. Haltec balancers now screw onto top of case lid. QNBBM screw to back side of case. There is no balancer mounting solution for 1x6 or 2x3 cases. Assembly required. 1/4" acrylic DIY kits for Yinlong cell batteries. Includes glue and instructions. Comes as kit- you assemble. Holes in base for mounting to floor. *Colored acrylic is not recommended to be combined with LED base. The color will filter much of the LED affect. You're paying good money for this and we want you to be happy with the results *Please tape your case up and check size before gluing. Returns will not be accepted once case is glued Video instructions can be found here Dimensions: These vary slightly depending on which brand of terminal you are using (1x6 or 2x3) - 30/45ah- 16.3L x 8.5H x 3.2W (2x6) - 70/80ah- 16.3L x 8.5H x 5.8W (3x6) - 105/120ah- 16.3L x 8.5H x 8.4W (4x6) - 140/160ah- 16.3L x 8.5H x 11W *Returns/Exchanges not accepted unless there is an error on our part. *Returns no longer accepted on Ill Customz STANDARD cases as bars are discontinued