Pioneer Amplifiers

4-Channel - Class D, 400w Max Power - Bridgeable Amplifier

2-Channel - Class AB, 500W Max Power - Bridgeable Amplifier

4-Channel - Class AB, 520W Max Power - Bridgeable Amplifier

4-Channel - Class AB, 1000W Max Power - Bridgeable Amplifier

This is a Pioneer Reconditioned product, including a 90-day limited warranty. The GM-A6704 4-channel amplifier will greatly improve the sound quality in your vehicle. This amplifier powers your front and rear speakers with 60 watts RMS each, allowing you to hear much more of the little details in your music, especially when you turn your system up to overcome road noise. With this amplifier, you can run your front speakers with the “A” channels and combine the “B” channels to drive a subwoofer. You can also set this versatile amp to 2-channel mode to send 190 watts RMS each to a couple of component speakers or subwoofers. Speaker-level inputs also allow you to add this amplifier to a factory-installed audio source that does not have pre-amplified outputs.

Experience unparalleled sound quality with compatibility for high-resolution audio sources, delivering rich detail, an expansive soundstage, and stunning realism. Engineered with high-performance operational amplifiers, the GM-DX104 minimizes noise in small-signal circuits to produce crystal-clear tones across a wide bandwidth. This compact amplifier also offers the flexibility to amplify 4, 3, or 2 speakers by bridging or not bridging the outputs, resulting in available power of 4x 45 watts RMS at 4 ohms or 90 watts RMS when bridged. Its compact, energy-efficient design and high-voltage compatibility ensure effortless installation in virtually any vehicle, making it the ultimate choice for audiophiles seeking exceptional performance and versatility.  

1-Channel – Class D, 1600 W Max Power – Digital Amplifier

The Pioneer GM-DX874 four-channel amplifier delivers 100 watts RMS at 4 ohms to each of your front and rear speakers for powerful music. CTA-2006 compliant, this highly efficient Class D technology provides impressive, high-quality power in a compact chassis. The frequency response extends up to 50,000 Hz, supporting crystal-clear Hi-Res Audio Certified playback. The GM-DX874 uses high-grade electronic components and gold-plated RCA connections to ensure maximum performance. You can configure your amplifier into 3-channel mode (4 ohm loads) to create a strong front soundstage (2x 75 watts RMS) with tight bass from the bridged subwoofer (1x 300 watts RMS). The speaker-level inputs allow you to install this amp in a factory system without RCA connections. Built-in high-pass and low-pass filters let you optimize the sound for your vehicle's interior. A wired bass control remote also lets you easily control the amount of bass from the subwoofer output (SW).

The GM-DX975 five-channel amplifier can power your entire car audio system, delivering 75 watts RMS at 4 ohms to each of your front and rear speakers, and 350 watts RMS at 4 ohms, or up to 600 watts RMS at 2 ohms, to your subwoofer. CTA-2006 compliant, this highly efficient Class D technology provides impressive, high-quality power in a compact chassis. The frequency response of the full-range channels extends up to 50,000 Hz, supporting crystal-clear Hi-Res Audio Certified playback. The GM-DX975 uses high-grade electronic components and gold-plated RCA connections to ensure maximum performance.You can set your GM-DX975 to 3-channel mode to create a strong front soundstage with tight bass, outputting up to 200 watts RMS each at 4 ohms to a set of high-performance components up front, plus up to 600 watts RMS at 2 ohms to your subwoofer. The speaker-level inputs allow you to install this amp in a factory system without RCA connections. Built-in high-pass and low-pass filters let you optimize the sound for your vehicle's interior. A wired bass control remote also lets you easily control the amount of bass from the subwoofer output (SW).

The Pioneer GM-E190X2 2-channel bridgeable amplifier is designed for high power output and performance, delivering exceptional sound quality. It features large-capacity electrolytic capacitors for increased voltage stability and the instantaneous output of large currents. The improved circuit design, utilizing a PCB board made of glass epoxy substrate, ensures high conductivity, increased temperature stability, and enhanced insulation resistance. For added flexibility, a variable LPF and HPF allow for fine-tuning your audio system, along with a two-step Bass Boost for optimal bass level adjustments according to listening preferences and music characteristics. This amplifier is compatible with both OEM and aftermarket head units.

The Pioneer GM-E360X4 4-channel bridgeable amplifier is built for high power output and performance to deliver great sound. Features include large-capacity electrolytic capacitors for increased voltage stability and instantaneous output of large current. Improved circuit design using a PCB board made of glass epoxy substrate delivers high conductivity, increased temperature stability, and improved insulation resistance. For added flexibility, a variable LPF and HPF allow fine-tuning your audio system along with a two-step Bass Boost for optimal bass level adjustments according to listening preferences and music characteristics. This amplifier can be used with either OEM or Aftermarket HeadUnits.

2-Channel - Class AB, 1000W Max Power - Bridgeable Amplifier

The GM-A5702 2-channel amplifier will greatly improve the sound quality in your vehicle. This amplifier powers your pair of speakers with 150 watts RMS each, allowing you to hear more of the finer details in your music, especially when you turn up the volume to overcome road noise. With this amplifier, you can combine the channels to drive a subwoofer with a total power of 480 watts RMS. Additionally, speaker-level inputs allow you to add this amplifier to a factory-installed audio source that does not have pre-amplified outputs.

4-Channel - Class D, 400w Max Power - Bridgeable Amplifier

Experience unparalleled sound quality with compatibility for high-resolution audio sources, delivering rich detail, an expansive soundstage, and stunning realism. Engineered with high-performance operational amplifiers, the GM-DX104 minimizes noise in small-signal circuits to produce crystal-clear tones across a wide bandwidth. This compact amplifier also offers the flexibility to amplify 4, 3, or 2 speakers by bridging or not bridging the outputs, resulting in available power of 4x 45 watts RMS at 4 ohms or 90 watts RMS when bridged. Its compact, energy-efficient design and high-voltage compatibility ensure effortless installation in virtually any vehicle, making it the ultimate choice for audiophiles seeking exceptional performance and versatility.

Pioneer GM-DX874 4-Channel Car Amplifier The Pioneer GM-DX874 four-channel amplifier delivers 100 watts RMS at 4 ohms to each of your front and rear speakers for powerful music. CTA-2006 compliant, this highly efficient Class D technology provides impressive, high-quality power in a compact chassis. The frequency response extends up to 50,000 Hz, supporting crystal-clear Hi-Res Audio Certified playback. The GM-DX874 uses high-grade electronic components and gold-plated RCA connections to ensure maximum performance.You can configure your amplifier into 3-channel mode (4 ohm loads) to create a strong front soundstage (2x 75 watts RMS) with tight bass from the bridged subwoofer (1x 300 watts RMS). The speaker-level inputs allow you to install this amp in a factory system without RCA connections. Built-in high-pass and low-pass filters let you optimize the sound for your vehicle's interior. A wired bass control remote also lets you easily control the amount of bass from the subwoofer output (SW).

4-Channel – Hi-Res Certified, Class FD, 1200 W Max Power – Digital Amplifier

The GM-DX971 is a 1-channel subwoofer amplifier that can deliver up to 1,200 watts RMS to your subwoofer, producing powerful bass with a strong and heavy beat. CTA-2006 compliant, this highly efficient Class D technology provides impressive, high-quality power in a compact chassis. The speaker-level inputs allow you to install this amp in a factory system without RCA connections. The built-in low-pass filter lets you optimize the sound for your vehicle's interior. A wired bass control remote also lets you easily control the amount of bass from the subwoofer output. The GM-DX971 amplifier uses high-current, high-grade electronic components and gold-plated RCA connections to ensure maximum performance.

1-Channel – Class D, 2400 W Max Power – Digital Amplifier

5-Channel – Hi-Res Certified, Class FD, 2000 W Max Power – Digital Amplifier

The GM-DX975 five-channel amplifier can power your entire car audio system, delivering 75 watts RMS at 4 ohms to each of your front and rear speakers, and 350 watts RMS at 4 ohms, or up to 600 watts RMS at 2 ohms, to your subwoofer. CTA-2006 compliant, this highly efficient Class D technology provides impressive, high-quality power in a compact chassis. The frequency response of the full-range channels extends up to 50,000 Hz, supporting crystal-clear Hi-Res Audio Certified playback. The GM-DX975 uses high-grade electronic components and gold-plated RCA connections to ensure maximum performance. You can set your GM-DX975 to 3-channel mode to create a strong front soundstage with tight bass, outputting up to 200 watts RMS each at 4 ohms to a set of high-performance components up front, plus up to 600 watts RMS at 2 ohms to your subwoofer. The speaker-level inputs allow you to install this amp in a factory system without RCA connections. Built-in high-pass and low-pass filters let you optimize the sound for your vehicle's interior. A wired bass control remote also lets you easily control the amount of bass from the subwoofer output (SW).

2-Channel - Class AB, 500w Max Power - Bridgeable Amplifier

The Pioneer GM-E190X2 2-channel bridgeable amplifier is designed for high power output and performance, delivering exceptional sound quality. It features large-capacity electrolytic capacitors for increased voltage stability and the instantaneous output of large currents. The improved circuit design, utilizing a PCB board made of glass epoxy substrate, ensures high conductivity, increased temperature stability, and enhanced insulation resistance. For added flexibility, a variable LPF and HPF allow for fine-tuning your audio system, along with a two-step Bass Boost for optimal bass level adjustments according to listening preferences and music characteristics. This amplifier is compatible with both OEM and aftermarket head units.

The Pioneer GM-E360X4 4-channel bridgeable amplifier is built for high power output and performance to deliver great sound. Features include large-capacity electrolytic capacitors for increased voltage stability and instantaneous output of large current. Improved circuit design using a PCB board made of glass epoxy substrate delivers high conductivity, increased temperature stability, and improved insulation resistance. For added flexibility, a variable LPF and HPF allow fine-tuning your audio system along with a two-step Bass Boost for optimal bass level adjustments according to listening preferences and music characteristics. This amplifier can be used with either OEM or Aftermarket HeadUnits.

4-Channel - Class AB, 1000w Max Power - Bridgeable Amplifier