SoundQubed Amplifiers

Product Overview Soundqubed NEW 2024 F-Series Full Bridge Amplifiers Introducing the Soundqubed F-Series Amplifiers, the epitome of power and innovation in the world of full bridge amplifiers. These cutting-edge amplifiers are equipped with the latest technology, ensuring unparalleled performance while delivering the mind-blowing output you crave. Despite their compact size, the Soundqubed F-Series Amplifiers boast an enlarged heat sink, allowing for superior heat transfer and ensuring optimal performance even during the most demanding audio sessions. But that's not all – these amplifiers also offer the convenience of an optional temperature and voltage readout on the bass knob, giving you complete control over your audio experience. With power ranging from an impressive 250 Watts x 4 channels @ 4 ohms. All the way up to a massive 750 Watts x 4 channels @ 4ohms, the Soundqubed F-Series Amplifiers are ready to take your sound system to new heights. Not only are these amplifiers capable of delivering mind-blowing power, but they are also designed to handle a full range of frequencies, making them incredibly versatile. We understand that price is an important factor for our customers, and that's why we made it our mission to maintain affordability without compromising on quality. By focusing on customer satisfaction, we were able to create a compact and reliable amplifier that doesn't break the bank. Rest assured, the Soundqubed F-Series Amplifiers have undergone rigorous testing and development for over a year to ensure they can withstand even the most extreme conditions. We've gone above and beyond to outdo any potential harm caused by end users, making these amplifiers truly built to last. Experience the passion and dedication that went into creating the Soundqubed F-Series Amplifiers – the ultimate choice for audio enthusiasts who demand nothing but the best. Although the F4-1600 is the beginning of this series, it still has great power with options such as 10x crossover frequency multiplier. With total measurments being, 9.13" L x 8.46" W x 2.28" T. This amplifier packs a punch in a small platform. Frequency capability range goes from 10Hz to 20kHz. RMS power @ 4 ohms = 4 x 250Watts RMS power @ 2 ohms = 4 x 400Watts RMS power @ 4 ohms Bridged 2 x 800 watts. More details coming in the near future! Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty Reviews (No reviews yet) Write a Review

Product Overview Soundqubed NEW 2024 F-Series Full Bridge Amplifiers Introducing the Soundqubed F-Series Amplifiers, the epitome of power and innovation in the world of full bridge amplifiers. These cutting-edge amplifiers are equipped with the latest technology, ensuring unparalleled performance while delivering the mind-blowing output you crave. Despite their compact size, the Soundqubed F-Series Amplifiers boast an enlarged heat sink, allowing for superior heat transfer and ensuring optimal performance even during the most demanding audio sessions. But that's not all – these amplifiers also offer the convenience of an optional temperature and voltage readout on the bass knob, giving you complete control over your audio experience. With power ranging from an impressive 3000 watts all the way up to a staggering 12,000 watts, the Soundqubed F-Series Amplifiers are ready to take your sound system to new heights. Not only are these amplifiers capable of delivering mind-blowing power, but they are also designed to handle a full range of frequencies, making them incredibly versatile. We understand that price is an important factor for our customers, and that's why we made it our mission to maintain affordability without compromising on quality. By focusing on customer satisfaction, we were able to create a compact and reliable amplifier that doesn't break the bank. Rest assured, the Soundqubed F-Series Amplifiers have undergone rigorous testing and development for over a year to ensure they can withstand even the most extreme conditions. We've gone above and beyond to outdo any potential harm caused by end users, making these amplifiers truly built to last. Experience the passion and dedication that went into creating the Soundqubed F-Series Amplifiers – the ultimate choice for audio enthusiasts who demand nothing but the best. Although the F1-3000 is the beginning of the monoblock side of the F-series, it has great power output with tons of versatility. With total measurments being, 9.25" L x 8.46" W x 2.28" T. This amplifier packs a punch in a small platform. Frequency capability range goes from 10Hz to 20kHz. RMS power @ 4 ohms = 850 Watts RMS power @ 2 ohms = 1700 Watts RMS power @ 1 ohm = 3000 watts. More details coming in the near future! Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty Reviews (No reviews yet) Write a Review

Product Overview Soundqubed NEW 2024 F-Series Full Bridge Amplifiers Introducing the Soundqubed F-Series Amplifiers, the epitome of power and innovation in the world of full bridge amplifiers. These cutting-edge amplifiers are equipped with the latest technology, ensuring unparalleled performance while delivering the mind-blowing output you crave. Despite their compact size, the Soundqubed F-Series Amplifiers boast an enlarged heat sink, allowing for superior heat transfer and ensuring optimal performance even during the most demanding audio sessions. But that's not all – these amplifiers also offer the convenience of an optional temperature and voltage readout on the bass knob, giving you complete control over your audio experience. With power ranging from an impressive 250 Watts x 4 channels @ 4 ohms. All the way up to a massive 750 Watts x 4 channels @ 4ohms, the Soundqubed F-Series Amplifiers are ready to take your sound system to new heights. Not only are these amplifiers capable of delivering mind-blowing power, but they are also designed to handle a full range of frequencies, making them incredibly versatile. We understand that price is an important factor for our customers, and that's why we made it our mission to maintain affordability without compromising on quality. By focusing on customer satisfaction, we were able to create a compact and reliable amplifier that doesn't break the bank. Rest assured, the Soundqubed F-Series Amplifiers have undergone rigorous testing and development for over a year to ensure they can withstand even the most extreme conditions. We've gone above and beyond to outdo any potential harm caused by end users, making these amplifiers truly built to last. Experience the passion and dedication that went into creating the Soundqubed F-Series Amplifiers – the ultimate choice for audio enthusiasts who demand nothing but the best. The F4-4400 is the next 4 channel of this series, and this amplifier BRINGS THE POWER! With total measurments being, 11.81" L x 8.46" W x 2.28" T. This amplifier also packs a punch in a small platform. Frequency capability range goes from 10Hz to 20kHz. RMS power @ 4 ohms = 4 x 750Watts RMS power @ 2 ohms = 4 x 1100Watts RMS power @ 4 ohms Bridged 2 x 2200Watts. More details coming in the near future! Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty Reviews (No reviews yet) Write a Review

Product Overview Soundqubed NEW 2024 F-Series Full Bridge Amplifiers Introducing the Soundqubed F-Series Amplifiers, the epitome of power and innovation in the world of full bridge amplifiers. These cutting-edge amplifiers are equipped with the latest technology, ensuring unparalleled performance while delivering the mind-blowing output you crave. Despite their compact size, the Soundqubed F-Series Amplifiers boast an enlarged heat sink, allowing for superior heat transfer and ensuring optimal performance even during the most demanding audio sessions. But that's not all – these amplifiers also offer the convenience of an optional temperature and voltage readout on the bass knob, giving you complete control over your audio experience. With power ranging from an impressive 3000 watts all the way up to a staggering 12,000 watts, the Soundqubed F-Series Amplifiers are ready to take your sound system to new heights. Not only are these amplifiers capable of delivering mind-blowing power, but they are also designed to handle a full range of frequencies, making them incredibly versatile. We understand that price is an important factor for our customers, and that's why we made it our mission to maintain affordability without compromising on quality. By focusing on customer satisfaction, we were able to create a compact and reliable amplifier that doesn't break the bank. Rest assured, the Soundqubed F-Series Amplifiers have undergone rigorous testing and development for over a year to ensure they can withstand even the most extreme conditions. We've gone above and beyond to outdo any potential harm caused by end users, making these amplifiers truly built to last. Experience the passion and dedication that went into creating the Soundqubed F-Series Amplifiers – the ultimate choice for audio enthusiasts who demand nothing but the best. The F1-5000 is the next amplifier of the monoblock side of the F-series. Much like the 3000, the 5000 has tons of versatility and power capbablity packing 5000 total watt at 1 ohm. With total measurments being, 10.78" L x 8.46" W x 2.28" T. This amplifier packs a punch in a small platform. Frequency capability range goes from 10Hz to 20kHz. RMS power @ 4 ohms = 1900 Watts RMS power @ 2 ohms = 3600 Watts RMS power @ 1 ohm = 5000 watts. More details coming in the near future! Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty Reviews (1 review) Write a Review 1 Review Hide Reviews Show Reviews 4 impactful bass Posted by Que Brown on 06/25/2025 easy tunability & very impactful Bass

Product Overview Soundqubed NEW 2024 F-Series Full Bridge Amplifiers Introducing the Soundqubed F-Series Amplifiers, the epitome of power and innovation in the world of full bridge amplifiers. These cutting-edge amplifiers are equipped with the latest technology, ensuring unparalleled performance while delivering the mind-blowing output you crave. Despite their compact size, the Soundqubed F-Series Amplifiers boast an enlarged heat sink, allowing for superior heat transfer and ensuring optimal performance even during the most demanding audio sessions. But that's not all – these amplifiers also offer the convenience of an optional temperature and voltage readout on the bass knob, giving you complete control over your audio experience. With power ranging from an impressive 3000 watts all the way up to a staggering 12,000 watts, the Soundqubed F-Series Amplifiers are ready to take your sound system to new heights. Not only are these amplifiers capable of delivering mind-blowing power, but they are also designed to handle a full range of frequencies, making them incredibly versatile. We understand that price is an important factor for our customers, and that's why we made it our mission to maintain affordability without compromising on quality. By focusing on customer satisfaction, we were able to create a compact and reliable amplifier that doesn't break the bank. Rest assured, the Soundqubed F-Series Amplifiers have undergone rigorous testing and development for over a year to ensure they can withstand even the most extreme conditions. We've gone above and beyond to outdo any potential harm caused by end users, making these amplifiers truly built to last. Experience the passion and dedication that went into creating the Soundqubed F-Series Amplifiers – the ultimate choice for audio enthusiasts who demand nothing but the best. The F1-7500 starts to get to the upper end of the power supply of the F-series. The F1-7500 is not for those with stock alternators and no additional power supply banks. This amplifier is power hungry because it delivers 7500 Watts at 1 Ohm!! With total measurments being, 13.46" L x 8.46" W x 2.28" T. This amplifier packs a punch in a very reasonable platform. RMS power @ 4 ohms = 2300 Watts RMS power @ 2 ohms = 4500 Watts RMS power @ 1 ohm = 7500 watts. More details coming in the near future! Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty Reviews (No reviews yet) Write a Review

Product Overview Soundqubed NEW 2024 BG-Series Bagger/Micro Amplifiers When the brains sat down to look at direction of the markets they are interested in, they saw a focus needed in the Motorcycle/Bagger/Micro amplifier market. 12 months of testing later, and we have created our BG series amplifiers. These amplifiers were developed with the neccesity of space, as its main priority. The BG series comes in a very small case as low as 8.3" long by 3.8" wide and only 1.7" tall. The biggest amp in size for this series, is the BG4-1400 that measures 9.92"L x 3.8" W x 1.7" Tall. We developed a total of 3 amplifiers (for now) for this series; BG4-700, BG4-1400, and BG1-750. We are certain our BG series will change the direction of many enthusiats in the bagger industry. As well as those in the side by side, boats, golf carts, sports cars; you name it, we have an amplifer that can fit it, and increase the sound output. Much like all our amplifiers, we wante to maintain the sleek, professional look of a black case with machined logos. We also included lasered end caps that include an aray of our logo and of course, input and output indentification. Now onto the specifics of the BG1-750. This amplifier has an Ultra-Compact design that measures 9.84" long by 3.8" wide and 1.7" tall. Within this casing, we achieved an ouput level of 750w x 1 channel at 1 ohm. The versatility of this amplifier, is the one you will need when space limits your options. RMS Power @ 4 Ohms = 425 Watts RMS Power @ 2 Ohms = 600 Watts RMS Power @ 1 Ohm = 750 Watts Frequency Repsonse of 10Hz - 20kHz Signal to noise ratio of 92dB Efficiency at 4 ohms is 85% Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED EXTENDING BEYOND THOSE SET FORTH ABOVE Reviews (No reviews yet) Write a Review

Product Overview Soundqubed NEW 2024 BG-Series Bagger/Micro Amplifiers When the brains sat down to look at direction of the markets they are interested in, they saw a focus needed in the Motorcycle/Bagger/Micro amplifier market. 12 months of testing later, and we have created our BG series amplifiers. These amplifiers were developed with the neccesity of space, as its main priority. The BG series comes in a very small case as low as 8.3" long by 3.8" wide and only 1.7" tall. The biggest amp in size for this series, is the BG4-1400 that measures 9.92"L x 3.8" W x 1.7" Tall. We developed a total of 3 amplifiers (for now) for this series; BG4-700, BG4-1400, and BG1-750. We are certain our BG series will change the direction of many enthusiats in the bagger industry. As well as those in the side by side, boats, golf carts, sports cars; you name it, we have an amplifer that can fit it, and increase the sound output. Much like all our amplifiers, we wante to maintain the sleek, professional look of a black case with machined logos. We also included lasered end caps that include an aray of our logo and of course, input and output indentification. Here are the specifics of the BG4-1400. As previously mentioned above, this amplifier measures a small yet stout casing size of 9.92" long by 3.8" wide and 1.7" tall. Within this casing, we were able to achieve the ability to produce all four channels providing 200 watts RMS of output at 4 ohms. You can find the remaining features below. Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED EXTENDING BEYOND THOSE SET FORTH ABOVE Reviews (2 reviews) Write a Review 2 Reviews Hide Reviews Show Reviews 5 BG1400.4 Posted by Chris on 01/20/2026 Install on a 25 Harley RG. Amp fits in the top OEM rack perfectly as if it was made specifically for it. Could fit 2 of these units if needed with a little work. 5 BGS-1400 Posted by Lawrence M. on 01/05/2026 Great power from a small size. Big power in the bridged load at 600+w x 2ch

Product Overview Soundqubed NEW 2024 BG-Series Bagger/Micro Amplifiers When the brains sat down to look at direction of the markets they are interested in, they saw a focus needed in the Motorcycle/Bagger/Micro amplifier market. 12 months of testing later, and we have created our BG series amplifiers. These amplifiers were developed with the neccesity of space, as its main priority. The BG series comes in a very small case as low as 8.3" long by 3.8" wide and only 1.7" tall. The biggest amp in size for this series, is the BG4-1400 that measures 9.92"L x 3.8" W x 1.7" Tall. We developed a total of 3 amplifiers (for now) for this series; BG4-700, BG4-1400, and BG1-750. We are certain our BG series will change the direction of many enthusiats in the bagger industry. As well as those in the side by side, boats, golf carts, sports cars; you name it, we have an amplifer that can fit it, and increase the sound output. Much like all our amplifiers, we wante to maintain the sleek, professional look of a black case with machined logos. We also included lasered end caps that include an aray of our logo and of course, input and output indentification. Now onto the specifics of the BG4-700. As previously mentioned above, this amplifier measures a small yet stout casing size of 8.3" long by 3.8" wide and 1.7" tall. Within this casing, we were able to achieve the ability to produce all four channels providing 100 watts RMS of output at 4 ohms. You can find the remaining features below. Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED EXTENDING BEYOND THOSE SET FORTH ABOVE Reviews (1 review) Write a Review 1 Review Hide Reviews Show Reviews 5 Freakin awesome Posted by Justin on 10/03/2025 This is now my house brand!! I like the quality and price point. The customer service is top notch!! Shout out to Mike Hall !! This amp packs a punch for its size. Will be using regularly on my installs.

Product Overview Feel the earth shake and windows rattle with the Soundqubed Q Series Q1-10000 10,000 watt amplifier! This powerhouse packs a punch in a compact 25.5" casing with the following features: Massive 10,000+ watt output 3 power and ground inputs Silk screen logo etched end caps Factory 1/4" plexi backing Master/slave connectivity to link 2 amps Beefy 16v capability pushing out 15,000+ watts Premium Tiffany RCA inputs 1 Ohm Stable Variable Low pass Filter The Soundqubed Q1-10000 combines extreme power and smart design. Experience room-shaking bass with every turn of the knob. This amplifier brings serious power and style in one clean, black and machined casing. Built for audio enthusiasts and professionals, the Q1-10000 takes your sound system to the next level. The smart and compact design will let you optimize power and space in any setup. This amplifier does require several eletrical upgrades in your setup to insure it has the appropiate power to produce its rated power. High output alternator, additional reserve bank and big three are a MUST! Please consult a Soundqubed employee or install professional before installing this amplifier, to make sure you have all neccesary equipment to run this amplifier the right way! Recomended for install: - AT LEAST 350 amps of alternator charging capability. - Upgraded Battery under the hood - 1000ah of AGM batteries or 140ah of lithium - Dash mounted voltage meter (ot advised to use factory voltage meter) - Multiple runs of 0 gauge power and ground wire from front to back to handle the increaseed alternator output Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Reviews (No reviews yet) Write a Review

Product Overview The amplifier that will change the game in the 5,000 watt market! With a brand new board that is made to support up to 18v, this amplifier's power capability (with output potential) almost feels endless. SoundQubed’s goals are Reliability, Affordability, with Quality and Longevity at the forefront of our expectations. Through testing, we knew we wanted something that could be pushed to the limits each and everyday, and handle it with ease. Not only did we achieve this, but we have exceeded our own expectations. The Q1-4500 V2 is the right amplifier for you, if you are looking for something in a compact design (for 4500w anyways). It's Korean built (so you know it's stout). With our expectations, you CANNOT go wrong with the Q1-4500 V2! https://youtu.be/4BH_7dv29Dw Model Q1-4500 Class Class D Channels 1 Channel Working Voltage 9V - 18V Maximum Amperage 800 amp Power @ 4 Ohm 14.4V 1950 Watts RMS Power @ 2 Ohm 14.4V 2950 Watts RMS Power @ 1 Ohm 14.4V 4670 Watts RMS Power @ 1 Ohm 16V 5640 Watts RMS Power @ 1 Ohm 18V 7140 Watts RMS Frequency Response 13 Hz - 204 Hz S/N Ratio Greater than 94 Damping Factor Greater than 310 Input Sensitivity 5 V - 0.15 V Subsonic Filter 10 Hz - 50 Hz Low-Pass Filter 20 Hz - 200 Hz Bass Boost 0 - 6 DB Dimensions in (LxWxH) 15.35 x 9.5 x 2.5 Dimensions MM (LxWxH) 390 x 241 x 65 Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty Reviews (No reviews yet) Write a Review

Product Overview Serious Bass for Serious Systems You asked for more power. Here it is in a 6000W monoblock! If you need dominating bass, uncompromising power, and the ability to crush it in the lanes, this is the car audio amplifier for you. The Q1-6000 isn’t for everyone. It’s for competitors with extreme builds who are trying to get the most out of their car stereo system and daily drivers who need enough bass to announce their arrival from a half mile away. Competition Ready 6000W Monoblock Amp The Korean Half-Bridge board in this 6000W monoblock is the same quality you’ve come to expect from the Q-Series Amplifiers. The amp features robust workhorse components built to take abuse and keep on truckin’. Need to push more than one subwoofer? Run a 6K to each subwoofer or strap two together for a colossal 12,000 watt load at 2 Ohm. Q-Series Monoblock Improvements The 6K is the result of optimization at every level. We’ve reduced the form factor from the Q1-4500.1, added 20% more power, and included an integrated fan so you can demo all day and stay cool. This half-bridge mono amplifier handles up to 16 Volts, has a very small footprint, and provides IMMENSE power. Required: Upgraded Electrical Charging System You will need to have The Big Three wiring upgrade, at least one 250 Amp high-output alternator, and at least one secondary battery with 500 Ah of AGM or 80 Ah of Lithium to run this 6000W monoblock. Single Channel 6000 Watts (RMS) @ 1 Ohm 1-Ohm stable (2) 1/0 AWG inputs Charging system upgrades are necessary Channels 1 Test Voltage 14.4V Cont Wattage @ 4ohm 2,100 @ 1% THD Cont Wattage @ 2ohm 3,600 @ 1% THD Cont Wattage @ 1ohm 6,000 @ 1% THD S/N Ration >100dB Input Voltage Sensitivity 0.2v-8v Power Wire Gauge - In (2) 1/0 Ga Speaker Wire Gauge - Out 8 Diminesions (in) 19.25L x 9.5"W x 2.675"T Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty Reviews (1 review) Write a Review 1 Review Hide Reviews Show Reviews 5 Q1-6000 Posted by Gavin mcclure on 04/11/2025 Amp is simply a beast ?

Product Overview Serious Bass for Serious Systems You asked for more power. Here it is in a 8000W monoblock! If you need dominating bass, uncompromising power, and the ability to crush it in the lanes, this is the car audio amplifier for you. The Q1-8000 is a BEAST!. It’s for competitors with extreme builds who are trying to get the most out of their car stereo system and daily drivers who need enough bass to announce their arrival from a half mile away. Competition Ready 8000W Monoblock Amp The Korean Half-Bridge board in this 8000W monoblock is the same quality you’ve come to expect from the Q-Series Amplifiers. The amp features robust workhorse components built to take abuse and keep on truckin’. Need to push more than one subwoofer? Run a 8K to each subwoofer or strap two together for a colossal 16,000 watt load at 2 Ohm. Required: Upgraded Electrical Charging System You will need to have The Big Three wiring upgrade, at least one 250 Amp high-output alternator, and at least one secondary battery with 500 Ah of AGM or 80 Ah of Lithium to run this 8000W monoblock. Single Channel 8000 Watts (RMS) @ 1 Ohm 1-Ohm stable (3) 1/0 AWG inputs Charging system upgrades are necessary Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty Reviews (1 review) Write a Review 1 Review Hide Reviews Show Reviews 5 Bass Posted by Thirst on 06/10/2025 These amplifiers are very efficient and put out hella power

Product Overview The SoundQubed Q4-150 is the most versatile amplifier in the lineup. You can use it to power the whole car stereo system, mids, highs and a subwoofer from one amplifier! Featuring a four-channel class A/B output, the Q4-150 offers superb sound quality and enough power to drive arrays of speakers. Its variable high and low pass filters can be used in a bandpass configuration so you’re able to tune and define your sound. If you’re driving subwoofers with this multiple channel amplifier, take advantage of the bass boost for a low end so thick you can eat it for dinner. The included remote gain control knob comes complete with a clipping indicator so you can keep an eye on your levels while your ears have fun absorbing the sounds. The Q4-150 is stable at 2 Ohm in stereo and 4 Ohm in mono mode. Its bridge channels can send even more power to select speakers. Four-way protection circuits and MOSFET switching devices are there to make sure you’re able to enjoy your Q4-150 for years to come. Model Q4-150 Class Class A/B Amplifier Channels 4 Channel Working Voltage 9V - 16V Fuse Rating 120A (external) Power @ 4 Ohm 14.4V 440 x 2 (Mono) Watts RMS Power @ 2 Ohm 14.4V 220 x 4 Watts RMS Power @ 4 Ohm 14.4V 150 x 4 Watts Frequency Response 20 Hz - 30kHz S/N Ratio 105dB Damping Factor Greater than 200 Input Sensitivity .2V- 8V High Pass Filter 20Hz - 5kHZ Low-Pass Filter 50 Hz - 5kHz Bass Boost 0 - 18dB @ 45Hz Dimensions in (LxWxH) 22 x 9.5 x 2.63 Dimensions MM (LxWxH) 558.8 x 241.3 x 66.8 Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED EXTENDING BEYOND THOSE SET FORTH ABOVE Reviews (No reviews yet) Write a Review

Product Overview Introducing the NEW 2024 Q4-2000 4 Channel Amplifier! Introducing the Q4-2000, a powerhouse in high-speed class A/B like processing, with a Class D footprint. Imagine if Class A/B and Class D had a baby - this is it! With its standard plexi backing and matching oversized heat sink, the Q4-2000 boasts a sleek and stylish design that complements any audio setup. Equipped with fully bandpassable crossovers, this amplifier eliminates the requirement for a DSP, making it a convenient and hassle-free choice. The clip indicator ensures that you know when you are pushing your audio system beyond its limits, providing a reliable and efficient performance. Featuring Tiffany Style RCA's, the Q4-2000 not only delivers exceptional audio quality, but also adds a touch of elegance to your setup. The inclusion of crossover multipliers allows for precise control over the top and bottom sides of the slope, giving you the flexibility to fine-tune your setup. With the option of two or four-channel input selection, this amplifier adapts to your specific audio needs. Its impressive 10 HZ -20k HZ frequency response ensures that every detail of your music is reproduced with utmost clarity and accuracy. Utilizing surface component mount technology, the Q4-2000 guarantees a reliable and durable performance, even in the most demanding conditions. It is birdagable at 4 ohm stable, providing you with the flexibility to connect multiple speakers without compromising on sound quality. The Q4-2000 also shares its cutting-edge technology with the Q4-3200, ensuring that you get the same exceptional performance across both models. Whether you're a professional audio engineer or a passionate basshead, the Q4-2000 is the perfect choice for those who demand nothing but the best in audio amplification. This amplifier being apart of our Flagship line, made in Korea. Experience the power, precision, and versatility of the Q4-2000. Elevate your audio experience to new heights with this exceptional amplifier! Certified Amp Dyno RMS Power @ 4 Ohms = 4 x 325 Watts RMS Power @ 2 Ohms = 4 x 500 Watts Bridgable Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Reviews (No reviews yet) Write a Review

Product Overview Introducing the NEW 2024 Q4-2000 4 Channel Amplifier! Introducing the Q4-3200, a powerhouse in high-speed class A/B like processing, with a Class D footprint. Imagine if Class A/B and Class D had a baby - this is it! With its standard plexi backing and matching oversized heat sink, the Q4-3200 boasts a sleek and stylish design that complements any audio setup. Equipped with fully bandpassable crossovers, this amplifier eliminates the requirement for a DSP, making it a convenient and hassle-free choice. The clip indicator ensures that you know when you are pushing your audio system beyond its limits, providing a reliable and efficient performance. Featuring Tiffany Style RCA's, the Q4-3200 not only delivers exceptional audio quality, but also adds a touch of elegance to your setup. The inclusion of crossover multipliers allows for precise control over the top and bottom sides of the slope, giving you the flexibility to fine-tune your setup. With the option of two or four-channel input selection, this amplifier adapts to your specific audio needs. Its impressive 10 HZ -20k HZ frequency response ensures that every detail of your music is reproduced with utmost clarity and accuracy. Utilizing surface component mount technology, the Q4-3200 guarantees a reliable and durable performance, even in the most demanding conditions. It is birdagable at 4 ohm stable, providing you with the flexibility to connect multiple speakers without compromising on sound quality. The Q4-3200 also shares its cutting-edge technology with its baby brother; the Q4-2000, ensuring that you get the same exceptional performance across both models. Whether you're a professional audio engineer or a passionate basshead, the Q4-3200 is the perfect choice for those who demand nothing but the best in audio amplification. This amplifier being apart of our Flagship line, made in Korea. Experience the power, precision, and versatility of the Q4-3200. Elevate your audio experience to new heights with this exceptional amplifier! RMS Power @ 4 Ohms = 4 x 440 Watts RMS Power @ 2 Ohms = 4 x 848 Watts Bridgable Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Reviews (No reviews yet) Write a Review

Product Overview The S1-1250 is a class D mono amp boasting a phenomenal load of almost 1500 watts on 1 ohm at 16 volts. It can drive any two SoundQubed HDS2.3 Series Subwoofers , or any one HDS3.2 or HDS3.3 Series Subwoofers with headroom to spare, so you can feel the bass like it’s midnight on the dance floor. The S1-1250’s on-board low pass filter will give you precise control over which frequencies you amplify, ensuring maximum fidelity out of your subwoofer amp. The subsonic filter will elongate amp life by reducing extreme distortion-inducing low resonance. The included clipping indicator on the bass knob makes this the perfect subwoofer amplifier for your HDS2.2 build . Increasing the loudness of the music, like a double shot of something strong, elevates the intensity of the listening experience. Loud music wakes you up! It enhances emotion, provides you with motivation, and bassy, bodily sensations. Listeners feel significant, observable changes in mind-body states because loud music is a stronger stimulant than quiet music and deep bass makes us feel good. The single-channel S1-1250 has 4 gauge set screw power terminals for a clean current flow. 10 gauge speaker terminals ensure your subwoofer maintains optimum sound quality and consistent voltage. If you need more from your car stereo than this cost-effective jewel provides, the S1-1250 mono amp is strappable for even more dominating bass to drive larger builds! You’ll have a greater connection to your sound by unlocking the power of low frequencies- Feeling those vibrations in your body deepens the connection to your music. Don’t waste another morning drive without the power, resonance, and frequency boost that the S1-1250 monoblock will provide your car audio system. Save money, get more bass. Get your S1-1250 mono amplifier today! Model S1-1250 Class Class D Channels 1 channel Working Voltage 8.5V to 16 V Power @ 4 Ohm 14.4V 530 Watts RMS Power @ 2 Ohm 14.4V 860 Watts RMS Power @ 1 Ohm 14.4V 1260 Watts RMS Frequency Response 10 Hz - 200 Hz S/N Ratio Greater than 80 Damping Factor Greater than 100 Input Sensitivity 5V~0.15V Subsonic Filter 10 - 50 Hz Low-Pass Filter 20Hz - 200 Hz Dimensions in (LxWxH) 11.8 x 7.8 x 2.2 Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty Reviews (No reviews yet) Write a Review

Product Overview Following the massive footsteps of our most popular mono amp, the S1-2500.1 monoblock car amp has improved circuitry than its predecessor, the S1-2250. The advanced and new circuit board helps to keep its overall operating temperature low, produce more power, and the latest technology to help prevent internal damage. High-quality class D amp design keeps your amplifier cool, guarantees low rates of total harmonic distortion, and prevents its high output performance from damaging your car. To enjoy the full power this amplifier offers, you will need an upgraded electrical charging system. The S1-2500.1 drives an immense 3000 watt load at 1 ohm on 16 volts and 2500 watts on 14.4 volts at one ohm. This monoblock amp is ready to drive your choice of HDS2.3’s, HDS3.3’s, or HDX3.2 Subwoofers in the 1200 Watts RMS and 1500 Watts RMS Power Bands. Strappable for 5000 watts at 2 ohms, this budget King mono block amp is capable of and ready for Sound Pressure Level competitions and anything else your car stereo can throw its way. The S1-2500.1’s screw terminals accommodate up to 1/0 AWG power wire and up to 10 gauge speaker wire. Find everything you need to install this amplifier with our Zero Gauge Amp Kit. To secure a long life for your new amplifier, a remote gain control knob is included with your S1-2500.1. The LED indicator alerts you straight away to the presence of clipping signals that can quickly burn or separate your subwoofer voice coils, as well as create bubbles in your former. We include the remote gain knob to help you avoid costly and needless damage to your gear. Utilize this in tandem with the VM-1 to keep a close eye on your voltage with 60 voltage checks per second for near real-time precision readings. You’ll love your new S1-2500.1 Mono Amp- From the hard rhythmic hits of a bass drop to the subdued thump of a soft kick, you’ll be able to hear and feel all the detail, impact and precision in your sound system’s low end! Disclaimer: This amplifier will require an additional charging system to run efficiently. It will run without the additional charging system but you run the risk of damaging the amplifier and/or not getting the optimum power out of it. The additional charging system includes the Big 3 upgrade , a high output alternator, as well as adding an AGM or Lithium car audio battery. All of our amplifiers are age tested for an hour before going into stock. Single channel 2500 Watts RMS @ 1 Ohm Class D 1 Ohm stable 1/0 AWG power inputs Charging system upgrades necessary Model S1-2250 Class Class D Channels 1 Channel Working Voltage 8.5 V - 16 V Maximum Amperage 225 Amps Power @ 4 Ohm 14.4V 1000 Watts RMS Power @ 2 Ohm 14.4V 1600 Watts RMS Power @ 1 Ohm 14.4V 2500 Watts RMS Frequency Response 10 Hz - 250 Hz S/N Ratio Greater than 92 Damping Factor Greater than 93 Input Sensitivity 5 V - 0.15 V Subsonic Filter 10 Hz - 50 Hz Low-Pass Filter 20 Hz - 200 Hz Dimensions in (LxWxH) 15.39" x 7.75" x 2.44" Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Reviews (1 review) Write a Review 1 Review Hide Reviews Show Reviews 5 Great amplifier Posted by Memphis Houston on 10/22/2025 Best bang for the buck in a small system!!! Small footprint; BIG BANG!

S Series Monoblock Amplifier

Product Overview The SoundQubed S1-850 Monoblock Amp offers unrivaled Class D power at an unbeatable price. This heavy-duty car subwoofer amplifier delivers more than 900 Watts RMS through a single channel for subwoofer or array applications. Mount the S1-850 just about anywhere. Our most affordable and compact monoblock car amplifier has a deceptively small form factor. You’ll be able to get a big booming sound with a small footprint. The S1-850’s 900 Watts RMS of Class D power in a single channel subwoofer amplifier offers heavy-duty peak power. This is capable of over 1000 Watts RMS on 16 volts. It’s an unbeatable monoblock amplifier ideal for daily drivers who need more bass from their car stereo system. The heavy-duty printed circuit board features both thermal protection for high heat situations, as well as speaker protection. Of course, be sure to power-match your subs to the RMS power output for your car audio system voltage. An on-board low pass filter lets you limit which frequencies are amplified, for ultimate performance out of your sub amp. The subsonic filter helps prevent extreme low-end distortion. Additionally, an LED clipping indicator on the included bass remote gives you the subwoofer control you need to avoid coil damage! The single-channel S1-850 has 4 gauge set screw power terminals and 10 gauge speaker terminals to pump clean power to your HDS2.3 subwoofer build maintains optimum sound quality and consistent voltage. This deceptively small beast of a mono amplifier does its job so reliably and efficiently, you’ll want two! If you need more wattage than this budget gem offers, the S1-850 mono amp is strappable to drive dominating bass as you level-up your build! Single channel 900 Watts RMS @ 1 Ohm Class D 1 Ohm stable 4 AWG power inputs Model S1-850 Class Class D Channels 1 channel Working Voltage 8.5 V - 16 V Maximum Amperage 90 Power @ 4 Ohm 14.4V 375 Watts RMS Power @ 2 Ohm 14.4V 625 Watts RMS Power @ 1 Ohm 14.4V 900 Watts RMS Frequency Response 10 Hz - 200 Hz S/N Ratio Greater than 80 Damping Factor Greater than 100 Input Sensitivity 5 V - 0.15 V Subsonic Filter 10 Hz - 50 Hz Low-Pass Filter 20 Hz - 200 Hz Dimensions in (LxWxH) 9.8 x 7.8 x 2.2 Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty Reviews (No reviews yet) Write a Review

SoundQubed audio product designed for powerful, affordable performance. High-quality construction with competition-grade components. Engineered for impressive bass output and reliable operation at accessible price points.

Product Overview The S4-100 is a high-efficiency Class D multi-channel amplifier with a host of tone control options. The S4-100 balances deep and loud low ends with power for mids and highs. With the S4-100, you’ll have 175 Watts per channel in stereo on four channels at 2 Ohm and 100 Watts per channel in stereo on four channels at 4 Ohm. For more power-hungry car stereos, it can be run in stereo at 375 Watts at 4 Ohm on two channels. This is perfect for driving one S4-100 to each door for car audio competitions and sound quality systems. If increased volume and sound quality are what you want, look to SoundQubed mid-range speakers and tweeters for maximum sound quality and volume for your car audio system. Utilize the S4-100’s high pass crossovers to direct precisely tuned tones to your tweeters and midrange speakers. These filters prevent speaker damage and interference from low range bass tones. The multi-channel amp’s bandpass filter will make it easier to define what frequencies are eliminated from your car stereo system on the high and low end. This is ideal for separating the mid-range speaker tone from your tweeters. An included low pass filter lets you choose what and how much low frequency is sent to your speakers. The power terminals secure your cables with 4-gauge set screws and speakers connect to the output terminals with 10 gauge set screws. If you’re considering a separate subwoofer amplifier for your vehicle’s build, the S1-850 and Q1-1200.2 are perfect playmates for sound quality and bass! Open up new sonic options in your stereo system design when upgrading your stock speakers with the versatile S4-100 multi-channel amplifier. 4 Channel 175 Watts (RMS) @ 2 Ohm 2-Ohm stable 4 AWG inputs Model S4-100 Class Class D Channels 4 channels Working Voltage 12-15.8 volts Maximum Amperage 75 Amps Power @ 4 Ohm Stereo 100 Watts x 4 channels Power @ 2 Ohm Stereo 175 Watts x 4 channels Power @ 4 Ohm Mono 370 Watts x 2 channels Frequency Response 10 Hz - 40 kHz S/N Ratio Greater than 80 Damping Factor Greater than 100 Input Sensitivity 8 V - 0.2 V Subsonic Filter 20 Hz - 5 kHz Low-Pass Filter 50 Hz - 5 kHz Dimensions in (LxWxH) 7.87 x 7.75 x 2.24 Warranty Information SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED EXTENDING BEYOND THOSE SET FORTH ABOVE Reviews (No reviews yet) Write a Review