LOUD AF! Amplifiers

Price is per pair USA machined aluminum 1/0 amplifier inputs. The flat and the set screw are inverse sides. These have been specially made to pair with your flipped amp install with an Acrylic backplate!  Price is per pair

USA machined aluminum  amplifier speaker inputs. The flat and the set screw are inverse sides. These have been specially made to pair with your flipped amp install with an Acrylic backplate Price is per pair

1/2" thick clear acrylic amp rack.   1) Enter dimensions for your amp mounting holes in box under price. Inches or millimeters accepted. *Input you amplifier mounting feet center to center hole dimensions.  Your amp mounting holes will be drilled  to these dimensions.  Returns not accepted if your measurements are not correct.  *Example: 27.625" length  8.25" width will result in four holes being drilled and tapped, two 8.25" apart center to center of hole, and two 27.625" apart center to center.     2) Enter your thread choice for your amp mounting taps.  Acceptable choices are 10-32, 10-24 or 1/4-20. 3) Enter your mounting hole diameter choice.  Four holes will be drilled, hidden under the amplifier to mount your rack plate down.  Acceptable choices are 1/4" to 1/2" diameter.  Mounting hardware is not provided.  4) Enter your outer dimensions of the rack plate.  Plate will come with center rectangle hole for wire pass through.  Rack plate will also come with 4 holes for you to mount it to floor or your own standoff for floating look. 5) Standard edge is flame polished edge. Contact me for quote on beveled router edge.  Price is $3 per linear foot.

  Curious how we do the LED? Click this link for the video!  *These are built into the back plate therefor cannot be ordered separately.   *Add LED to your back plate!  These are SPECIAL LED embedded  into the plate to give the engraving that POP you crave!!!!  A classy black cover hides the LED from view.  Wires will exit the amp through the vents on the end-plate. I f your amp does not have end-plate vents, please don't buy this unless you are creative and handy. *These are based off amp length. It is up to you to order the correct length. Measure the length of your amp and choose the appropriate length product.  LAF will contact you if you make a mistake ordering length to collect payment for longer strip.. *If you order a single strip LED for your plate, it will not come with a connector on it, It will just come with 3' of wire soldered to the LED strip on the plate.  The LED connector wont fit out the side vent holes of the amp so I cannot connect it.  This is important if you order one of the cheapo controllers or the dream color controller- You will have to solder the provided connector to the end of the wires to connect.     *LED CONTROLLER DESCRIPTION HERE

Due to differences in build house manufacturing, some screw locations on Ampere plates may not line up perfect.  The rail for the screws extends the entire length of the amp and the screw can be driven into the rail at any point as long as the right size driver is used on the screw. The Black VS Silver options "SHOULD" line up with the oem holes but i have seen them not     1/8” thick acrylic backplates. These come standard with the brand artwork engraved on the plate. LED can be added in the Pimp My Amp section of the website. 

LOUD AF audio product designed for extreme SPL competition and high-output applications. Built for maximum power handling and bass output. Engineered for serious competitors and bass enthusiasts.

1/8” thick acrylic backplates. These come standard with the brand artwork engraved on the plate. LED can be added in the Pimp My Amp section of the website.    *** Zero Five Falcon & Great White-  The fans are tied to a header bar that attaches to the backplate.  Per B2, we can cut the fan wires and add wire to tie them all to the white plug into the board.  If you're not comfortable doing this don't order the plate or take it to an installer to do for you.  Take note of the fans orientation prior to removal.  They need to go back exactly the same way, two push and two pull.  

1/8” thick acrylic backplates. These come standard with the brand artwork engraved on the plate. LED can be added in the Pimp My Amp section of the website. 

1/8” thick acrylic backplates. These come standard with the brand artwork engraved on the plate. LED can be added in the Pimp My Amp section of the website. 

Heavy duty steel amp racks made with single tab specifically for flipping amplifiers.  Made from strong 10g steel to support even the largest of amps. Perfect flipped amp rack for  any amp with a LAF backplate, D4S JP amps, Soundcubed amps, Surge Audio amps and more!  Price is for set of 4  3.25" height.  Lower profile for tighter installs.  If you need any extra height to this you can easily shim under the rack base to lift it up for the perfect height.

 These perform well for horizontal installs.  Vertical installs have not tested well on 8k and above size amps.  1/4" hardware coming soon for larger amps- will require drilling out the mounting hole on amp.  Solid steel racks coming soon for all levels of install.      Need a simple solution for flipping your amp to rock a backplate? Look no further....  3.25” long 3/8” diameter tubing standoff, 4” long 10-32 stainless steel screw, and 3/4” matching threaded insert.  Directions: WOOD Drill a 9/32" hole in your 3/4" wood base amp rack.  Add a drop of wood glue and screw insert in using 5mm hex driver.  Then space amp with tube and secure with provided screw.   METAL RACK Use tube and screw to stand off the amp, place washer on either side of rack, use lock nut on back of rack

1/8” thick acrylic backplates. These come standard with the brand artwork engraved on the plate. LED can be added in the Pimp My Amp section of the website. 

So far we only have the iconic Warhorse 10k available.

1/8” thick acrylic backplates. These come standard with the brand artwork engraved on the plate. LED can be added in the Pimp My Amp section of the website. 

1/16 abs removable access panels for applying sound deadener to.  Laser cut panel will allow you to apply the deadener material to cover the window access hole and still be removeable.  Be sure to hit the surface of the ABS good with 80-120 grit and clean with alcohol before applying sound dampener to ensure a good bond.  Use a heat gun on the dampener to further this bond.  Price is for per pair, shipped.  **does not come with sound deadener*** Product may be white or black depending on current stock.  Color wont matter as it will be covered up anyway.

1/8” thick acrylic backplates. These come standard with the brand artwork engraved on the plate. LED can be added in the Pimp My Amp section of the website.  Currently we only have plates for the original SQ amps (when they were under DD)  these are V1.  V2 is now owned by a new company and we do not have the models yet.  If you order one of these and then contact me saying it doesn't fit your V2 amp- I will not be able to accept a return.

1/8” thick acrylic backplates. These come standard with the brand artwork engraved on the plate. LED can be added in the Pimp My Amp section of the website.  *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!* Want some SALT BAE heat shrink to match your Salty backplate!?  Head on over to our partners at STR8CLPN and pic some up!!!! *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*      

1/8” thick acrylic backplates. These come standard with the brand artwork engraved on the plate. LED can be added in the Pimp My Amp section of the website. 

1/8” thick acrylic backplates. These come standard with the brand artwork engraved on the plate. LED can be added in the Pimp My Amp section of the website. 

Laser engraved acrylic backplate