Lithium Pros Batteries

M3167-36 36V 67Ah Lithium Ion Trolling Battery Replace three group 31 AGM batteries with this ONE battery! 36V 67Ah (2,570 Whr) 160 Reserve Minutes BCI Group 31 size, (13″L x 6.81″ W x 8.43″ T) 39.8 lbs This is the 36V 67Ah Lithium Ion Trolling Battery we recommend for freshwater and saltwater tournament anglers using 36V trolling motors. At 39.8 lbs, it is hard to believe that ONE battery can do what three group 31 marine batteries* can. Internal Heating Fishing in the cold? No problem! The M3167-36 has an internal heating system with heating pads on each cell . This system works automatically to warm the cells for proper charging in freezing conditions. This expands the temperature range of operation to -4⁰F~140⁰F . Bluetooth Download the LP Battery View app and enjoy a simple interface that displays State of Charge, Time Remaining, voltage, amperage, temperatures, and more. Have control of your Lithium Pros batteries right in the palm of your hand. In a flats boats and other shallow water fishing boats where weight is a premium, this is a fast and efficient way to take 191 lbs* out of the boat. A lighter boat is faster and more fuel efficient and can get into more places. Catch fish where your competitors can’t. This battery features 160 reserve minutes, or enough power for extended trolling in one area from daylight to dark.** In addition to that capacity, a on-board DC charger (from Lithium Pros, sold separately) can automatically recharge this trolling battery from the outboard engine’s charging system. Got another DC charge system like the CHARGE™ from PowerPole? Great! Running a new brushless trolling motor too? You'll never find the bottom of this battery! Imagine being able to troll all day long with only one battery! The M3167-36 battery is the same physical size as a typical group 31 battery, so it fits in most marine battery trays. (13″L x 6.81″ W x 8.43″ T) Installation is a snap and you are ready to go with a Lithium Pros battery that is “strong all day long.” NOTE: A 38.4V LiFePO4 compatible battery charger is required. *Group 31 marine battery assumed to be 190RC and 77 lbs. **Assumes 50% setting on a Minn Kota motor and 50% duty cycle (usage) on the motor. Higher settings or a higher duty cycle (more usage, such as in wind or water current) will reduce this time.

L2267 12V 67Ah Lithium Ion Bluetooth Battery New* Bluetooth w/ Mobile App Great for trolling motors up to 36V Great for 12V marine electronics Perfect for kayaks! 12V 67Ah (850 Whr) 160 Reserve Minutes BCI Group 22NF size, 8.98"x5.43"x8.19" 19.4 lbs The L2267 is an upgrade for BCI group 22NF lead acid batteries. It is intended for use with 12V trolling motors and 12V marine electronics. Featuring 160 reserve minutes of energy, it is equivalent to a standard Group 22NF battery. (8.98" L x 5.43" W x 8.19" T) The L Series The L Series of batteries is made for trolling motor and other deep cycle marine applications that can benefit from fast recharge, superior charge efficiency, weight reduction, and cycle lives beyond 3,000 cycles. Built with Lithium Iron Phosphate cells tested to the UL1642 standard, the L series of batteries is recommended for inductive motor loads such as trolling motors, electric motors, motive power, and other forms of energy storage. The L Series of 12V lithium ion batteries feature an internal battery management system designed to auto balance the cells and protect for over temperature, over voltage, under voltage, over current and short circuit conditions. They can be charged with typical AGM battery chargers (see restrictions and notes) and are IP67 water resistant. Charging is simple because your existing 12V AGM battery compatible charger will work fine.* Recharge times vary based on the size of the charger, outboard run time, and charging system but most anglers tell us they are “green light” on the charger before they go sleep! That’s peace of mind. The L Series also features Bluetooth connectivity. Download the LP Battery View App from Lithium Pros in the App store. This App shows you Time Remaining, State of Charge, voltage, amperage, and temperature for each of your L Series batteries. NOTE: Not intended for engine start or charging from an alternator. *Insure the charger's float voltage is 13.6V or less and the output voltage never exceeds 14.6V. Do not "de-sulfate" any lithium ion battery. See instructions for more details.

Lithium Pros L24105 12V 105 Ah Bluetooth Lithium Ion Battery New* Bluetooth w/ Mobile App Great for trolling motors up to 36V Great for 12V marine electronics 12V 105Ah (1,344 W/hr) 250 Reserve Minutes BCI Group 24 size (10.25" L x 6.61" W x 8.24" T) 24.2 lbs The L24105 is an upgrade for BCI Group 24 lead acid batteries. It is intended for use with 12V trolling motors and 12V marine electronics. Featuring 250 reserve minutes of energy, its an easy way to replace three Group 29 marine batteries and save space and weight. They are the same size as a typical Group 24 case. (10.25" L x 6.61" W x 8.24" T) The L Series The L Series of batteries is made for trolling motor and other deep cycle marine applications that can benefit from fast recharge, superior charge efficiency, weight reduction, and cycle lives beyond 3,000 cycles. Built with Lithium Iron Phosphate cells tested to the UL1642 standard, the L series of batteries is recommended for inductive motor loads such as trolling motors, electric motors, motive power, and other forms of energy storage. The L Series of 12V lithium ion batteries feature an internal battery management system designed to auto balance the cells and protect for over temperature, over voltage, under voltage, over current and short circuit conditions. They can be charged with typical AGM battery chargers (see restrictions and notes) and are IP67 water resistant. Charging is simple because your existing 12V AGM battery compatible charger will work fine.* Recharge times vary based on the size of the charger, outboard run time, and charging system but most anglers tell us they are “green light” on the charger before they go sleep! That’s peace of mind. The L Series also features Bluetooth connectivity. Download the LP Battery View App from Lithium Pros in the App store. This App shows you Time Remaining, State of Charge, voltage, amperage, and temperature for each of your L Series batteries. NOTE: Not intended for engine start or charging from an alternator. *Insure the charger's float voltage is 13.6V or less and the output voltage never exceeds 14.6V. Do not "de-sulfate" any lithium ion battery. See instructions for more details.

Lithium Pros L24150 12V 150Ah Bluetooth Lithium Ion Battery New* Bluetooth w/ Mobile App Great for trolling motors up to 36V Great for 12V marine electronics 12V 150Ah 357 Reserve Minutes BCI Group 24 size (10.25" L x 6.61" W x 8.24" T) 31 lbs The L24150 is an upgrade for BCI Group 24 lead acid batteries. It is intended for use with trolling motors and 12V marine electronics. Featuring 357 reserve minutes of energy, its an easy way to replace three Group 31 marine batteries and save space and weight while doubling your usable energy. They are the same size as a typical Group 24 case. (10.25" L x 6.61" W x 8.24" T) The L Series The L Series of batteries is made for trolling motor and other deep cycle marine applications that can benefit from fast recharge, superior charge efficiency, weight reduction, and cycle lives beyond 3,000 cycles. Built with Lithium Iron Phosphate cells tested to the UL1642 standard, the L series of batteries is recommended for inductive motor loads such as trolling motors, electric motors, motive power, and other forms of energy storage. The L Series of 12V lithium ion batteries feature an internal battery management system designed to auto balance the cells and protect for over temperature, over voltage, under voltage, over current and short circuit conditions. They can be charged with typical AGM battery chargers (see restrictions and notes) and are IP67 water resistant. Charging is simple because your existing 12V AGM battery compatible charger will work fine.* Recharge times vary based on the size of the charger, outboard run time, and charging system but most anglers tell us they are “green light” on the charger before they go sleep! That’s peace of mind. The L Series also features Bluetooth connectivity. Download the LP Battery View App from Lithium Pros in the App store. This App shows you Time Remaining, State of Charge, voltage, amperage, and temperature for each of your L Series batteries. NOTE: Not intended for engine start or charging from an alternator. *Insure the charger's float voltage is 13.6V or less and the output voltage never exceeds 14.6V. Do not "de-sulfate" any lithium ion battery. See instructions for more details.

Lithium Pros L2467-24 24V 67Ah BlueTooth Lithium Ion Trolling Battery New* BlueTooth w/ Mobile App Replace two 12V batteries with this ONE battery! ABYC E-13 compliant 24V 67Ah (2,450 Whr) 155 Reserve Minutes BCI Group 24 size (10.25" L x 6.61" W x 8.24" T) 31.0 lbs L2467-24 24V 67Ah Lithium Ion Battery replaces two BCI group 31 lead acid batteries for marine trolling motors. That's right! Take two lead acid batteries out and put this ONE battery back in to fish the same time! Featuring 155 reserve minutes of usable energy all tucked in a standard Group 24 case. (10.25" L x 6.61" W x 8.24" T) What will you do with all that extra space? The L Series The L Series of batteries is made for trolling motor and other deep cycle marine applications that can benefit from fast recharge, superior charge efficiency, weight reduction, and cycle lives beyond 3,000 cycles. Built with Lithium Iron Phosphate cells tested to the UL1642 standard, the L series of batteries is recommended for inductive motor loads such as trolling motors, electric motors, motive power, and other forms of energy storage. The L Series of 24V lithium ion batteries feature an internal battery management system designed to auto balance the cells and protect for over temperature, over voltage, under voltage, over current and short circuit conditions. They can be charged with typical AGM battery chargers (see restrictions and notes) and are IP67 water resistant. Charging is simple because your existing 24V AGM battery compatible charger will work fine.* Recharge times vary based on the size of the charger, outboard run time, and charging system but most anglers tell us they are “green light” on the charger before they go sleep! That’s peace of mind. The L Series also features Bluetooth connectivity. Download the LP Battery View App from Lithium Pros in the App store. This App shows you Time Remaining, State of Charge, voltage, amperage, and temperature for each of your L Series batteries. NOTE: Not intended for engine start or charging from an alternator. *25.6V LiFePO4 battery chargers are required. Typical two bank marine chargers will not work.

Lithium Pros L3167-36 36V 67Ah BlueTooth Lithium Ion Trolling Battery New* BlueTooth w/ Mobile App Replace three 12V batteries with this ONE battery! 36V 67Ah (2,570 Whr) 160 Reserve Minutes BCI Group 31 size (13" L x 6.81" W x 8.43" T) 42.9 lbs TM3165-36 36V 65Ah Lithium Ion Battery replaces three BCI group 31 lead acid batteries for marine trolling motors. That's right! Take three lead acid batteries out and put this ONE battery back in to fish the same time! Featuring 155 reserve minutes of usable energy all tucked in a standard Group 31 case. (13" L x 6.81" W x 8.43" T) What will you do with all that extra space? The L Series The L Series of batteries is made for trolling motor and other deep cycle marine applications that can benefit from fast recharge, superior charge efficiency, weight reduction, and cycle lives beyond 3,000 cycles. Built with Lithium Iron Phosphate cells tested to the UL1642 standard, the L series of batteries is recommended for inductive motor loads such as trolling motors, electric motors, motive power, and other forms of energy storage. The L Series of 36V lithium ion batteries feature an internal battery management system designed to auto balance the cells and protect for over temperature, over voltage, under voltage, over current and short circuit conditions. They can be charged with typical AGM battery chargers (see restrictions and notes) and are IP67 water resistant. Charging is simple because your existing 36V AGM battery compatible charger will work fine.* Recharge times vary based on the size of the charger, outboard run time, and charging system but most anglers tell us they are “green light” on the charger before they go sleep! That’s peace of mind. The L Series also features Bluetooth connectivity. Download the LP Battery View App from Lithium Pros in the App store. This App shows you Time Remaining, State of Charge, voltage, amperage, and temperature for each of your L Series batteries. NOTE: Not intended for engine start or charging from an alternator. *38.4V LiFePO4 compatible charger is required. You can select our 7 Amp Charger (Part # 1006) or our 16 Amp Charger (Part# 1016A) from the menu above or as an option later on!

M3110-S 12.8V 110Ah Lithium Ion Engine start Battery This battery meets the Sept 19, 2022 Mercury specifications for a lithium-ion engine start battery. Compatible with all outboards and alternators 40% more energy than a typical Group 31 AGM battery! 12.8V 110Ah (1,410 Whr) 260 Reserve Minutes BCI Group 31 size, (13″L x 6.81″ W x 8.43″ T) 31.0 lbs M3110-S 12V 110Ah Marine Starting Battery – The M3110-S is a Lithium Ion battery for the angler who will accept no compromises in a starting battery. This is the most cranking power that we can fit in a standard Group 31 case. (13″ L x 6.81″ W x 8.43″ T) Storing energy in a Lithium Ion battery is one thing. Starting an engine and charging from an alternator is quite another. Engine start is our forté and we start some of the fastest vehicles on Earth. How? It features one of the most advanced internal battery management systems in the marine industry today. This fully integrated digital battery management system insures long life and trouble free service all safely sealed inside a lightweight box. This battery features 1,500 Marine Crank Amps (Eq) and will have no trouble starting most conventional outboard engines on the market today. It can safely be used with any outboard charging system including Honda, Suzuki, all Mercury and all Yamaha. This 12V 110Ah Marine Starting Battery has a whopping 260 minutes of reserve capacity. This is the battery of choice for boats with multiple 12″ graphs with pro anglers using this battery with up to three graphs running simultaneously. Having trouble with graphs resetting during an engine crank? The high power Lithium Iron Phosphate (LiFePO4) chemistry used in this battery holds a higher voltage as it is discharged eliminating this “reset” issue. Avoid going to two 12V lead acid batteries when moving to 12″ graphs by choosing Lithium Pros! Charging is simple because your existing 12V AGM battery compatible charger will work fine.* Recharge times vary based on the size of the charger, outboard run time, and charging system but most anglers tell us they are “green light” on the charger before they go sleep! That’s peace of mind. In spite of all the power contained in this battery, it still ultra lightweight at an amazing 31 pounds! NOTE: Not for use in series to make higher voltage packs. 12V systems ONLY. *Insure the charger’s float voltage is 13.5V or less and the charger never exceeds 14.8V. Do not “de-sulfate” any lithium ion battery.

M31150-S 12.8V 150Ah Lithium Ion Engine start Battery This battery meets the Sept 19, 2022 Mercury specifications for a lithium-ion engine start battery. Compatible with all outboards and alternators Replace two group 31 AGM batteries with this ONE battery! 12.8V 150Ah (1,920 Whr) 360 Reserve Minutes BCI Group 31 size, (13″L x 6.81″ W x 8.43″ T) 36.0 lbs This is the 12.8V 150Ah Lithium Ion Engine Start Battery we recommend for freshwater and saltwater tournament anglers for use with all outboards. At 36 lbs, it is hard to believe that ONE battery can do what two group 31 marine batteries* can. The M31150-S is a Lithium Ion Battery for the angler who will accept no compromises in a starting battery. This is the most capacity that we can fit in a standard Group 31 case. (13″ L x 6.81″ W x 8.43″ T) It features one of the most advanced internal battery management systems in the marine industry today. This fully integrated digital battery management system insures long life and trouble free service all safely sealed inside a lightweight box. This battery features 1,500 Marine Crank Amps (Eq) and will have no trouble starting all conventional outboard engines on the market today. It can safely be used with any outboard charging system that is AGM and Gel battery compatible including Mercury, Yamaha, Honda, and Suzuki. This battery meets the Sept 19, 2022 Mercury specifications for a lithium-ion engine start battery. The M31150-S Marine Starting Battery has a whopping 360 minutes of reserve capacity, the highest on the market in a Group 31 case. This is the battery of choice for boats with multiple 12″ graphs with pro anglers using this battery with up to five graphs running simultaneously. Having trouble with graphs resetting during an engine crank? The high power Lithium Iron Phosphate (LiFePO4) chemistry used in this battery holds a higher voltage as it is discharged eliminating this “reset” issue. Avoid going to two 12V lead acid batteries when moving to 12″+ for graphs and forward facing sonar by choosing Lithium Pros! Charging is simple because your existing 12V AGM battery compatible charger will work fine.* In spite of all the power contained in this battery, it still ultra lightweight at an amazing 36 pounds! That's 1/4 of the weight of two Group 31 AGM batteries. NOTE: Not for use in series to make higher voltage packs. 12V systems ONLY. Orders placed today are estimated to ship on April 5th, 2023. *Group 31 marine battery assumed to be 220RC and 76 lbs. *Insure the charger’s float voltage is 13.5V or less and the charger never exceeds 14.8V. Do not “de-sulfate” any lithium ion battery.

LP-M3175-24A 25.6V 60Ah Lithium Ion Trolling Battery Replace two group 31 AGM batteries with this ONE battery! 25.6V 60Ah (1,536 Whr) 138 Reserve Minutes BCI Group 31 size, (13″L x 6.81″ W x 8.43″ T) 31.0 lbs This is the 25.6V 60Ah Lithium Ion Trolling Battery we recommend for freshwater and saltwater tournament anglers using 24V trolling motors. At 31.0 lbs, it is hard to believe that ONE battery can do what two group 31 marine batteries* can. In a flats boats and other shallow water fishing boats where weight is a premium, this is a fast and efficient way to take 110 lbs* out of the boat. A lighter boat is faster and more fuel efficient and can get into more places. Catch fish where your competitors can’t. This battery features 138 reserve minutes, or enough power for extended trolling in one area from daylight to dark.** In addition to that capacity, a on-board DC charger (from Lithium Pros, sold separately) can automatically recharge this trolling battery from the outboard engine’s charging system. Got another DC charge system like the CHARGE™ from PowerPole? Great! You'll never find the bottom of this battery. Imagine being able to troll all day long with only one battery! The LP-M3175-24A battery is the same physical size as a typical group 31 battery, so it fits in most marine battery trays. (13″L x 6.81″ W x 8.43″ T) Installation is a snap and you are ready to go with a Lithium Pros battery that is “strong all day long.” NOTE: A 25.6V LiFePO4 compatible battery charger is required. *Group 31 marine battery assumed to be 205RC and 70 lbs. **Assumes 50% setting on a Minn Kota motor and 50% duty cycle (usage) on the motor. Higher settings or a higher duty cycle (more usage, such as in wind or water current) will reduce this time.

M32215-S 12.8V 215Ah Lithium Ion Engine start Battery This battery meets the Sept 19, 2022 Mercury specifications for a lithium-ion engine start battery. Compatible with all outboards and alternators Replace three group 31 AGM batteries with this ONE battery! 12.8V 215Ah (2,750 Whr) 510 Reserve Minutes BCI Group GC12 size, (12.88″L x 7.13″ W x 10.50″ T) 46.4 lbs M32215-S 12V 215Ah Marine Starting Battery - The M32215-S is a Lithium Iron Phosphate Battery for the pro angler who needs ONE battery to start and power multiple graphs too. This is comparable energy to three Group 31 AGM batteries. (12.88" L x 7.13" W x 10.50" T) Storing energy in a Lithium Ion battery is one thing. Starting an engine and charging from an alternator is quite another. Engine start is our forté and we start some of the fastest vehicles on Earth. How? It features one of the most advanced internal battery management systems in the marine industry today. This fully integrated digital battery management system insures long life and trouble free service, all safely sealed inside a lightweight box. This battery features 1,400 Marine Crank Amps (Eq) and will have no trouble starting most conventional outboard engines on the market today. It can safely be used with any outboard charging system including Honda, Suzuki, all Mercury and all Yamaha. This 12V 215Ah Marine Starting Battery has a whopping 510 minutes of reserve capacity. This is the battery of choice for boats with multiple 12" or 16" graphs and/or forward facing sonar capabilities for pro anglers. Having trouble with graphs resetting during an engine crank or low voltage warnings? The high power Lithium Iron Phosphate (LiFePO4) chemistry used in this battery holds a higher voltage during discharge, eliminating this "reset" issue. Avoid going to two or three 12V lead acid batteries when moving to 16" graphs or forward facing sonar by choosing Lithium Pros! Charging is simple because your existing 12V AGM battery compatible charger will work fine.* In spite of all the power contained in this battery, it still ultra lightweight at an amazing 46.4 pounds! That's 1/5 of the weight of three Group 31 AGM batteries. NOTE: Not for use in series to make higher voltage packs. 12V systems ONLY. *Insure the charger’s float voltage is 13.5V or less and the charger never exceeds 14.8V. Do not “de-sulfate” any lithium ion battery.

M3275-36 38.4V 75Ah Lithium Ion Trolling Battery Replace three group 31 AGM batteries with this ONE battery! 38.4V 75Ah (2,850 Whr) 173 Reserve Minutes BCI Group GC12 size, 12.88"L x 7.13" W x 10.500" 42 lbs Replace THREE Group 31 marine AGM batteries with ONE M3275-36 Lithium ion trolling battery. This is a perfect fit for most bass boats and other shallow water fishing boats where weight is a premium. Its a fast and easy way to take 186 lbs* out of the boat and have more storage space. Yes, you read that correctly. Its 1/5 of the total weight! Its the same as leaving your co-angler on the dock (or the marshal, your choice.) A lighter boat is faster and more fuel efficient and can get into more places. Catch fish where your competitors can't. This battery features 173 reserve minutes, or enough power for extended trolling in one area from daylight to dark.** In addition to that capacity, a on-board DC charger (from Lithium Pros, sold separately) can automatically recharge this trolling battery from the outboard engine’s charging system. Got another DC charge system like the CHARGE™ from PowerPole? Great! You'll never find the bottom of this battery. Imagine being able to troll all day long with only one battery! This battery is the same foot print as a typical group 31 battery except its 2" taller, so it fits in most marine battery trays. (12.875"L x 7.125" W x 10.500" T) Installation is a snap and you are ready to go with a Lithium Pros battery that is “strong all day long.” At only 42 lbs, it is hard to believe that ONE battery can do what three group 31 marine batteries* but anglers have been winning with Lithium Pros for years and you can too. *Group 31 marine battery assumed to be 220RC and 76 lbs. **Assumes 50% setting on a Minn Kota motor and 50% duty cycle (usage) on the motor. Higher settings or a higher duty cycle (more usage, such as in wind or water current) will reduce this time.

N3110-S 12.8V 110Ah Lithium Ion Starting Battery This battery meets the Sept 19, 2022 Mercury specifications for a lithium-ion engine start battery. Compatible with all outboards and alternators NMEA 2000 connectivity 12.8V 110Ah (1,410 Whr) 260 Reserve Minutes BCI Group 31 size, (13″L x 6.81″ W x 8.43″ T) 32 lbs N3110-S 12V 110Ah Marine Starting Battery – The N3110-S is a our most advanced Marine engine start battery. The N3110-S combines all the features of the M3110-S and adds the embedded BM-21 battery monitor. The result is a 32 lb Lithium Pros 12V 110Ah Marine Starting Battery that is an amazing upgrade to any 12V group 31 AGM battery. It is also the world's first series of lithium-ion batteries to directly connect to the NMEA 2000 network. BM-21 Embedded Battery Monitor The BM-21 Embedded battery monitor is NMEA 2000 certified and features a micro port on the battery. It is directly addressable on the NMEA 2000 network and it is “plug and play” with all NMEA 2000 multi-function displays. The BM-21 reports all required PGNs as well as the three standard battery related PGNs: 127506 , 127508 , 127513 , as well as alert PGN 126983 . Simply select the individual battery from the NMEA 2000 device list and configure it.** This puts the individual battery voltage, current, time remaining, state of charge, and temperature all on the network. In addition, the BM-21 also records warnings and alerts events with a real time/date stamp. Also, cumulative lifetime amp-hours are recorded. This information is available on the optional OLED display. (N series batteries with a "D" part number suffix include this display. The N3110-SD includes the OLED display.) Engine Start for all outboards Storing energy in a Lithium Ion battery is one thing. Starting an engine and charging from an alternator is quite another. Engine start is our forté and we start some of the fastest vehicles on Earth. How? It features one of the most advanced internal battery management systems in the marine industry today. This fully integrated digital battery management system insures long life and trouble free service all safely sealed inside a lightweight box. This battery features 1,500 Marine Crank Amps (Eq) and will have no trouble starting most conventional outboard engines on the market today. It can safely be used with any outboard charging system including Honda, Suzuki, all Mercury and all Yamaha. This 12V 110Ah Marine Starting Battery has a whopping 260 minutes of reserve capacity, the highest on the market in a Group 31 case. (13″ L x 6.81″ W x 9.30″ T) This is the battery of choice for boats with multiple 12″ graphs with pro anglers using this battery with up to five graphs running simultaneously. Having trouble with graphs resetting during an engine crank? The high power Lithium Iron Phosphate (LiFePO4) chemistry used in this battery holds a higher voltage as it is discharged eliminating this “reset” issue. Avoid going to two 12V lead acid batteries when moving to 12″ graphs by choosing Lithium Pros! Charging is simple because your existing 12V AGM battery compatible charger will work fine.* Recharge times vary based on the size of the charger, outboard run time, and charging system but most anglers tell us they are “green light” on the charger before they go sleep! That’s peace of mind. In spite of all the power contained in this battery, it still ultra lightweight at an amazing 32 pounds! NOTE: Not for use in series to make higher voltage packs. 12V systems ONLY. ** Check the MFD's documentation to insure it recognizes at least PGNs 127506 and 127508 for minimum compatibility. *Insure the charger’s float voltage is 13.5V or less and the charger never exceeds 14.6V. Do not “de-sulfate” any lithium ion battery.

The S2460 is the world's first sodium-ion battery made for outboards! Advanced Sodium-ion technology Made for 12V engine start Compatible with all 12V alternators and stator charging systems Works in the cold 800 MCA Eq* Wide voltage range: 6~15.6V** Works down to -4'F 108 Reserve Minutes BCI Group 24 size (10.25" L x 6.61" W x 8.24" T) IP67 watertight 17 lbs The S2460 is an upgrade for BCI Group 24 lead acid batteries. It is intended for use with 12V outboards and 12V marine electronics. At only 17 lbs, its an easy way to save weight with engine start batteries vs AGM. They are the same size as a typical BCI Group 24 case. (10.25" L x 6.61" W x 8.24" T) The S series The Sodium-ion ("S") series of Lithium Pros batteries leverage advanced, high power sodium-ion technology to bring you a safe, lightweight option vs traditional lead acid batteries. Sodium-ion batteries are a very safe, cost effective, and emerging alternative to lithium-ion including LiFePO4. The Lithium Pros sodium-ion cells are optimized for high power making them perfect for engine start. Of course, starting the engine is one thing. Safely charging an advanced battery back from various charging systems, either alternators or stator type, is another thing. This is where the S series really shines. The S series of batteries can accept rapid charge rates at a wide voltage range. Benefit from superior charge efficiency, weight reduction, and cycle lives beyond 1,500 cycles with the S series. Built with active cell balancing, the S series of batteries are recommended for use with all 12V marine alternators and stator charging systems. They can be charged with typical 12V lead acid battery chargers and are IP67 water tight. *MCA Eq means that it will behave similar to a lead-acid battery of the same BCI MCA rating. It involves delivering the rated current for 8 seconds at 32'F. **Do not "de-sulfate" any sodium-ion battery. See instructions for more details.

TM133 12V 33Ah Lithium Ion Battery Perfect for kayaks! Excellent for Lights and Electronics 12V 33Ah (422 Whr) 65 Reserve Minutes BCI Group U1 size, 7.75"x5.12x6.37" 10 lbs The TM133 is an upgrade for BCI group U1 lead acid batteries. It is intended for use with 12V trolling motors and 12V marine electronics. Featuring 65 reserve minutes of energy, it is 30% more runtime than a typical U1 marine lead acid battery. At only 10 lbs and (7.75" L x 5.12" W x 6.37" T), its the perfect size for kayaks! The TM series The Trolling Motor ("TM") series of batteries is made for trolling motor and other deep cycle marine applications that can benefit from fast recharge, superior charge efficiency, weight reduction, and cycle lives beyond 2,000 cycles. Built with Lithium Iron Phosphate cells tested to the UL1642 standard, the TM series of batteries is recommended for inductive motor loads such as trolling motors, electric motors, motive power, and other forms of energy storage. The TM series of 12.8V lithium ion batteries feature an internal battery management system designed to auto balance the cells and protect for over temperature, over voltage, under voltage, over current and short circuit conditions. They can be charged with typical AGM battery chargers (see restrictions and notes) and are IP65 water resistant. Charging is simple because your existing 12V AGM battery compatible charger will work.* *Insure the charger's float voltage is 13.6V or less and the output voltage never exceeds 14.6V. Do not "de-sulfate" any lithium ion battery. See instructions for more details.

TM2265 12V 65Ah LFP Battery Perfect for kayaks! 12V 65Ah (850 Whr) 156 Reserve Minutes BCI Group 22NF size, 8.98"x5.43"x8.19" 19.4 lbs The TM2265 is an upgrade for BCI group 22NF lead acid batteries. It is intended for use with 12V trolling motors and 12V marine electronics. Featuring 160 reserve minutes of energy, it is equivalent to a standard Group 22NF battery. (8.98" L x 5.43" W x 8.19" T) The TM series The Trolling Motor ("TM") series of batteries is made for trolling motor and other deep cycle marine applications that can benefit from fast recharge, superior charge efficiency, weight reduction, and cycle lives beyond 3,000 cycles. Built with Lithium Iron Phosphate cells tested to the UL1642 standard, the TM series of batteries is recommended for inductive motor loads such as trolling motors, electric motors, motive power, and other forms of energy storage. The TM series of 12V lithium ion batteries feature an internal battery management system designed to auto balance the cells and protect for over temperature, over voltage, under voltage, over current and short circuit conditions. They can be charged with typical AGM battery chargers (see restrictions and notes) and are IP67 water resistant. Charging is simple because your existing 12V AGM battery compatible charger will work.* NOTE: Not intended for engine start or charging from an alternator. *Insure the charger's float voltage is 13.6V or less and the output voltage never exceeds 14.6V. Do not "de-sulfate" any lithium ion battery. See instructions for more details.

BLUETOOTH - TM24100 12V 100 Ah Lithium Ion Battery New* BlueTooth w/ Mobile App Great for trolling motors up to 36V Great for 12V marine electronics 12V 100Ah 252 Reserve Minutes BCI Group 24 size (10.25" L x 6.61" W x 8.24" T) 24.2 lbs The TM24105 is an upgrade for BCI Group 24 lead acid batteries. It is intended for use with 12V trolling motors and 12V marine electronics. Featuring 252 reserve minutes of energy, its an easy way to replace three Group 29 marine batteries and save space and weight. They are the same size as a typical Group 24 case. (10.25" L x 6.61" W x 8.24" T) The TM series The Trolling Motor ("TM") series of batteries is made for trolling motor and other deep cycle marine applications that can benefit from fast recharge, superior charge efficiency, weight reduction, and cycle lives beyond 3,000 cycles. Built with Lithium Iron Phosphate cells tested to the UL1642 standard, the TM series of batteries is recommended for inductive motor loads such as trolling motors, electric motors, motive power, and other forms of energy storage. The TM series of 12.8V lithium ion batteries feature an internal battery management system designed to auto balance the cells and protect for over temperature, over voltage, under voltage, over current and short circuit conditions. They can be charged with typical AGM battery chargers (see restrictions and notes) and are IP65 water resistant. The TM series also features Bluetooth connectivity. Download the LP Battery View App from Lithium Pros in the App store. This App shows you Time Remaining, State of Charge, voltage, amperage, and temperature for each of your TM series batteries. Charging is simple because your existing 12V AGM battery compatible charger will work.* NOTE: Not intended for engine start or charging from an alternator. *Insure the charger's float voltage is 13.6V or less and the output voltage never exceeds 14.6V. Do not "de-sulfate" any lithium ion battery. See instructions for more details.

TM24150 12V 150 Ah Lithium Ion Battery Great for trolling motors up to 36V Great for 12V marine electronics 12V 150Ah 360 Reserve Minutes Bluetooth mobile App BCI Group 24 size (10.25" L x 6.61" W x 8.24" T) 31 lbs The TM24150 is an upgrade for BCI Group 24 lead acid batteries. It is intended for use with 12V trolling motors and 12V marine electronics. Featuring 360 reserve minutes of energy, its an easy way to replace three Group 29 marine batteries and save space and weight while doubling your usable energy. They are the same size as a typical Group 24 case. (10.25" L x 6.61" W x 8.24" T) Bluetooth Download the LP Battery View app and enjoy a simple interface that displays State of Charge, Time Remaining, voltage, amperage, temperatures, and more. Have control of your Lithium Pros batteries right in the palm of your hand. Charging Lithium Pros IntelliChargers are recommended, made specifically for Lithium Iron Phosphate batteries. However these can be charged with typical AGM battery chargers* (see restrictions and notes) and are IP67 watertight. The TM series The Trolling Motor ("TM") series of batteries is made for trolling motor, electronics, and other deep cycle marine applications that can benefit from fast recharge, superior charge efficiency, weight reduction, and cycle lives beyond 3,000 cycles. Built with Lithium Iron Phosphate cells tested to the UL1642 standard, the TM series of batteries is recommended for inductive motor loads such as trolling motors, electric motors, motive power, and other forms of energy storage. The TM series of 12V lithium ion batteries feature an internal battery management system designed to auto balance the cells and protect for over temperature, over voltage, under voltage, over current and short circuit conditions. NOTE: The TM series is not intended for engine start. *Insure the absorption voltage is less than 14.6V and the float voltage is 13.6V or less. Do not "de-sulfate" any lithium ion battery.

LP-N3175-24D 25.6V 60Ah Lithium Ion Trolling Battery Replace two group 31 AGM batteries with this ONE battery! NMEA 2000 connectivity 25.6V 75Ah (1,920 Whr) 145 Reserve Minutes BCI Group 31 size, (13″L x 6.81″ W x 8.43″ T) 27.5 lbs The LP-N3175-24D is an advanced lithium ion battery made for 24V marine trolling application and includes the embedded BM-21 battery monitor. The result is a 32 lb Lithium Pros 25.6V 75Ah Lithium Ion Trolling Battery that is an amazing upgrade to any 24V trolling battery bank. It is also the world's first series of lithium-ion batteries to be NMEA 2000 Certified. When you demand in the ultimate in equipment for your boat with the highest level of communication, the N series with NMEA 2000 connectivity is for you. The LP-N3175-24D is perfect for demanding freshwater and saltwater tournament anglers using 24V trolling motors. At 32.2 lbs, it is hard to believe that ONE battery can do what two group 31 marine batteries* can. In a flats boats and other shallow water fishing boats where weight is a premium, this is a fast and efficient way to take 108 lbs* out of the boat. A lighter boat is faster and more fuel efficient and can get into more places. Catch fish where your competitors can’t. BM-21 Embedded Battery Monitor The BM-21 Embedded battery monitor is NMEA 2000 certified and features a micro port on the battery. It is directly addressable on the NMEA 2000 network and it is “plug and play” with all NMEA 2000 multi-function displays. The BM-21 reports all required PGNs as well as the three standard battery related PGNs: 127506 , 127508 , 127513 , as well as alert PGN 126983 . Simply select the individual battery from the NMEA 2000 device list and configure it.** This puts the individual battery voltage, current, time remaining, state of charge, and temperature all on the network. In addition, the BM-21 also records warnings and alerts events with a real time/date stamp. Also, cumulative lifetime amp-hours are recorded. This information is available on the optional OLED display. (N series batteries with a "D" part number suffix include this display. The LP-N3175-24D includes the OLED display.) "The ONE Battery you need" This battery features 152 reserve minutes, or enough power for extended trolling in one area from daylight to dark.^ In addition to that capacity, a on-board DC charger (from Lithium Pros, sold separately) can automatically recharge this trolling battery from the outboard engine’s charging system. Got another DC charge system like the CHARGE™ from Power-Pole? Great! Running a new brushless trolling motor too? You'll never find the bottom of this battery! Imagine being able to troll all day long with only one battery! The LP-N3175-24D battery is the same physical size as a typical group 31 battery, so it fits in most marine battery trays. (13″L x 6.81″ W x 8.43″ T) Installation is a snap and you are ready to go with a Lithium Pros battery that is “strong all day long.” NOTE: A 25.6V LiFePO4 compatible battery charger is required. *Group 31 marine battery assumed to be 205RC and 70 lbs. ** Check the MFD's documentation to insure it recognizes at least PGNs 127506 and 127508 for minimum compatibility. ^Assumes 50% setting on a Minn Kota motor and 50% duty cycle (usage) on the motor. Higher settings or a higher duty cycle (more usage, such as in wind or water current) will reduce this time.

N32105-24D 25.6V 105Ah Lithium Ion Trolling Battery Replace two AGM batteries with this ONE battery and have 50% more energy! NMEA 2000 connectivity 25.6V 105Ah (2,688 Whr) 250 Reserve Minutes BCI Group GC12 size, (12.88″L x 7.13″ W x 10.50″ T) 46.0 lbs The N32105-24 is an advanced lithium ion battery made for 24V marine trolling application and includes the embedded BM-21 battery monitor. The result is a 46 lb Lithium Pros 25.6V 105Ah Lithium Ion Trolling Battery that is an amazing upgrade to any 24V trolling battery bank. It is also the world's first series of lithium-ion batteries to be NMEA 2000 Certified. When you demand in the ultimate in equipment for your boat with the highest level of communication, the N series with NMEA 2000 connectivity is for you. The N32105-24 is perfect for demanding freshwater and saltwater tournament anglers using 24V trolling motors. At 46 lbs, it is hard to believe that ONE battery can do what three group 31 marine batteries* can. In a flats boats and other shallow water fishing boats where weight is a premium, this is a fast and efficient way to take 170 lbs* out of the boat. A lighter boat is faster and more fuel efficient and can get into more places. Catch fish where your competitors can’t. BM-21 Embedded Battery Monitor The BM-21 Embedded battery monitor is NMEA 2000 certified and features a micro port on the battery. It is directly addressable on the NMEA 2000 network and it is “plug and play” with all NMEA 2000 multi-function displays. The BM-21 reports all required PGNs as well as the three standard battery related PGNs: 127506 , 127508 , 127513 , as well as alert PGN 126983 . Simply select the individual battery from the NMEA 2000 device list and configure it.** This puts the individual battery voltage, current, time remaining, state of charge, and temperature all on the network. In addition, the BM-21 also records warnings and alerts events with a real time/date stamp. Also, cumulative lifetime amp-hours are recorded. This information is available on the optional OLED display. (N series batteries with a "D" part number suffix include this display. The N32105-24D includes the OLED display.) "The ONE Battery you need" This battery features 250 reserve minutes, or enough power for extended trolling in one area from daylight to dark.^ In addition to that capacity, a on-board DC charger (from Lithium Pros, sold separately) can automatically recharge this trolling battery from the outboard engine’s charging system. Got another DC charge system like the CHARGE™ from Power-Pole? Great! Running a new brushless trolling motor too? You'll never find the bottom of this battery! Imagine being able to troll all day long with only one battery! The N32105-24 battery is the same physical footprint as a typical group 31 battery, so it fits in most marine battery trays. ( 12.88 ″L x 7.13 ″ W x 10.50 ″ T) Installation is a snap and you are ready to go with a Lithium Pros battery that is “strong all day long.” NOTE: A 25.6V LiFePO4 compatible battery charger is required. *Group 31 marine battery assumed to be 205RC and 70 lbs. ** Check the MFD's documentation to insure it recognizes at least PGNs 127506 and 127508 for minimum compatibility. ^Assumes 50% setting on a Minn Kota motor and 50% duty cycle (usage) on the motor. Higher settings or a higher duty cycle (more usage, such as in wind or water current) will reduce this time.

N32215-S 12.8V 215Ah Lithium Ion Starting Battery This battery meets the Sept 19, 2022 Mercury specifications for a lithium-ion engine start battery. Compatible with all outboards and alternators NMEA 2000 connectivity 12.8V 215Ah (2,752 Whr) 510 Reserve Minutes BCI Group GC12 size, 12.88"L x 7.13" W x 10.500" 46.6 lbs N32215-SD 12.8V 215Ah Marine Starting Battery – The N3 2215-SD is a our most advanced Marine engine start battery. The N3 2215-SD combines all the features of the M 3 2215-S and adds the embedded BM-21 battery monitor. The result is a 46.6 lb Lithium Pros 12.8V 215Ah Marine Starting Battery that effectively replaces THREE 12V group 31 AGM batteries. It is also the world's first series of lithium-ion batteries to be NMEA 2000 certified. BM-21 Embedded Battery Monitor The BM-21 Embedded battery monitor is NMEA 2000 certified and features a micro port on the battery. It is directly addressable on the NMEA 2000 network and it is “plug and play” with all NMEA 2000 multi-function displays. The BM-21 reports all required PGNs as well as the three standard battery related PGNs: 127506 , 127508 , 127513 , as well as alert PGN 126983 . Simply select the individual battery from the NMEA 2000 device list and configure it.** This puts the individual battery voltage, current, time remaining, state of charge, and temperature all on the network. In addition, the BM-21 also records warnings and alerts events with a real time/date stamp. Also, cumulative lifetime amp-hours are recorded. This information is available on the optional OLED display. (N series batteries with a "D" part number suffix include this display. The N3 2215-SD includes the OLED display.) Engine Start for all outboards Storing energy in a Lithium Ion battery is one thing. Starting an engine and charging from an alternator is quite another. Engine start is our forté and we start some of the fastest vehicles on Earth. How? It features one of the most advanced internal battery management systems in the marine industry today. This fully integrated digital battery management system insures long life and trouble free service all safely sealed inside a lightweight box. This battery features 1,400 Marine Crank Amps (Eq) and will have no trouble starting most conventional outboard engines on the market today. It can safely be used with any outboard charging system including Honda, Suzuki, all Mercury and all Yamaha. This 12.8V 215Ah Marine Starting Battery has a whopping 510 minutes of reserve capacity, the highest on the market in a Group 31 footprint. (GC12 case, 12.88"L x 7.13" W x 10.500") This is the battery of choice for boats with multiple 12″ graphs with pro anglers using this battery with up to five graphs running simultaneously and 3D imaging. Having trouble with graphs resetting during an engine crank? The high power Lithium Iron Phosphate (LiFePO4) chemistry used in this battery holds a higher voltage as it is discharged eliminating this “reset” issue. Choose Lithium Pros and avoid going to two or more 12V lead acid batteries when moving to 12″ graphs and 3D imaging. Charging is simple because your existing 12V AGM battery compatible charger will work fine.* Recharge times vary based on the size of the charger, outboard run time, and charging system but most anglers tell us they are “green light” on the charger before they go sleep! That’s peace of mind. In spite of all the power contained in this battery, it still ultra lightweight at an amazing 46.6 pounds! (That's 1/5 of the weight of the batteries it replaces.) NOTE: Not for use in series to make higher voltage packs. 12V systems ONLY. ** Check the MFD's documentation to insure it recognizes at least PGNs 127506 and 127508 for minimum compatibility. *Insure the charger’s float voltage is 13.6V or less and the charger never exceeds 14.8V. Do not “de-sulfate” any lithium ion battery.

N3275-36 38.4V 75Ah Lithium Ion Trolling Battery Replace three group 31 AGM batteries with this ONE battery! NMEA 2000 connectivity 38.4V 75Ah (2,850 Whr) 173 Reserve Minutes BCI Group GC12 size, (12.88″L x 7.13″ W x 10.50″ T) 43.0 lbs The N3275-36 is an advanced lithium ion battery made for 36V marine trolling application and includes the embedded BM-21 battery monitor. The result is a 43 lb Lithium Pros 38.4V 75Ah Lithium Ion Trolling Battery that is an amazing upgrade to any 36V trolling battery bank. It is also the world's first series of lithium-ion batteries to directly connect to the NMEA 2000 network. When you demand in the ultimate in equipment for your boat with the highest level of communication, the N series with NMEA 2000 connectivity is for you. The N3275-36 is perfect for demanding freshwater and saltwater tournament anglers using 36V trolling motors. At 43 lbs, it is hard to believe that ONE battery can do what three group 31 marine batteries* can. In a flats boats and other shallow water fishing boats where weight is a premium, this is a fast and efficient way to take 170 lbs* out of the boat. A lighter boat is faster and more fuel efficient and can get into more places. Catch fish where your competitors can’t. BM-21 Embedded Battery Monitor The BM-21 Embedded battery monitor is NMEA 2000 certified and features a micro port on the battery. It is directly addressable on the NMEA 2000 network and it is “plug and play” with all NMEA 2000 multi-function displays. The BM-21 reports all required PGNs as well as the three standard battery related PGNs: 127506 , 127508 , 127513 , as well as alert PGN 126983 . Simply select the individual battery from the NMEA 2000 device list and configure it.** This puts the individual battery voltage, current, time remaining, state of charge, and temperature all on the network. In addition, the BM-21 also records warnings and alerts events with a real time/date stamp. Also, cumulative lifetime amp-hours are recorded. This information is available on the optional OLED display. (N series batteries with a "D" part number suffix include this display. The N3275-36D includes the OLED display.) "The ONE Battery you need" This battery features 173 reserve minutes, or enough power for extended trolling in one area from daylight to dark.^ In addition to that capacity, a on-board DC charger (from Lithium Pros, sold separately) can automatically recharge this trolling battery from the outboard engine’s charging system. Got another DC charge system like the CHARGE™ from PowerPole? Great! Running a new brushless trolling motor too? You'll never find the bottom of this battery! Imagine being able to troll all day long with only one battery! The N3275-36 battery is the same physical footprint as a typical group 31 battery, so it fits in most marine battery trays. ( 12.88 ″L x 7.13 ″ W x 10.50 ″ T) Installation is a snap and you are ready to go with a Lithium Pros battery that is “strong all day long.” NOTE: A 38.4V LiFePO4 compatible battery charger is required. *Group 31 marine battery assumed to be 205RC and 70 lbs. ** Check the MFD's documentation to insure it recognizes at least PGNs 127506 and 127508 for minimum compatibility. ^Assumes 50% setting on a Minn Kota motor and 50% duty cycle (usage) on the motor. Higher settings or a higher duty cycle (more usage, such as in wind or water current) will reduce this time.

P1625 16 V 25 Ah Lithium Ion Battery The trusted 16V battery powering drag racing for years 16.0V 22Ah (350 Whr) 750 CA BCI Group 34 size (10.25" L x 6.61" W x 7.24" T) 12.2 lbs P1625 16V 22Ah Lithium Ion Racing Battery Battery with Charge Protection is the go-to choice for Top Dragster, Top Sportsman, Pro Mod, and many other drag racing classes. It is made for engine starting and the P1625 is our highest power 16V battery for total-loss systems with no alternator. It is also a great choice for many types of circle track racing, such as dirt/asphalt, Late Models and Modifieds. It has plenty of reserve to last for a full drag racing pass with multiple stages of nitrous, or for a full circle track race of 100 laps or more, depending on loads. Made into a Group 34 case, this product is a drop-in replacement for popular 16V offerings from Turbo-Start®, XS Power®, and others. (10.24" L x 6.93" W x 7.2" T) Weighing only 12.2 lbs, the P1625 16V 22Ah Lithium Ion Racing Battery Battery is super light weight. But don't let the weight fool you. This battery cranks an engine like nothing else. The high power Lithium Iron Phosphate cells used in the P1625 16V 22Ah Lithium Ion Racing Battery Battery are optimized for the highest power output. That means lightning fast engine starts every time. You'll need two of the "other guy's" batteries to do what one of these will. Thanks to the Lithium Iron Phosphate technology, the voltage will be higher near the end of the pass (or race), giving you a performance advantage and more consistent voltage all the way to the finish line. The P series batteries feature a charge protection board. The third terminal on the battery is intended for the charger’s ground connection and allows for balanced and safe recharging of the battery. Please note, the P series batteries do not include a low voltage disconnect. It is very important that the battery voltage never drop below 12.0V. Over discharge damage is excluded from warranty coverage. Further, P series batteries are not to be used with alternators and they are not to be connected in series (for higher voltage) or parallel (for higher capacity.) The optional kit includes a P1625 Lithium Ion Racing Battery and a 1015A Intellicharger. The 1015A Racing Battery charger is a 18.25V 25A charger with an LCD display. This Battery charger is fully automatic and displays voltage, amperage, and amp-hours charged. *Note: All 16V lithium-ion batteries require a specialty battery charger. Do not use 16V battery chargers designed for 16V lead acid batteries.

Internal heating system Bluetooth 150Ah 360 reserve minutes Group 24 size Only 31 lbs! RE24150 12.8V 150Ah Lithium Ion Battery is a drop in replacement for BCI group 24 lead acid batteries for off-grid energy storage in RV and home micro-grid. Featuring 360 reserve minutes of energy (1,920Whr), it is more energy than any AGM or LFP battery on the market in a standard Group 24 case. (10.25" L x 6.61" W x 8.24" T) It can be discharged at up to 100A continuously and charged at 50A continuous. (Note: not intended for engine start.) In spite of all the power contained in this battery, it still ultra lightweight at an amazing 31 pounds! Renewable Energy RE series is made for applications that can benefit from fast recharge, superior charge efficiency, weight reduction, and cycle lives beyond 3,000 cycles. The RE series is built with Lithium Iron Phosphate cells tested to the UL1642 standard. It is recommended for solar energy storage, RV energy storage, and other forms of off-grid energy storage. They feature an internal battery management system designed to auto balance the cells and protect for over temperature, over voltage, under voltage, over current and short circuit conditions. Internal Heating The RE series features internal heating pads on each cell. When cell temperatures drop below 32⁰F, this system automatically warms the cells for safe charging. This expands the temperature range of operation to -4⁰F~140⁰F . Bluetooth Download the LP Battery View app and enjoy a simple interface that displays State of Charge, Time Remaining, voltage, amperage, temperatures, and more. Have control of your Lithium Pros batteries right in the palm of your hand. Charging They can be charged with typical AGM battery chargers* (see restrictions and notes) and are IP55 dust resistant. (Note: Not intended for wet location use. *Insure the absorption voltage is less than 14.6V and the float voltage is 13.6V or less. Do not "de-sulfate" any lithium ion battery.