BA

B2 Audio Amplifiers

Founded in 2008 in Denmark, B2 Audio is a premium car audio manufacturer known for high-end loudspeakers, subwoofers, and amplifiers. The brand embraces Viking heritage and Nordic craftsmanship, with products manufactured in Denmark, Italy, Brazil, and the USA. B2 Audio focuses on designing products that exceed expectations, appealing to audiophiles and enthusiasts who demand more than "good enough." Their tagline says it all: "It Can Never B2 Loud."

46 Products

12" Carbon Fiber Re-cone Kit Drop 1-Ohm 4" Coil Rampage

Perfect OEM Fit: Drop-in re-cone kit engineered specifically for the B2 RAMPAGE 12" 1-Ohm Dual Voice Coil subwoofer. Cost-Effective Repair: Extend the life of your subwoofer without the cost of a full replacement. Power Handling Maintained: Supports the original 5000W RMS / 10,000W peak power capabilities. Easy Installation: Designed for hassle-free replacement to quickly restore subwoofer performance. Premium Materials: Carbon fiber cone and TWS tall wide foam surround ensure durability and superior sound clarity. B2 Audio 12" Carbon Fiber Re-cone Kit Drop 1-Ohm 4" Coil Rampage Included In This Listing: (1) RAMPAGE12-D1-RC Re-cone Kit The B2 Audio RAMPAGE12-D1-RC Re-cone Kit is your go-to solution for restoring the brutal SPL power and elite performance of your RAMPAGE12-ELITE-D1 subwoofer. Designed specifically to match the carbon fiber cone, TWS foam surround, and 4" 8-layer aluminum dual 1-ohm voice coil, this kit brings your subwoofer back to life with exact OEM specifications. Crafted from top-grade materials for maximum durability and sound clarity, the re-cone kit extends the life of your investment without sacrificing the deep, clean bass or wide frequency response that make the RAMPAGE Series stand out. Installation is straightforward thanks to its drop-in design, perfect for audio pros and DIY enthusiasts alike. Whether you're aiming to maintain your SPL competition rig or keep your daily driver sounding like a beast, this re-cone kit ensures your subwoofer continues delivering serious low-end authority. Features: OEM-Grade Materials: Carbon fiber cone and TWS tall wide foam surround to replicate original sound quality and durability. Precision Fit: Engineered to perfectly fit the 12" dual 1-ohm 4" voice coil RAMPAGE subwoofer for seamless re-coning. Power Handling Maintained: Keeps the original 1-ohm DVC configuration for optimal amplifier compatibility. Restores Peak Performance: Returns your subwoofer to near-new condition, preserv

12" Rampage 2-Ohm 4" Coil Carbon Fiber Re-cone Kit Drop

Perfect OEM Fit: Drop-in re-cone kit engineered specifically for the B2 RAMPAGE 12" 2-Ohm Dual Voice Coil subwoofer. Cost-Effective Repair: Extend the life of your subwoofer without the cost of a full replacement. Power Handling Maintained: Supports the original 5000W RMS / 10,000W peak power capabilities. Easy Installation: Designed for hassle-free replacement to quickly restore subwoofer performance. Premium Materials: Carbon fiber cone and TWS tall wide foam surround ensure durability and superior sound clarity. B2 Audio 12" Rampage 2-Ohm 4" Coil Carbon Fiber Re-cone Kit Drop Included In This Listing: (1) RAMPAGE12-D2-RC Re-cone Kit The B2 Audio RAMPAGE12-D2-RC Re-cone Kit is your go-to solution for restoring the brutal SPL power and elite performance of your RAMPAGE12-ELITE-D2 subwoofer. Designed specifically to match the carbon fiber cone, TWS foam surround, and 4" 8-layer aluminum dual 2-ohm voice coil, this kit brings your subwoofer back to life with exact OEM specifications. Crafted from top-grade materials for maximum durability and sound clarity, the re-cone kit extends the life of your investment without sacrificing the deep, clean bass or wide frequency response that make the RAMPAGE Series stand out. Installation is straightforward thanks to its drop-in design, perfect for audio pros and DIY enthusiasts alike. Whether you're aiming to maintain your SPL competition rig or keep your daily driver sounding like a beast, this re-cone kit ensures your subwoofer continues delivering serious low-end authority. Features: OEM-Grade Materials: Carbon fiber cone and TWS tall wide foam surround to replicate original sound quality and durability. Precision Fit: Engineered to perfectly fit the 12" dual 2-ohm 4" voice coil RAMPAGE subwoofer for seamless re-coning. Power Handling Maintained: Keeps the original 2-ohm DVC configuration for optimal amplifier compatibility. Restores Peak Performance: Returns your subwoofer to near-new condition, preservi

2000 Watts RMS 1 Ohm Class D Monoblock Amplifier with Bass Knob RAGE-2000

Amplifier is at closeout price because of the bass knob reading in Celsius and not Fahrenheit. Each amp will be tested before shipping. This is a single batch of RAGE-2000 amps that is in limited supply. Reliable Power Output: Delivers up to 2,100 watts RMS at 1 Ohm Optimized Cooling System: Specially designed cooling technology ensures heat is dissipated efficiently, even under heavy load. Versatile Subwoofer Compatibility: Supports dual subwoofer setups with flexible 1 Ohm, 2 Ohm, and 4 Ohm connections. Precision Control Remote: Included remote features clipping monitoring, plus temperature and voltage displays for real-time oversight Heavy-Duty Power Terminals: Supports 0 Gauge Wire for Power/Ground Terminals & 8 Gauge Wire for Speaker terminals Amplifier is at closeout price because of the bass knob reading in Celsius and not Fahrenheit. Each amp will be tested before shipping. This is a single batch of RAGE-2000 amps that is in limited supply. 2000 Watts RMS 1 Ohm Class D Monoblock Amplifier with Bass Knob RAGE-2000 This listing includes: (1) 2000 Watts RMS 1 Ohm Monoblock Amplifier (1) Bass Knob Installation Hardware Enhanced Efficiency and Performance The B2 Audio RAGE2000.1 Monoblock Amplifier is engineered for high-performance audio systems, delivering powerful output while maintaining efficiency and reliability. This batch of amplifiers has been modified in the output section to reduce switching losses and lower output temperatures, enhancing overall thermal performance. Each unit has been individually modified and tested to ensure peak functionality. Additionally, these amplifiers include a bass knob with a temperature display in Celsius instead of Fahrenheit. While we transition to a future version with Fahrenheit readings, this batch is being offered at a discounted price, making it an excellent opportunity to upgrade your system. Key Features Compact and Powerful Design – Delivers high output while maintaining a space-efficient form factor. Advanced Cooling System – Reduces heat buildup for sustained performance under demanding conditions. High-Quality Power Terminals – Supports up to 35mm cross-section for optimal power delivery. Versatile Subwoofer Compatibility – Designed for flexible dual subwoofer setups. Integrated Level Remote – Provides clipping monitoring, temperature display, and voltage readout for precise control. REM/DC Power-On Settings – Allows selection between REM mode for traditional remote turn-on or DC mode for signal-based auto power-on. Specifications Frequency Range : 10 Hz ~ 250 Hz Signal-to-Noise Ratio : >90 dB Input Sensitivity : 6V ~ 0.2 V Low Pass Filter (LPF) : 24 dB/Octave, 50 Hz ~ 250 Hz Subsonic Filter : 12 dB/Octave, 10 Hz ~ 50 Hz Power Ground Terminals : 0 GA Speaker Terminals : 8 GA Fuse Recommendation : 200 A Voltage Range : 10 V ~ 16 V Power @ 4 Ohm : 720 W RMS Power @ 2 Ohm : 1200 W RMS Power @ 1 Ohm : 2100 W RMS Dimensions Length: 9.5" Width: 7" Height: 2" Weight: 4.6 lbs Take advantage of this limited-time discount and experience the performance of the RAGE-2000. Once this batch sells out, only the next version with a Fahrenheit-reading bass knob will be available.

4CH 1200W SQ Amplifier 4-ohm Bridgeable Class A/B Ref Four

Full-range Class A/B amplifier with 4-channel output for high-fidelity car audio Delivers up to 1200W RMS bridged at 4 ohms or 4 x 300W RMS at 2 ohms Built-in 24 dB/oct crossover, bass boost, and high/low pass filters for precise tuning Rugged construction with 0-gauge power terminals and compact 16.42" x 6.30" x 2.52" size B2 Audio 4CH 1200W SQ Amplifier 4-ohm Bridgeable Class A/B Ref Four This listing includes: (1) B2 Audio REF FOUR 4-Channel Class A/B Amplifier The B2 Audio REF FOUR is a robust, full-range 4-channel amplifier built with Class A/B topology for audiophiles who demand sound quality, headroom, and flexibility. With a wide frequency response of 15 Hz to 25 kHz, the REF FOUR delivers clean, controlled power across the entire audible spectrum. It features advanced crossover options, bass EQ boost, monitoring system with clipping indicators. Capable of pushing 4 x 300W RMS at 2 ohms or 2 x 1200W RMS bridged at 4 ohms, this amplifier is ready for both daily systems and competition-grade builds. Its rugged build, 0-gauge power terminals, and efficient layout make it a premium choice for high-performance installations. Specifications: Model: REF FOUR Circuit Configuration: Class A/B Frequency Response: 15 Hz – 25 kHz Signal to Noise Ratio: >90 dB Input Sensitivity: 6 V – 0.3 V Crossover Circuit: 24 dB/Oct Low Pass Crossover: 40 Hz – 400 Hz High Pass Crossover: 40 Hz – 4 kHz Bass EQ: 45 Hz / 0–12 dB Power Terminal Gauge: 0 Gauge / 67 mm Fuse Rating: 150 A Dimensions (All in Inches): 16.42" (Length) x 6.30" (Width) x 2.52" (Height) Continuous Output Power (RMS) @ 14.4V 1% THD: 4 Ohm: 4 x 200W RMS 2 Ohm: 4 x 300W RMS 4 Ohm Bridged: 2 x 1200W RMS Power Supply Requirements: Minimum Battery (AGM): 75 Ah / 1000 CCA Lithium Battery: 20 Ah minimum Measurements: Length: 18" Width: 6.5" Height: 3"

Amplifier Audio Distortion Detector Kit – Gain Calibration & Signal Testing

Amplifier Audio Distortion Detector Kit – Gain Calibration & Signal Testing This Listing Includes: (1) Distortion Detector (1) Protective silicone boot (1) Calibrated test tone CD (1) Harness This Amplifier Audio Distortion Detector Kit is a professional tool for calibrating amplifier gain and troubleshooting car audio systems. The detector isolates the audio signal from vehicle electrical noise, allowing installers and enthusiasts to measure head unit output accurately. Detect distortion caused by poorly designed or malfunctioning equipment, and maintain optimal sound quality in any vehicle. The included kit provides everything you need to get started: detector, silicone boot, test tone CD, and harness. Key Features & Benefits: Signal Isolation: Measures audio output without interference from vehicle electronics Direct Head Unit Testing: Quickly evaluate source unit output Replaceable Harness: Easy to repair in the field Complete Kit: Includes detector, silicone boot, calibrated CD, and harness Auto Shut-Off & LEDs: Signal present (750 mVrms), low battery (<5.6Vdc), and 8–10 minute timer Specifications: Signal Present LED Trigger Voltage: 750 mVrms Low Battery LED Trigger Voltage: <5.6 Vdc Auto Shut-Off Timer: 8–10 minutes Housing: ABS/plastic with silicone boot Harness: Replaceable

Amplifier Crossover Calibrator | Precision Frequency & Gain Tool

Amplifier Crossover Calibrator | Precision Frequency & Gain Tool This Listing Includes: (1) Crossover Calibrator (1) Calibrated Test Tone CD (1) Harness (1) Manual Description: Take the guesswork out of crossover tuning with this Amplifier Crossover Calibrator. Designed for installers and enthusiasts, this tool enables you to set amplifier crossover points quickly and accurately, ensuring optimal sound quality and system protection. Ideal for multi-amp systems and competition builds, it provides precise results when matching gains across multiple amplifiers. An isolated power design ensures that only the true audio signal is measured, not noise from the vehicle’s electrical system. Key Features: Precision Crossover Tuning: Sets frequencies with ±0.25dB accuracy. Multi-Amp Optimization: Matches gains across multiple amps for balanced output. Clean Signal Measurement: Isolated power prevents interference from vehicle noise. Versatile Testing: Can be used on amplifier or head unit outputs. Built to Last: Replaceable harness for extended tool life. Specifications: Digital microprocessor-controlled circuitry Crossover -3dB point accuracy: ±0.25dB Low battery LED trigger: < 6.5V DC Auto shut-off timer: 8–10 minutes after ON

Amplifier Signal Distortion Detector Plus | Gain & Clipping Tester

Amplifier Signal Distortion Detector Plus | Gain & Clipping Tester This Listing Includes: (1) Distortion Detector PLUS (1) Calibrated Test Tone CD (1) Harness (1) User Manual Product Description: Protect your amplifiers and speakers while optimizing system performance with this Amplifier Signal Distortion Detector Plus. Designed to detect distortion, clipping, and improper gain settings, it helps you fine-tune any audio system for clean, balanced sound. Continuously adjustable gain overlap (0.0–15.0dB in 0.1dB steps) and a Quasi-RMS voltmeter make it easy to troubleshoot and verify installs without altering existing settings. The complete kit includes a test tone CD and harness for professional-grade diagnostics. Features: Continuously variable gain overlap adjustment (0.0–15.0dB) Detects amplifier distortion and clipping at any frequency Verifies gain overlap without changing current settings Confirms install integrity after installation 200V maximum input, suitable for high-power systems Auto-shutoff 8–10 minutes after activation Battery self-test and low-battery LED indicator Specifications: Distortion Detection Trigger: >1.0% Harmonic Distortion Input Signal Range: 1.2Vrms – 200Vrms Low Battery Threshold: <6.5Vdc Dimensions: 9" x 6" x 2" Specific Uses / Applications: Optimizing gain overlap in car audio, home theater, and professional systems Detecting distortion and clipping in high-power amplifiers Verifying proper system installation and preventing speaker damage Field or workshop diagnostics for pro installers and serious enthusiasts

Audio Impedance, Dyno & Wattage Multimeter – Car Audio Testing Tool

Audio Impedance, Dyno & Wattage Multimeter – Car Audio Testing Tool This Listing Includes: (1) Audio Multimeter (1) Protective silicone boot (1) Harness This Audio Multimeter & Handheld Dyno is designed for car audio enthusiasts and installers to measure true amplifier power, speaker impedance, AC/DC voltage and current, apparent power, frequency, and more. It allows tuning of subwoofer enclosures for maximum power transfer, verifies impedance across frequencies, and measures phase differences for reactive loads. The included protective boot and harness ensure safe and reliable use. Key Features & Benefits: True Amplifier Power Measurement: Accurately measure wattage into any resistive or reactive load DC & AC Voltage/Current: Test voltage drops, AC/DC volts and amps, and apparent power Speaker Impedance Testing: Measure impedance from 20Hz–1kHz for boxes and subs Phase & Power Factor: Check phase difference to optimize system performance Subwoofer Tuning: Find enclosure tuning frequency and maximize power transfer Frequency Analysis: Measure audio signals from 10–20,000 Hz Durable Design: Includes silicone protective boot and field-replaceable harness Convenience Features: Auto-shutoff (8–10 min) and battery self-test Specifications: DC Voltmeter: –100 V to +100 V AC Voltmeter: 0–150 VRMS AC Ammeter: 0–100 ARMS AC Apparent Power: 0–15,000 VA True Power Dyno: 0–15,000 W Power Factor: 50–100% Frequency: 10–20,000 Hz AC Impedance: 0–200 Ω Auto-Shutoff: 8–10 minutes Battery Self-Test: Displayed at initialization Housing: ABS/plastic with silicone protective boot Power Source: 9V battery (user-replaceable) Dimensions: Height: 9" Width: 6" Depth: 2"

class A/B Ref Four 4CH 1200W SQ Amplifier 4-ohm Bridgeable

Full-range Class A/B amplifier with 4-channel output for high-fidelity car audio Delivers up to 1200W RMS bridged at 4 ohms or 4 x 300W RMS at 2 ohms Built-in 24 dB/oct crossover, bass boost, and high/low pass filters for precise tuning Rugged construction with 0-gauge power terminals and compact 16.42" x 6.30" x 2.52" size B2 Audio class A/B Ref Four 4CH 1200W SQ Amplifier 4-ohm Bridgeable This listing includes: (1) B2 Audio REF FOUR 4-Channel Class A/B Amplifier The B2 Audio REF FOUR is a robust, full-range 4-channel amplifier built with Class A/B topology for audiophiles who demand sound quality, headroom, and flexibility. With a wide frequency response of 15 Hz to 25 kHz, the REF FOUR delivers clean, controlled power across the entire audible spectrum. It features advanced crossover options, bass EQ boost, monitoring system with clipping indicators. Capable of pushing 4 x 300W RMS at 2 ohms or 2 x 1200W RMS bridged at 4 ohms, this amplifier is ready for both daily systems and competition-grade builds. Its rugged build, 0-gauge power terminals, and efficient layout make it a premium choice for high-performance installations. Specifications: Model: REF FOUR Circuit Configuration: Class A/B Frequency Response: 15 Hz – 25 kHz Signal to Noise Ratio: >90 dB Input Sensitivity: 6 V – 0.3 V Crossover Circuit: 24 dB/Oct Low Pass Crossover: 40 Hz – 400 Hz High Pass Crossover: 40 Hz – 4 kHz Bass EQ: 45 Hz / 0–12 dB Power Terminal Gauge: 0 Gauge / 67 mm Fuse Rating: 150 A Dimensions (All in Inches): 16.42" (Length) x 6.30" (Width) x 2.52" (Height) Continuous Output Power (RMS) @ 14.4V 1% THD: 4 Ohm: 4 x 200W RMS 2 Ohm: 4 x 300W RMS 4 Ohm Bridged: 2 x 1200W RMS Power Supply Requirements: Minimum Battery (AGM): 75 Ah / 1000 CCA Lithium Battery: 20 Ah minimum Measurements: Length: 18" Width: 6.5" Height: 3"

Custom 3D-Printed B2 Audio Amp Box for RC Car ZK-1001B Amplifier-Multiple Colors

Custom Fit for Daakro ZK-1001B – Designed to perfectly house your chip amplifier, providing secure and reliable protection. Premium Branding – Features the sleek and professional B2 Audio logo for a polished, high-end appearance. Compact & Efficient Design – Measures 3" x 1.5" x 2.25", ensuring a space-saving solution without compromising functionality. Durable USA Construction – Proudly 3D-printed in the USA with high-quality materials for long-lasting performance. Versatile & Stylish – Combines robust protection with a modern aesthetic, perfect for audiophiles and tech enthusiasts alike. Custom 3D-Printed B2 Audio Amp Box for RC Car ZK-1001B Amplifier This listing includes: (1) Custom 3D-Printed B2 Audio Amp Box for RC Car ZK-1001B Amplifier Elevate your setup with our precision-crafted 3D-printed enclosure, designed specifically for the Daakro ZK-1001B chip amplifier. Measuring a compact 3" x 1.5" x 2.25", this custom-fit box ensures a snug and secure housing for your amplifier, protecting it while maintaining accessibility. Proudly branded with the sleek B2 Audio logo, this enclosure adds a professional touch to your audio gear. Built in the USA using high-quality, durable materials, it offers excellent heat resistance and strength, ensuring long-term reliability for your amplifier. Key Features: Perfect Fit: Tailored for the Daakro ZK-1001B, eliminating the need for modifications. Compact Design: Maximizes space efficiency without compromising functionality. Durable Construction: Precision 3D-printed using high-quality materials for strength and longevity. USA Made: Crafted with care and attention to detail in the United States. Professional Branding: Features the B2 Audio logo for a polished, premium look. Dimensions: Length: 3.5" Width: 2.25" Height: 1.5" Weight: 1.1 oz Whether you're an audiophile or a DIY enthusiast, this enclosure combines style, practicality, and durability, making it the ideal choice for housing your Daakro ZK-1001B.

Custom 3D-Printed B2 Audio Amp Box for RC Car ZK-1002T Amplifier

Custom Fit for Daakro ZK-1002T – Designed to perfectly house your chip amplifier, providing secure and reliable protection. Premium Branding – Features the sleek and professional B2 Audio logo for a polished, high-end appearance. Compact & Efficient Design – Measures 4.08" x 3.20" x 1.30", ensuring a space-saving solution without compromising functionality.z Durable USA Construction – Proudly 3D-printed in the USA with high-quality materials for long-lasting performance. Versatile & Stylish – Combines robust protection with a modern aesthetic, perfect for audiophiles and tech enthusiasts alike. Custom 3D-Printed B2 Audio Amp Box for RC Car ZK-1002T Amplifier This listing includes: (1) Custom 3D-Printed B2 Audio Amp Box for RC Car ZK-1002T Amplifier Elevate your setup with our precision-crafted 3D-printed enclosure, designed specifically for the Daakro ZK-1002T chip amplifier. Measuring a compact 4.08" x 3.2" x 1.30", this custom-fit box ensures a snug and secure housing for your amplifier, protecting it while maintaining accessibility. Proudly branded with the sleek B2 Audio logo, this enclosure adds a professional touch to your audio gear. Built in the USA using high-quality, durable materials, it offers excellent heat resistance and strength, ensuring long-term reliability for your amplifier. Features: Perfect Fit: Tailored for the Daakro ZK-1002T, eliminating the need for modifications. Compact Design: Maximizes space efficiency without compromising functionality. Durable Construction: Precision 3D-printed using high-quality materials for strength and longevity. USA Made: Crafted with care and attention to detail in the United States. Professional Branding: Features the B2 Audio logo for a polished, premium look. Dimensions: Length: 1.08" Width: 3.20" Height: 1.5" Weight: 2 oz Whether you're an audiophile or a DIY enthusiast, this enclosure combines style, practicality, and durability, making it the ideal choice for housing your Daakro ZK-1002T.

Dual Voice Coil 1-OHM Drop-In Recone Kit RAMPAGE8

Engineered Perfection: Designed to rejuvenate your B2 Rampage8 D1 subwoofer with precision engineering and top-grade materials. Complete Kit: Includes (1) B2 Audio RAMPAGE8 DVC 1 OHM Drop-In Recone Kit for seamless restoration. Premium Materials: Constructed with high-quality cone, spider, and surround materials for durability and exceptional sound clarity. Enhanced Performance: Restores original punch and precision, enhancing bass depth, mid clarity, and overall frequency range. Unmatched Sound Quality: Delivers powerful, precise audio from deep bass to clear highs, revitalizing your audio system. B2 Audio Dual Voice Coil 1-OHM Drop-In Recone Kit RAMPAGE8 This listing includes: (1) B2 Audio RAMPAGE8 DVC 1 OHM Drop-In Recone Kit Engineered to perfection, this kit offers everything you need to breathe new life into your B2 Rampage8 D1 subwoofer. Whether you're a professional audio installer or an enthusiast looking to upgrade your setup, this recone kit provides a seamless solution for restoring your subwoofer to peak performance. Key Features: Premium Materials: Constructed from top-grade components, ensuring durability and longevity. The high-quality cone, spider, and surround materials deliver exceptional sound clarity and resilience. Precision Engineering: Designed to match the exact specifications of the B2 Rampage8 D1, guaranteeing a perfect fit and optimal performance. The drop-in design simplifies the recone process, saving you time and effort. Enhanced Performance: Experience deeper bass, clearer mids, and a wider frequency range. The recone kit restores your subwoofer's original punch and precision, enhancing your overall audio experience. Cost-Effective Solution: Save money by extending the life of your existing subwoofer. The recone kit offers a cost-effective alternative to purchasing a new subwoofer, delivering the same high-quality sound at a fraction of the price. Unmatched Sound Quality The B2 Audio Rampage8 D1 Drop-In Recone

Full Car Audio Package DVPE212 Loaded Enclosure w/ RGB Amplifiers w/ 6.5" Speakers

Complete System Combo – sub-bass + mids + power amps, all matched for one install. #YouCanNeverB2Loud with this B2 Audio system DVPE212 Dual 12" Enclosure – 2000W RMS vented box, tuned for extreme output and reliability RIOT 2500.1D RGB Amplifier – delivers 2500W RMS of clean bass power to subs RIOT 1800.4D RGB Amplifier – four-channel powerhouse for mids and highs (4) RIOT 6P Midrange Speakers – 6.5" high-output mids for vocals & instruments B2 Audio Full Car Audio Package DVPE212 Loaded Enclosure w/ RGB Amplifiers w/ 6.5" Speakers This Listing Includes: (1) B2 Audio DVPE212 Loaded 12" Subwoofer Enclosure (1) B2 Audio RIOT 2500.1D RGB Amplifier (1) B2 Audio RIOT 1800.4D RGB Amplifier (4) B2 Audio RIOT 6P 6.5" Speakers The ultimate balance of bass and mids in one powerhouse package. This bundle combines the DVPE212 dual 12" enclosure with the RIOT 2500.1D to drive your subs, the RIOT 1800.4D for crystal-clear midrange, and four RIOT 6P 6.5" speakers to bring your vocals and instruments forward. A complete combo for both daily enjoyment and show builds. B2-DVPE212 (Enclosure) Specifications: Frequency Response: 25 Hz - 200 Hz Sensitivity: 91 dB Nominal Impedance: Dual 2 Ohm Tuning Frequency: 35 Hz Power Handling: 1000W RMS / 2000W Max Enclosure volume: 3.05 cu. ft / 86.3L Port Area: 11.7 Cubic inches / 192 cm Port Length: 6.2" Configuration: Dual 12" Cone Material: Non-Pressed Coated Paper Voice Coil Dim: 2.5" Voice Coil Material: Copper Magnet Weight oz: 4 x 80 Oz Gross Weight: 68LB / 31Kg Dimensions: Length: 33" Width: 14.96" Depth: 16.53" RIOT 2500.1 (Amplifier) Specifications: Continuous Output Power (RMS) @ 4 Ohm 14.4V <1% THD: 800W Continuous Output Power (RMS) @ 2 Ohm 14.4V <1% THD: 1400W Continuous Output Power (RMS) @ 1 Ohm 14.4V <1% THD: 2500W Circuit Configuration: HI-EF Class D Frequency Response: 10 Hz - 250 Hz Signal to Noise Ratio: >90 DB Inpu

Full Car Audio Package DVPE212 Loaded Enclosure w/ RGB Amplifiers w/ 8" Speakers

Complete System Combo – sub-bass + mids + power amps, all matched for one install. #YouCanNeverB2Loud with this B2 Audio system DVPE212 Dual 12" Enclosure – 2000W RMS vented box, tuned for extreme output and reliability RIOT 2500.1D RGB Amplifier – delivers 2500W RMS of clean bass power to subs RIOT 1800.4D RGB Amplifier – four-channel powerhouse for mids and highs (4) RIOT 8P Midrange Speakers – 8" cone area for louder, punchier midrange presence B2 Audio Full Car Audio Package DVPE212 Loaded Enclosure w/ RGB Amplifiers w/ 8" Speakers This Listing Includes: (1) B2 Audio DVPE212 Loaded Dual 12" Subwoofer Enclosure (1) B2 Audio RIOT 2500.1D Amplifier (1) B2 Audio RIOT 1800.4D Amplifier (4) B2 Audio RIOT 8P 8" Midrange Speakers For those who want bigger mids and massive bass, this B2 Audio combo delivers. The DVPE212 enclosure is paired with the RIOT 2500.1D to push thunderous low frequencies, while the RIOT 1800.4D powers (4) RIOT 8P 8" mids for louder, more dynamic front stage performance. Perfect for demo builds, street setups, or anyone who wants serious output. B2-DVPE212 (Enclosure) Specifications: Frequency Response: 25 Hz - 200 Hz Sensitivity: 91 dB Nominal Impedance: Dual 2 Ohm Tuning Frequency: 35 Hz Power Handling: 1000W RMS / 2000W Max Enclosure volume: 3.05 cu. ft / 86.3L Port Area: 11.7 Cubic inches / 192 cm Port Length: 6.2" Configuration: Dual 12" Cone Material: Non-Pressed Coated Paper Voice Coil Dim: 2.5" Voice Coil Material: Copper Magnet Weight oz: 4 x 80 Oz Gross Weight: 68LB / 31Kg Dimensions: Length: 33" Width: 14.96" Depth: 16.53" RIOT 2500.1 (Amplifier) Specifications: Continuous Output Power (RMS) @ 4 Ohm 14.4V <1% THD: 800W Continuous Output Power (RMS) @ 2 Ohm 14.4V <1% THD: 1400W Continuous Output Power (RMS) @ 1 Ohm 14.4V <1% THD: 2500W Circuit Configuration: HI-EF Class D Frequency Response: 10 Hz - 250 Hz Signal to Noise Ratio: >90 DB

MANI 600 Watt 1-Ohm Car Audio Class D Compact Mono Bass Amplifier

Precision-Tuned Controls – Features a 24 dB/oct low-pass crossover (50 Hz – 500 Hz) and subsonic filter (5 Hz – 40 Hz) for fine-tuning your low-frequency response. Clean Signal, Low Noise – With a > 90 dB S/N ratio and damping factor > 400, expect crisp, distortion-free bass and tight control of your subwoofers. Compact Yet Powerful Design – Measuring only 10.6" (L) × 6.45" (W) × 2.28" (H), the MANI 600 provides big-amp authority in a small footprint, ideal for tight installations or stealth systems. Includes remote level control, high-level input capability, and 6-gauge power terminals for flexible wiring options. B2 Audio MANI 600 Watt 1-Ohm Class D High Efficiency Compact Mono Bass Amplifier This listing includes: (1) B2 Audio MANI 600 Monoblock Amplifier (1) Remote Level Control (1) High level input There are times when you need to make a statement, such as raising the bar and going beyond what has become the standard. For nearly a decade this has become synonymous with B2 Audio. Whether it being product like subwoofers and amplifiers, or even various competition formats in car audio, we have continuously set our standards higher. In Norse mythology, Mani drove the chariot that carried the moon across the sky. In relation to our products, it reflects looking to the sky as the limit while letting the product shine. These amplifiers are as compact as we've ever done, but the performance follows the credence of the Mani line up. Redefine, refine and redeem. This amp has sufficient amounts of power, performance and authority spiced up with the keystones of B2 Audio, this amplifier will provide you with numerous hours of joy and sweetness. *Important Note: Some of these amplifiers may have a cover plate that says 600.4 instead of 600, the amplifier is still the 600 Mono version. Specifications RMS Power @ 4 ohm 14.4v <1% THD: 450 W x 1 RMS Power @ 2 ohm 14.4v <1% THD: 600 W x 1 RMS Power @ 1 ohm 14.4v <1% THD: 600 W x 1 Freque

MANI 600 Watt 1-Ohm Class D High Efficiency Compact Mono Bass Amplifier

Precision-Tuned Controls – Features a 24 dB/oct low-pass crossover (50 Hz – 500 Hz) and subsonic filter (5 Hz – 40 Hz) for fine-tuning your low-frequency response. Clean Signal, Low Noise – With a > 90 dB S/N ratio and damping factor > 400, expect crisp, distortion-free bass and tight control of your subwoofers. Compact Yet Powerful Design – Measuring only 10.6" (L) × 6.45" (W) × 2.28" (H), the MANI 600 provides big-amp authority in a small footprint, ideal for tight installations or stealth systems. Includes remote level control, high-level input capability, and 6-gauge power terminals for flexible wiring options. B2 Audio MANI 600 Watt 1-Ohm Class D High Efficiency Compact Mono Bass Amplifier This listing includes: (1) B2 Audio MANI 600 Monoblock Amplifier (1) Remote Level Control (1) High level input There are times when you need to make a statement, such as raising the bar and going beyond what has become the standard. For nearly a decade this has become synonymous with B2 Audio. Whether it being product like subwoofers and amplifiers, or even various competition formats in car audio, we have continuously set our standards higher. In Norse mythology, Mani drove the chariot that carried the moon across the sky. In relation to our products, it reflects looking to the sky as the limit while letting the product shine. These amplifiers are as compact as we've ever done, but the performance follows the credence of the Mani line up. Redefine, refine and redeem. This amp has sufficient amounts of power, performance and authority spiced up with the keystones of B2 Audio, this amplifier will provide you with numerous hours of joy and sweetness. *Important Note: Some of these amplifiers may have a cover plate that says 600.4 instead of 600, the amplifier is still the 600 Mono version. Specifications RMS Power @ 4 ohm 14.4v 90 dB Input Sensitivity: 5v ~ 0.35v Power Terminal Gauge: 6 Gauge Fuse Rating: 70 Amps Damping Factor: >400 High level input: Yes Crossover Circuit: Crossover Circuit: 24 dB / Oct Low Pass Crossover: 50 Hz - 500 Hz High Pass Crossover: N/A Subsonic Crossover: 5 Hz - 40 Hz Bandpass Crossover: N/A Measurements: Length: 10.6" Width: 6.45" Height: 2.28" Weight: 3.3 lb

Pair of Dual 0GA to 0GA Amplifier Inputs With Anodized Finish & B2 logo engraved

High-Quality Construction: Made from durable materials with an anodized finish for long-lasting performance. Easy Amplifier Installation: Simplify your setup with dual 0GA to 0GA inputs, ensuring secure connections for optimal audio performance. Enhanced Connectivity: Designed for seamless integration with amplifiers, providing reliable power delivery. Stylish Design: Featuring a sleek red and black color combination with a modern anodized finish, adding a touch of style to your car audio system. Versatile Compatibility: Compatible with a wide range of car audio amplifiers for versatile installation options. B2 Audio Pair of Dual 0GA to 0GA Amplifier Inputs With Anodized Finish This Listing Includes: (1) Red Dual 0GA to 0GA Input (1) Black Dual 0GA to 0GA Input Upgrade your car audio system with the B2 Audio Pair of Dual 0GA to 0GA Amplifier Inputs. These inputs are crafted from high-quality materials with an anodized finish, ensuring durability and longevity. With dual 0GA to 0GA inputs in both red and black, this pair simplifies amplifier installation, providing secure connections for optimal audio performance. Designed for seamless integration with amplifiers, these inputs offer enhanced connectivity and reliable power delivery. Plus, their stylish design adds a touch of flair to your car audio setup. Whether you're a car audio enthusiast or a DIY installer, these amplifier inputs are the perfect addition to your audio system. Features: Durable construction with an anodized finish Dual 0GA to 0GA inputs for easy installation Reliable power delivery for optimal audio performance Stylish red and black color combination Compatible with a wide range of car audio

RAGE 2-Channel 2.3K 2300 Watt 2-Ohm Class D Full Range Amplifier

Massive Power Output: Unleash 2300 watts of pure sound, delivering explosive bass and pristine highs that transform your audio setup. Hi-EF Class D Technology: Experience high-efficiency performance with advanced Class D technology that maximizes output while minimizing energy consumption. 2-Channel Bridge Design: Enjoy versatile configuration options with the 2-channel bridge design, offering control and flexibility for a customized audio experience. Advanced Protection Features: Safeguard your system with built-in protection against thermal overload, short circuits, and overcurrent, ensuring reliable performance. Compact and Sleek: Integrate this powerhouse seamlessly into any audio setup with its compact design, offering a powerful punch without taking up unnecessary space. B2 Audio RAGE 2.3K 2300 Watt 2-Channel 2-Ohm Class D Bridgeable Amplifier This Listing Includes: (1) 2.3k 2 Ohm 2 Channel Amplifier RAGE-2300.2 (1) User Manual Mounting Hardware (2) Hex wrenches Unleash raw audio power and intensity with the B2 Audio RAGE Series 2300 Watt 2-Channel Hi-EF Class D Bridge Amplifier. This beastly amplifier is designed for audio enthusiasts who crave unbridled strength and superior performance. Delivering a massive 2300 watts of pure sound, it transforms your setup into a sonic battlefield. The Hi-EF Class D technology ensures maximum efficiency and explosive output, delivering ground-shaking bass and crisp highs without the energy drain. Its 2-channel bridge design offers versatile configuration options to push your system to its limits, giving you control and flexibility for a customized sound experience. Engineered to handle the most demanding audio environments, the RAGE Series amplifier features advanced protection measures against thermal overload, short circuits, and overcurrent, ensuring your system stays safe even when pushed to the max. Its sleek design and compact footprint make it a seamless addition to any audio setup, while still packing a powerful punch. Get ready to dominate your audio world with the B2 Audio RAGE Series 2300 Watt 2-Channel Hi-EF Class D Bridge Amplifier. This powerhouse will take your sound to new heights, delivering the kind of performance that shakes your senses and leaves you craving more. Elevate your audio experience and embrace the rage! Specifications: RMS Power @ 4 ohm: 2 x 650 Watts RMS Power @ 2 ohm: 2 x 1150 Watts RMS Power @ 4 ohm Bridged: 1 x 2300 Watts Circuit Configuration: HI-EF CLASS D Frequency Response: 10 Hz - 27 KHz Signal to Noise Ratio: > 95 dB Input Sensitivity: 5 V - 0.2 V Crossover Circuit: 24 dB / OCT Low Pass Crossover: 50 Hz - 5 KHz High Pass Crossover: 30 Hz - 5 Khz Power Terminal Guage: 0 GA Fuse Rating: 250 A Measurements: Length: 12" / 305 mm Width: 7.87" / 200 mm Height: 2.75" / 70 mm

RAGE 3500 3.5K Watt 1-Ohm Class D Full Range Monoblock Amplifier

Massive 3500-Watt Power – Unleash extreme power and performance with a true 3500-watt monoblock amplifier, delivering deep, hard-hitting bass. Full Range Class D Technology – Enjoy superior sound clarity, efficiency, and power handling with cutting-edge Class D circuitry. Versatile Subwoofer Compatibility – Perfect for high-performance car audio systems, bringing out the best in your subwoofers. Includes Essential Accessories – Comes with a voltage/temp controller, remote wire, hex wrenches, and mounting screws for easy installation. B2 Audio RAGE 3500 3.5K Watt 1-Ohm Class D Full Range Monoblock Amplifier This Listing Includes: (1) B2-RAGE-3500 Amplifier (1) Bass Knob w/ Voltage / Temp Meter (1) Remote Wire Unleash the power of the B2 Audio RAGE Series 3.5K 3500 Watt 1-Ohm Class D Monoblock Amplifier. This amplifier delivers an earth-shattering 3500 watts of pure, relentless power at 1-ohm, transforming your audio setup into a thunderous soundscape with bone-rattling bass and electrifying performance. Designed with advanced Class D technology, it maximizes efficiency, offering intense, precise sound that will leave you craving more. Whether you’re upgrading for a premium listening experience or competing for supremacy, the RAGE 3.5K is the amplifier to dominate the scene. It features advanced protection against thermal overload, short circuits, and overcurrent, ensuring rock-solid reliability under even the most demanding conditions. With its sleek design and heavy-duty construction, the RAGE 3.5K seamlessly integrates into any high-performance system, ready to push the limits and take your audio experience to new heights. Embrace the power, embrace the rage Specifications RMS Power @ 4 ohm: 1050W -1200W RMS Power @ 2 ohm: 1850W - 2150W RMS Power @ 1 ohm: 3000W - 3500W Frequency Response: 10 Hz - 20 Khz Signal to Noise Ratio: > 90db Input Sensitivity: 6 V - 0.2 V Power Terminal Gauge: 0 Gauge Fuse Rating: 250A Bass Level: 30-80 Hz Crossover Circuit: Low Pass Crossover: 50Hz- 20Khz High Pass Crossover: 10 Hz - 2Khz Subsonic Crossover: 10 Hz - 2Khz Measurements: Length: 11.5 inches Width: 7.25 inches Height: 2.5 inches Weight: 7.25 pounds

RAGE 4 Channel 1.2k Amp W/ 2 RIOT6P Sets + RAGE H1 NEO Tweeters

B2 Audio RAGE 4 Channel 1.2k Amp W/ 2 RIOT6P Sets + RAGE H1 NEO Tweeters This Listing Includes: (1) 1.2k 4 Channel 2 Ohm RAGE Amplifier (4) Rage Series 4 Ohm 100W RMS H1-NEO Tweeters (4) MKT 250V 2.2uFJ Capacitors (4) B2 Audio Rage 6.5" Speaker Pair RAGE6P Unleash the rage with the B2 Audio Rage Series, featuring the B2 Audio Rage 6.5" 4-Ohm 120W RMS Mid-Range Speaker B2-RAGE6P, engineered for brutal efficiency with a powerful 120W RMS and thunderous maximum power handling of 250W. Precision-built for immersive audio, it boasts a 1.5" voice coil, 30 oz magnet, and a frequency response range of 90 - 6000 Hz, ensuring every detail is heard at deafening volumes with a sensitivity of 95.7 dB. Paired with the adrenaline-fueled performance of the B2 Audio Rage Series RAGE-H1-NEO Bullet Tweeters, revamped for sharper, more balanced sound reproduction across a wider frequency range, and powered by the B2 Audio RAGE Series 1200 Watt 4 Channel Hi-EF Class D Amplifier RAGE-1200.4-V2, delivering explosive, crystal-clear sound with advanced protection measures and unparalleled versatility. Elevate your sound experience, feel the power, and embrace the rage! Midrange Specifications: RMS Power Handling: 120W Maximum Power Handling: 250W Nominal Impedance: 4-Ohm Voice Coil Diameter: 1.5" (38.6 mm) Magnet Weight: 30 Oz Frequency Response: 90 6000 Hz Sensitivity: 95.7 dB Nominal Chassis Diameter: 6.5" (165 mm) Resonance Frequency: 94 Hz Voice Coil Material: CCAR Tweeter Specifications: RMS Power Handling: 100 Watts Max Power Handling: 200 Watts Nominal Impedance: 4-Ohm Voice Coil Diameter: 1" / 25.4 mm Magnet: Neodymium Frequency Response: 2 KHz - 20 Khz Sensitivity: 104 dB Throat Diameter: 2.3 " / 59 mm Winding Material: CCAW Diaphragm Type: Titanium Amplifier Specifications: RMS Power @ 4 ohm: 4 x 200 W RMS Power @ 2 ohm: 4 x 300 W RMS Power @ 1 ohm: N/A / 2 x 600 W (Bridged @ 4-Ohm) Circuit Configuration: HI-EF CLASS D Frequency Response: 10 Hz - 24 KHz (+/- 3dB) Signal to Noise Ratio: > 90 dB Input Sensitivity: 6 V - 0.2 V Crossover Circuit: 12 dB / OCT Low Pass Crossover: 50 Hz - 5 KHz High Pass Crossover: 20 Hz - 4 KHz Damping Factor: > 200 Power Terminal Guage: 0 AWG Fuse Rating: 100 A

RAGE 4 Channel 1.2k Amp W/ 2 RIOT6P Sets + RAGE T1 NEO Tweeters

B2 Audio RAGE 4 Channel 1.2k Amp W/ 2 RIOT6P Sets + RAGE T1 NEO Tweeters This Listing Includes: (1) 1.2k 4 Channel 2 Ohm RAGE Amplifier (4) Rage Series 4 Ohm 100W RMS T1-NEO Tweeters (4) MKT 250V 2.2uFJ Capacitors (4) B2 Audio Rage 6.5" Speaker Pair RAGE6P Unleash the rage with the B2 Audio Rage Series, featuring the B2 Audio Rage 6.5" 4-Ohm 120W RMS Mid-Range Speaker B2-RAGE6P, engineered for brutal efficiency with a powerful 120W RMS and thunderous maximum power handling of 250W. Precision-built for immersive audio, it boasts a 1.5" voice coil, 30 oz magnet, and a frequency response range of 90 - 6000 Hz, ensuring every detail is heard at deafening volumes with a sensitivity of 95.7 dB. Paired with the adrenaline-fueled performance of the B2 Audio Rage Series RAGE-T1-NEO Bullet Tweeters, revamped for sharper, more balanced sound reproduction across a wider frequency range, and powered by the B2 Audio RAGE Series 1200 Watt 4 Channel Hi-EF Class D Amplifier RAGE-1200.4-V2, delivering explosive, crystal-clear sound with advanced protection measures and unparalleled versatility. Elevate your sound experience, feel the power, and embrace the rage! Midrange Specifications: RMS Power Handling: 120W Maximum Power Handling: 250W Nominal Impedance: 4-Ohm Voice Coil Diameter: 1.5" (38.6 mm) Magnet Weight: 30 Oz Frequency Response: 90 6000 Hz Sensitivity: 95.7 dB Nominal Chassis Diameter: 6.5" (165 mm) Resonance Frequency: 94 Hz Voice Coil Material: CCAR Tweeter Specifications: RMS Power Handling: 100W Max Power Handling: 200W Nominal Impedance: 4 Ohm Voice Coil Diameter: 1" / 25.4mm Frequency Response: 3 KHz ~ 20 KHz Sensitivity: 106 dB Diaphragm Type: Titanium Amplifier Specifications: RMS Power @ 4 ohm: 4 x 200 W RMS Power @ 2 ohm: 4 x 300 W RMS Power @ 1 ohm: N/A / 2 x 600 W (Bridged @ 4-Ohm) Circuit Configuration: HI-EF CLASS D Frequency Response: 10 Hz - 24 KHz (+/- 3dB) Signal to Noise Ratio: > 90 dB Input Sensitivity: 6 V - 0.2 V Crossover Circuit: 12 dB / OCT Low Pass Crossover: 50 Hz - 5 KHz High Pass Crossover: 20 Hz - 4 KHz Damping Factor: > 200 Power Terminal Guage: 0 AWG Fuse Rating: 100 A

RAGE 4 Channel 1.2k Amp W/ 2 RIOT8P Sets + RAGE H1 NEO Tweeters

Includes two pairs of RIOT8P 8" midrange speakers and two pairs of RAGE H1 Neo tweeters RAGE 1200.4-V2 amplifier delivers up to 1200W RMS and advanced crossover control Midrange speakers feature 150W RMS power handling, water-resistant cones, and 97 dB SPL 4-channel Class D amp allows full-range or bridged operation for flexible setups Ideal for high-SPL builds, stunt walls, or vocal-focused audio systems B2 Audio 4-Channel Mid and High Combo with RIOT 8" Midrange, RAGE H1 Neo Tweeters, and 1200W Amplifier This listing includes: (2) Pairs of B2 Audio RIOT Series 8" 4-Ohm 150W Midrange Speakers (RIOT8P) (2) Pairs of B2 Audio RAGE Series 1" H1 Neodymium Tweeters (RAGE-H1-NEO) (1) B2 Audio RAGE Series 1200W 4-Channel Class D Amplifier (RAGE-1200.4-V2) This combo is built for sound enthusiasts who demand both aggressive midrange and pristine highs. Two pairs of RIOT8P 8" midrange speakers bring powerful, punchy mids with 150W RMS per speaker and 97 dB sensitivity, while two pairs of RAGE-H1-NEO tweeters deliver razor-sharp highs with titanium diaphragms and neodymium magnets for a lightweight, responsive top end. The RAGE-1200.4-V2 4-channel Class D amplifier powers the setup with precision and flexibility, delivering clean, efficient output across a full frequency range. RIOT8P Midrange Specifications (each pair): RMS Power Handling: 150W Max Power Handling: 300W Nominal Impedance: 4 Ohm Voice Coil Diameter: 1.5 in Frequency Response: 80 – 10,000 Hz Sensitivity: 97 dB Magnet Weight: 23 oz Mounting Diameter: 7.2 in Mounting Depth: 3.23 in RAGE-H1-NEO Tweeter Specifications (each pair): RMS Power Handling: 100W Max Power Handling: 200W Nominal Impedance: 4 Ohm Voice Coil Diameter: 1 in Sensitivity: 104 dB Frequency Response: 2 KHz – 20 KHz Magnet: Neodymium Diaphragm: Titanium Mounting Depth: 2.48 in Overall Diameter: 3.85 in Amplifier Specifications (RAGE-1200.4-V2): RMS @ 4 Ohm: 4 x 200W RMS @ 2 Ohm: 4 x 300W Bridged @ 4 Ohm: 2 x 1200W Frequency Response: 20 Hz – 20 KHz Signal to Noise Ratio: > 90 dB Crossover Circuit: 12 dB/Oct Low/High Pass Crossover: 40 Hz – 4 KHz Power Terminal: 0 AWG Fuse Rating: 100A Dimensions: 10.9" L x 6.69" W x 2.26" H

RAGE 4 Channel 1.2k Amp W/ 2 RIOT8P Sets + RAGE T1 NEO Tweeters

Includes two pairs of RIOT8P 8" midrange speakers and two pairs of RAGE-T1-NEO tweeters Powered by RAGE 1200.4-V2 amplifier delivering up to 1200W RMS across 4 channels RAGE-T1-NEO tweeters feature titanium diaphragms and 106 dB SPL for crisp, high output Ideal for stunt walls, high-SPL builds, and voice/vocal-focused stage applications All components designed for clean performance under demanding conditions B2 Audio 4-Channel Mid and High Combo with RIOT 8" Midrange, RAGE T1 Tweeters, and 1200W Amplifier This listing includes: (2) Pairs of B2 Audio RIOT Series 8" 4-Ohm 150W Midrange Speakers (RIOT8P) (2) Pairs of B2 Audio RAGE Series 1" Bullet Tweeters (RAGE-T1-NEO) (1) B2 Audio RAGE Series 1200W 4-Channel Class D Amplifier (RAGE-1200.4-V2) Power your vocals and highs with authority using this aggressive mid/high combo from B2 Audio. It includes two pairs of RIOT8P 8" midrange speakers for hard-hitting mids with 150W RMS per speaker, plus two pairs of RAGE-T1-NEO bullet tweeters featuring titanium diaphragms and 100W RMS output each. Driving the setup is the RAGE-1200.4-V2 4-channel Class D amplifier with up to 1200W RMS output and advanced crossover controls. This combo is ideal for stunt walls, doors, or vocal-focused builds demanding crisp detail and raw output. RIOT8P Midrange Specifications (each pair): RMS Power Handling: 150W Max Power Handling: 300W Nominal Impedance: 4 Ohm Voice Coil Diameter: 1.5 in Frequency Response: 80 – 10,000 Hz Sensitivity: 97 dB Magnet Weight: 23 oz Overall Diameter: 8 in Mounting Diameter: 7.2 in Mounting Depth: 3.23 in RAGE-T1-NEO Tweeter Specifications (each pair): RMS Power Handling: 100W Max Power Handling: 200W Nominal Impedance: 4 Ohm Voice Coil Diameter: 1 in Sensitivity: 106 dB Frequency Response: 3 KHz – 20 KHz Diaphragm: Titanium Mounting Depth: 1.30 in Overall Diameter: 3.23 in Amplifier Specifications (RAGE-1200.4-V2): RMS @ 4 Ohm: 4 x 200W RMS @ 2 Ohm: 4 x 300W Bridged @ 4 Ohm: 2 x 1200W Frequency Response: 20 Hz – 20 KHz Signal to Noise Ratio: > 90 dB Crossover Circuit: 12 dB/Oct Low/High Pass Crossover: 40 Hz – 4 KHz Power Terminal: 0 AWG Fuse Rating: 100A Dimensions: 10.9" L x 6.69" W x 2.26" H

RAGE 4 Channel 800W Amp W/ 2 RIOT8P Sets + MANI 10TW Tweeters

B2 Audio RAGE 4 Channel 800W Amp W/ 2 RIOT8P Sets + MANI 10TW Tweeters This Listing Includes: (1) B2-RAGE-MI-800.4 Amplifier (2) Hi/Low Adapter Harness (4) 1" VC 30W Silk Dome Tweeters (4) Angled Tweeter Housings (4) 8" 4 Ohm 150W Speakers B2-RIOT8P Get ready to supercharge your sound with the B2 Audio RAGE Micro Series 800 Watt 4-Channel Class D Full Range Amplifier, engineered for intensity and precision. This powerhouse amplifier packs up to 800 watts of raw power across four channels, pushing your speakers to their limits for dynamic and vibrant sound. Utilizing Class D efficiency to maximize performance while minimizing heat generation, it ensures consistent, top-notch quality. Advanced protection features guard against overcurrent, short circuits, and thermal overload, ensuring smooth and safe operation. Pair it with the B2 Audio MANI 1" Silk Dome Tweeters for clear highs and easy installation. Then, elevate your audio with the B2 Audio RIOT 8" 4-Ohm 150W RMS Mid-Range Speakers RIOT8P, delivering dynamic energy and explosive clarity. With robust construction, seamless integration, and easy installation, this setup transforms every listening session into an adrenaline-pumping experience. Unleash the rage and dominate your audio world! Amplifier Specifications: Total Watts: 800 Watts RMS Power @ 4 ohm: 4 x 120 Watts RMS Power @ 2 ohm: 4 x 200 Watts Circuit Configuration: Class D Full Range Frequency Response: 20 Hz 20 KHz Signal to Noise Ratio: > 82 dB Input Sensitivity: 6 V 0.2 V Crossover Circuit: 12 dB / OCT Low Pass Crossover: 35 Hz 250 Hz High Pass Crossover: 35 Hz 250 Hz Damping Factor: > 400 Power Terminal Gauge: 8 AWG Fuse Rating: 50A Midrange Specifications: RMS Power Handling: 150 Watts Maximum Power Handling: 300 Watts Nominal Impedance: 4-Ohm Voice Coil Diameter: 1.5" / 38.6 mm Magnet Weight: 23 oz Frequency Response: 80 - 10000 Hz Sensitivity: 97 dB Nominal Chassis Diameter: 8" / 205 mm Resonance (natural) Frequency: 93 Hz Voice Coil Material: KCCAW Tweeter Specifications: RMS Power Handling: 30W Nominal Impedance: 4 Ohm Voice Coil Diameter: 1" Frequency Response: 50 Hz ~ 25 KHz

RAGE 4-Channel 1200 Watt 2-Ohm Class D Full Range Amplifier

Powerful 4-Channel Performance: Delivering 1200 watts of high-octane power across four channels, this amplifier provides intense, balanced sound for an unmatched audio experience. Hi-EF Class D Technology: Experience the cutting-edge efficiency and precision of Hi-EF Class D technology, maximizing power output while minimizing heat and energy consumption. Versatile Configuration: Whether you're powering a full-range car audio system or a dynamic home theater setup, the versatile 4-channel design adapts to your needs for custom sound solutions. Advanced Protection Features: Keep your system running at peak performance with built-in safeguards against thermal overload, short circuits, and overcurrent, ensuring reliability even under heavy use. Rugged and Compact Design: Engineered for durability and ease of installation, the amplifier's sleek and compact build fits seamlessly into any setup while standing up to the most demanding conditions. B2 Audio RAGE Series 1.2K 1200 Watt 4-Channel 2-Ohm Full Range Class D Amplifier This Listing Includes: (1) B2 Audio RAGE-1200.4-V2 Amplifier (1) User Manual Mounting Hardware Get ready to unleash a full-scale sonic revolution with the B2 Audio RAGE Series 1200 Watt 4-Channel Hi-EF Class D Amplifier — RAGE-1200.4-V2. This powerhouse amplifier doesn’t just play loud — it dominates . Designed for enthusiasts who crave intensity, precision, and authority, the RAGE-1200.4-V2 delivers 1200 watts of raw, unrelenting power across four channels, creating an audio experience that goes far beyond ordinary expectations. Engineered with advanced Hi-EF Class D technology, this amplifier maximizes efficiency while producing explosive, crystal-clear sound throughout the entire frequency spectrum. Whether you're pushing the limits of a custom car audio build, running active speakers, or powering a high-impact entertainment setup, the RAGE-1200.4-V2 provides the muscle, accuracy, and versatility needed to command any environment. Feel every beat with pinpoint precision — from deep, resonant bass you can feel in your chest to tight, articulate mids and razor-sharp highs. The RAGE Series amplifier uses refined circuitry to maintain a clean, distortion-free output, ensuring your sound stays sharp and defined even when the volume is pushed to the extreme. No mud, no blur — just pure, controlled power. Built for the bold and engineered for the daring, the RAGE-1200.4-V2 is housed in a rugged chassis designed to withstand the harshest conditions. With protection against thermal overload, short circuits, and overcurrent, this amplifier is ready to take on demanding installs, aggressive tuning, and long-term high-output performance — all while keeping your investment safe. If you're ready to elevate your audio system from average to extraordinary, the B2 Audio RAGE Series 1200 Watt 4 Channel Hi-EF Class D Amplifier is your weapon of choice. This is the amp that transforms your setup from a system into a soundscape — powerful, unstoppable, and unapologetically intense. Get ready to embrace the RAGE. Features 1200 Watts Total Power — serious output across four channels Hi-EF Class D Circuitry for maximum efficiency and reduced heat Crystal-clear highs, tight mids, and controlled bass Advanced protection features guard against thermal overload, short circuit, and over-current Bridging capability for flexible system builds Rugged chassis built for high-demand installations Specifications: RMS Power Output: 4-Ohms: 4 x 200 Watts RMS Power Output: 2-Ohms: 4 x 300 Watts RMS Power Output: 4-Ohms Bridged (1-Ohm per pair): 2 x 1200 Watts Circuit Type: Hi-EF Class D Frequency Response: 20 Hz - 20 kHz Signal-to-Noise Ratio: > 90 dB Input Sensitivity: 6V - 0.2V Crossover Slope: 12 dB / Octave Low-Pass Filter: 40 Hz - 4 kHz High-Pass Filter: 40 Hz - 4 kHz Damping Factor: > 200 Power Terminals: 0 AWG Compatible Fuse Rating: 100A Dimensions: Length: 10.25" Width: 6.38" Height: 2.5" Width including inputs and outputs: 7.25" Own the soundscape and elevate your entire audio system with an amplifier that refuses to compromise.

RAGE 4-Channel 2.3K 2300 Watt 2-Ohm Class D Full Range Amplifier

High-Powered Performance: With a total output of 2300W, this amplifier delivers powerful and clear sound to enhance your car audio system. Versatile Configuration: Equipped with Hi-EF Class D circuitry, it offers stable operation at 2 ohms, allowing for flexible setup options. Precise Audio Control: Featuring a 24 dB/octave crossover circuit with low and high pass options, you can fine-tune your audio to achieve optimal sound reproduction. Wide Frequency Response: Enjoy a wide frequency response ranging from 10 Hz to 27 KHz, ensuring accurate and detailed sound across the audio spectrum. Durable Construction: Built with high-quality materials and measuring 12" in length, 7.87" in width, and 2.75" in height, this amplifier is designed for long-lasting performance. B2 Audio RAGE 4-Channel 2.3K 2300 Watt 2-Ohm Class D Full Range Amplifier This Listing Includes: (1) 2300W 4CH 2-ohm Amplifier (1) Set of mounting Hardware Get ready to revolutionize your car audio experience with the B2 Audio RAGE 2300.4 4 Channel 2-Ohm Amplifier. With an astounding total output of 2300W and advanced Hi-EF Class D circuitry, this amplifier is engineered to deliver unparalleled power and stability. Featuring precise audio control options such as a 24 dB/octave crossover circuit and a wide frequency response, you have the tools to sculpt your sound to perfection. Built to withstand the toughest challenges, this amplifier is constructed for durability, ensuring relentless performance in any audio battle. Plus, with included mounting hardware, installation is a breeze. Dominate the road and unleash the rage with the B2 Audio RAGE 2300.4 Amplifier. Specifications: Total Watts: 2300W RMS Power @ 4 ohm: 1800W (4 x 450W) RMS Power @ 2 ohm: 2300W (4 x 575W) RMS Power @ 4 ohm Bridge: 2300W (2 x 1150W) Circuit Configuration: Hi-EF Class D Frequency Response: 10 Hz ~ 27 KHz Signal to Noise Ratio: 95 dB Input Sensitivity: 0.2V ~ 5V Crossover Circuit: 24 dB / Octave Low Pass Crossover: 50 Hz ~ 5 KHz High Pass Crossover: 30 Hz ~ 5 KHz Power Terminal Guage: 0 AWG Fuse Rating: 250 A Measurements: Length: 12" / 305mm Width: 7.87" / 200mm Height: 2.75" / 70mm

RAGE 4500 4.5K Watt 1-Ohm Monoblock Class-D Half Bridge Amplifier

Unleash The Beast: Introducing the RAGE4500, the ultimate powerhouse in the Rage series, delivering an unprecedented 4,500 watts of raw power to fuel your audio system's performance. More Guts, More Glory: With twice the power packed into a compact footprint, the RAGE4500 offers premium features and increased efficiency, setting new standards in amplifier technology. Logical Triples Design: Engineered with oversized 0 AWG power terminals, the RAGE4500 ensures optimal performance and ease of installation, making it a top contender in the high-power amplifier market. ACCU8 & Clip Indicators: Equipped with ACCU8 for precise crossover cutoff and clip indicators for full control over your signal path, the RAGE4500 empowers you to fine-tune your audio settings for optimal performance. Complete Package: This listing includes the RAGE Series 4500W 1 Ohm Monoblock Amplifier and a bass remote control with a clip LED for added convenience. B2 Audio RAGE 4500 4.5K Watt 1-Ohm Monoblock Class D Half Bridge Amplifier This Listing Includes: (1) RAGE Series 4500W 1 Ohm Monoblock Amplifier (1) Bass Remote Control W/ Clip LED (1) Set of Mounting Hardware Experience the unmatched power and performance of the B2 Audio RAGE Series 4.5K Watt 1-Ohm Monoblock Amplifier. The RAGE4500 is the pinnacle of the Rage series, boasting an astounding 4,500 watts of dynamic power output. Born from the same compact heatsink design as its predecessors but extended in length, this senior amp offers unparalleled power without compromising on install-friendliness. With premium features inherited from the Zero line amps and a beefed-up power supply, the RAGE4500 delivers exceptional clarity and depth to your audio system. Its logical triples design ensures easy installation and optimal performance, while ACCU8 and clip indicators provide precise control over your audio settings. Elevate your audio experience with the RAGE4500 and unleash the beast within. Specifications: Total Watts: 4500 RMS Power @ 4 ohm: 1600 Watts RMS Power @ 2 ohm: 3000 Watts RMS Power @ 1 ohm: 4500 Watts Circuit Configuration: Class D Half Bridge Frequency response: 10hz ~ 300Hz Signal to noise Ratio: >95dB Input Sensitivity: 5V ~0.2V Crossover Circuit: 24dB / Octave Low Pass Crossover: 35Hz ~ 250 Hz Subsonic Crossover: 10Hz ~ 50Hz Damping factor: >400 Power/Ground Terminal Gauge: 0 Ga Fuse Rating: 400A Measurements: Length: 21.46" / 545mm Width: 8.7" / 221mm Height: 2.55" / 65mm

RAGE 4800 Watt 1-Ohm Class D Full Range Monoblock Amplifier

Massive 4800-Watt Power – Delivering extreme power and performance for deep, thunderous bass. Built-In Protection Circuitry – Features safeguards against thermal overload, short circuits, and overcurrent for long-lasting performance. Versatile Subwoofer Compatibility – Designed to power high-performance subwoofers for competition-level bass. Complete Installation Kit Included – Comes with a voltage/temp controller, remote wire, hex wrenches, and mounting screws for easy setup. B2 Audio RAGE 4800 Watt 1-Ohm Class D Full Range Monoblock Amplifier This Listing Includes (1) B2-RAGE-4800 Amplifier (1) Bass Knob w/ Voltage / Temp Meter (1) Remote Wire Unleash the power of the B2 Audio RAGE Series 4800 Watt 1-Ohm Class D Monoblock Amplifier. Delivering 4800 watts of relentless power at 1-ohm, this amplifier transforms your audio setup with bone-rattling bass and electrifying performance. Powered by advanced Class D technology, it maximizes efficiency and power output, offering precise, intense sound that will leave you craving more. Designed for audiophiles and competitors alike, the RAGE 4800 features advanced protection against thermal overload, short circuits, and overcurrent, ensuring reliable performance even under extreme conditions. With its sleek design and robust construction, it’s the ultimate tool to push limits and dominate your audio world. Embrace the power, embrace the rage Specifications RMS Power @ 4 ohm: 1650W -1800W RMS Power @ 2 ohm: 3000W - 3250W RMS Power @ 1 ohm: 4800W - 5000W Frequency Response: 10 Hz - 20 Khz Signal to Noise Ratio: > 90db Input Sensitivity: 6 V - 0.2 V Power Terminal Gauge: 0 Gauge Fuse Rating: 400A Bass Level: 30-80 Hz Crossover Circuit Low Pass Crossover: 50Hz- 20Khz High Pass Crossover: 10 Hz - 2Khz Subsonic Crossover: 10 Hz - 2Khz Measurements Overall Length: 15.5 inches Overall Width: 7.25 inches Overall Height: 2.5 inches Overall Weight: 9.90 pounds

RAGE 5 Channel 1.6k Watt 4-Ohm Half Bridge Class-D Amplifier

High-Performance Amplification: Delivers 1600W of total power for a superior audio experience. Versatile Configuration: Bridgeable Class D amplifier with 5 channels, perfect for custom car audio setups. Precise Controls: Includes a bass knob/volt meter with LED indicators for easy monitoring and adjustment. Robust Construction: Comes with mounting hardware for secure installation in your vehicle. Wide Frequency Response: Ensures accurate sound reproduction across the audible spectrum. B2 Audio RAGE 5 Channel 1.6k Watt 4-Ohm Half Bridge Class-D Amplifier This Listing Includes: (1) 1.6k Watt 2 Ohm 5CH Class D Amplifier (1) Bass Knob/ Volt Meter With PWR/CLP/PRT/TEMP LED (1) Set of Mounting Hardware B2 Audio Rage 1600.5: Unleash the Power of 5 Channels! Tired of bulky multi-amp setups? The B2 Audio Rage 1600.5 is the sleek, powerhouse solution for running your entire car audio system with a single, compact amplifier. This Class D, 5-channel marvel is engineered to deliver serious, regulated power, making it an exceptional choice for audiophiles and bass enthusiasts alike. Unlike many competitors, the Rage 1600.5 delivers massive output from the subwoofer channel, pushing up to an incredible 1100 Watts at 1 Ohm. Combined with the clean power for your mids and highs, this amp provides a comprehensive, high-performance platform for a full-range system. Designed for a clean, professional install, all wiring inputs (power, ground, turn-on, and speaker outputs) are conveniently located on the bottom panel. Complete with a premium B2 Audio bass knob featuring a voltage/temp/clip indicator, the Rage 1600.5 ensures you have full control and visibility of your system's performance. Features: True 5-Channel Amplifier: Power your entire system from one unit. Class D Topology: Efficient, powerful, and small footprint. Regulated Power Supply: Delivers consistent, reliable power, often exceeding ratings (demonstrated 1780 Watts Max/RMS on the sub channel in real-world testing). High Subwoofer Output: Up to 1100 Watts @ 1 Ohm (mono) or 600 Watts @ 2 Ohms (mono). Premium Bass Knob Included: Features voltage, temperature, clipping, and power indicators. Clean Installation Design: All terminals and wiring outputs are located on the bottom of the amp. Certified Ratings: DB Drag Race Certified, USACi SQL, IASCA. Specifications: Total Watts: 1600W RMS Power @ 4 ohm: 670W (4 x 80W + 1 x 350W) RMS Power @ 2 ohm: 1100W (4 x 125W + 1 x 600W) RMS Power Bridged: 1600W (2 x 250 @ 4-Ohm + 1 x 1100 @ 1 Ohm Mono) Circuit Configuration: Hi-EF Class D Frequency Response: (CH 1-4: 10 Hz ~ 27 KHz) ( Ch5: 10Hz ~ 250 Hz) Signal to Noise Ratio: >95 DB Input Sensitivity: 0.2V ~ 5V Crossover Circuit: 24 dB / Octave Low Pass Crossover: (CH 1-4: 50 Hz ~ 5 KHz) ( Ch5: 35Hz ~ 250 Hz) High Pass Crossover: 30 Hz ~ 5 KHz Phase: 0-180 Level Control (with clip/volt/temp): Power Terminal Gauge: 0 AWG Fuse Rating: 150 A Measurements: Length: 16.73" / 425mm Width: 7.87" / 200mm Height: 2.75" / 70mm

RAGE 7800 Watt 1-Ohm Class D Full Range Monoblock Amplifier

Extreme Power Output: Delivers up to 8,000 Watts RMS at 1 Ohm for ground-shaking performance that drives even the most demanding subwoofers. Advanced Class D Design: Engineered for maximum efficiency with low heat buildup and precise power delivery across the full frequency range. Precision Tuning Control: Includes variable low-pass, high-pass, and subsonic crossovers from 10Hz–12.5kHz for ultimate flexibility and sound customization. Complete Installation Kit: Comes with bass knob featuring voltage and temperature display, remote wire, and sturdy terminals for 0-gauge power input. Built for Competition: Heavy-duty construction with multiple protection circuits against thermal overload, short circuit, and overcurrent for unmatched reliability. B2 Audio RAGE 7800 Watt 1-Ohm Class D Full Range Monoblock Amplifier This Listing Includes: (1) B2-RAGE-7800 Amplifier (1) Bass Knob w/ Voltage / Temp Meter (1) Remote Wire Unleash the power of the B2 Audio RAGE Series 3.5K 3500 Watt 1-Ohm Class D Monoblock Amplifier. This amplifier delivers an earth-shattering 3500 watts of pure, relentless power at 1-ohm, transforming your audio setup into a thunderous soundscape with bone-rattling bass and electrifying performance. Designed with advanced Class D technology, it maximizes efficiency, offering intense, precise sound that will leave you craving more. Whether you’re upgrading for a premium listening experience or competing for supremacy, the RAGE 3.5K is the amplifier to dominate the scene. It features advanced protection against thermal overload, short circuits, and overcurrent, ensuring rock-solid reliability under even the most demanding conditions. With its sleek design and heavy-duty construction, the RAGE 3.5K seamlessly integrates into any high-performance system, ready to push the limits and take your audio experience to new heights. Embrace the power, embrace the rage Specifications RMS Power @ 4 ohm: 2400W* - 2600 W RMS Power @ 2 ohm: 4200W* - 4500 W RMS Power @ 1 ohm: 7800W*- 8000 W Frequency Response:10 Hz - 12.5 KHz Signal to Noise Ratio: >90dB Input Sensitivity: 6 V - 0.2 V Power Terminal Gauge: 2 x 0 Gauge Recommended Speaker Wire: 10 AWG (Minimum) Fuse Rating: 600 A Bass Level: 30 Hz - 80 Hz * The lower number is based on amp dyno performance measured at 1000 KHZ for multi channels and 100 Hz for the mono. The other is audio precision up to 1% THD. Full output power according to the spec is based on a sufficient electrical supply system. Crossover Circuit: Low Pass Crossover: 30 Hz -12.5 Hz High Pass Crossover: 10 Hz - 2 KHz Subsonic Crossover: 10 Hz - 2 KHz Measurements: Length: 22" Width: 6.5" Height: 2.5" Weight: 14.95 Lbs Turn your setup into a powerhouse of clean, controlled, and unmatched sound. The B2 Audio RAGE 7800 isn’t just an amplifier, it’s a statement of dominance and precision for serious bass enthusiasts and competitors who demand the best.

RAGE Micro Series 1000W Half Bridge 1-Ohm Stable Amplifier

Unleash Raw Power: Dominate your car audio setup with 1000 Watts of RMS power at 1 ohm. Compact Beast: Despite its small size, this amplifier packs a punch, delivering thunderous bass. Precision Engineering: Class D Monoblock circuit configuration ensures optimal performance, while the low pass crossover delivers bone-shaking intensity. Clarity Amidst Chaos: With >95 dB signal to noise ratio, enjoy distortion-free sound even at high volumes. Space-Saving Design: Measuring just 7.91" x 4.33" x 1.81", this amplifier fits seamlessly into tight spaces while delivering unmatched performance. B2 Audio RAGE Micro Series 1000W Half Bridge 1-Ohm Stable Amplifier This Listing Includes: (1) MICRO Series 1-Ohm 1000W Monoblock Amplifier (1) Set of Mounting Screws Prepare to unleash raw power with the B2 Audio RAGE MI Series 1000W Monoblock 1-Ohm Stable Micro Amplifier. This isn't just another amp, it's a compact beast designed to dominate your car audio setup. With a relentless 1000 Watts of RMS power at 1 ohm, it's ready to push your speakers to their limits and beyond. Engineered with a Class D Monoblock circuit configuration, this amplifier delivers thunderous bass with precision. Its low pass crossover ensures that every note hits with bone-shaking intensity, while its >95 dB signal to noise ratio guarantees clarity even in the midst of chaos. And don't underestimate its size measuring at just 7.91" x 4.33" x 1.81", this amplifier packs a punch that will leave your competition trembling. So, if you're ready to take your car audio to the next level, buckle up and prepare for the ride of your life with the B2 Audio RAGE MI Series 1000W Monoblock Amplifier. Specifications: Total Watts: 1000W RMS Power @ 4 ohm: 400W RMS Power @ 2 ohm: 700W RMS Power @ 1 ohm: 1000W Circuit Configuration: Class D Monoblock Frequency Response: 18 Hz ~ 180 Hz Signal to Noise Ratio: 95 dB THD: > 1% Input Sensitivity: 0.2V ~ 6V Crossover Circuit: 12 DB / Octave Low Pass Crossover: 40 Hz ~ 180 KHz High Pass Crossover: N/A Damping Factor: >400 Power Terminal Gauge: 8 AWG Fuse Rating: 80 A Measurements: Length: 7.91" / 201mm Width: 4.33" / 110mm Height: 1.81" / 46mm

RAGE Micro Series 800 Watt 4-Channel 2-Ohm Class D Full Range Amplifier

Massive Power Output: Push your audio system to its limits with 800 watts of peak power across 4 channels, driving your speakers with precision and intensity. Class D Efficiency: Benefit from top-notch performance and reduced heat generation, thanks to advanced Class D technology that delivers efficient power output. Compact and Versatile: Enjoy the powerful performance of a large amplifier in a compact design, perfect for seamless integration into any car or home audio setup. Pristine Sound Quality: Experience clear, distortion-free audio across the full range, from crystal-clear highs to deep, resonant lows. Built-in Protection: Safeguard your system with advanced features that protect against overcurrent, short circuits, and thermal overload for reliable performance. B2 Audio RAGE Micro Series 800 Watt 4-Channel Class D Full Range Amplifier This Listing Includes: (1) B2-RAGE-MI-800.4 Amplifier (2) Hi/Low Adapter Harness (1) Users Manual (4) #2 Philip Screws (mounting hardware) Get ready to supercharge your sound with the B2 Audio RAGE Micro Series 800 Watt 4-Channel Class D Full Range Amplifier. This powerhouse amplifier is engineered for audiophiles who demand intensity and precision. Packing up to 800 watts of raw power across four channels, it pushes your speakers to their absolute limits, delivering dynamic and vibrant sound. This full-range amplifier utilizes Class D efficiency to maximize performance while minimizing heat generation, ensuring consistent, top-notch quality. The compact design makes it a breeze to integrate into any audio setup without compromising on power or functionality. The versatility of the four channels lets you push the boundaries of your sound system, whether you're driving high-end tweeters or subwoofers that rattle the windows. Enjoy pristine, distortion-free audio that captures every nuance, from soaring highs to thunderous lows. Advanced protection features guard against overcurrent, short circuits, and thermal overload, so your system operates smoothly and safely. Installation is straightforward, and compatibility with various car and home audio systems makes this amp a perfect fit for any setup. Take your audio experience to the next level with the B2 Audio RAGE Micro Series 800 Watt 4-Channel Class D Full Range Amplifier. Whether on the road or at home, this amp is ready to shake up your soundscape and deliver the power and performance you crave. Unleash the rage and dominate your audio world! Specifications: Total Watts: 800 Watts RMS Power @ 4 ohm: 4 x 120 Watts RMS Power @ 2 ohm: 4 x 200 Watts Circuit Configuration: Class D Full Range Frequency Response: 20 Hz 20 KHz Signal to Noise Ratio: > 82 dB Input Sensitivity: 6 V 0.2 V Crossover Circuit: 12 dB / OCT Low Pass Crossover: 35 Hz 250 Hz High Pass Crossover: 35 Hz 250 Hz Damping Factor: > 400 Power Terminal Gauge: 8 AWG Fuse Rating: 50A Measurements: Length: 4.76" / 121 mm Width: 4.33" / 110 mm Height: 1.81" / 46 mm

RAGE Series 3200 Watt 1-Channel Class D Full Bridge Mono Amplifier

Extreme Power Output: Unleash a staggering 3200 watts of peak power through a 1-channel full bridge design, delivering thunderous bass and intense soundscapes. Class D Efficiency: Enjoy high-performance amplification with exceptional efficiency, minimizing heat and maximizing power output for a superior audio experience. Rugged Reliability: Built for intense use, the amplifier features advanced protection against overheating, short circuits, and other potential hazards, ensuring consistent, long-lasting performance. Versatile Audio Control: Perfectly suited for driving massive subwoofers and transforming your sound system, this amplifier offers unparalleled flexibility for a custom audio setup. Compact, Seamless Fit: The sleek design integrates seamlessly into any audio configuration, providing a formidable punch without taking up unnecessary space. B2 Audio RAGE Series 3200 Watt 1-Channel Class D Full Bridge Mono Amplifier This Listing Includes: (1) B2-Rage-3200 Amplifier (1) Remote Wire (1) Voltage Level Controller (1) User Manual Mounting Hardware Unleash a new era of audio dominance with the B2 Audio RAGE Series 3200 Watt 1-Channel Class D Full Bridge Amplifier. This monster of an amplifier is engineered to crush the competition and redefine the limits of your sound system. With an astounding 3200 watts of raw, unrelenting power, the RAGE Series transforms your audio experience into a sonic earthquake. The 1-channel Class D full bridge design delivers explosive performance with exceptional efficiency, allowing you to push your system to its absolute limits without breaking a sweat. Say goodbye to distortion and hello to crystal-clear, high-fidelity sound that shakes your core and leaves you craving more. Designed for extreme flexibility, this powerhouse amplifier is the perfect match for your most demanding audio setups. Whether you're driving massive subwoofers or taking your car audio system to the next level, the RAGE Series stands ready to deliver bone-crushing bass and immersive soundscapes. Built to withstand intense use and deliver consistent, reliable performance, the RAGE Series amplifier features advanced protection measures against overheating, short circuits, and other potential hazards. Its compact design ensures a seamless fit into any audio setup, while still packing a formidable punch. Experience the next level of audio power with the B2 Audio RAGE Series 3200 Watt 1-Channel Class D Full Bridge Amplifier. It's time to take control of your sound and command the arena with jaw-dropping power and unrivaled performance. Get ready to ignite your audio experience and conquer the soundscape! Specifications: RMS Power @ 4 ohm: 1 x 1000 W (1100 W) RMS Power @ 2 ohm: 1 x 2000 W (2000 W) RMS Power @ 1 ohm: 1 x 3000 W (3200 W) Circuit Configuration: Hi-Ef Class D Full Bridge Frequency Response: 10 Hz - 24 KHz (+/- 3 DB) Signal to Noise Ratio: > 90 dB Input Sensitivity: 6 V - 0.2 V Crossover Circuit: 12 dB / OCT Low Pass Crossover: 50 Hz - 20 KHz High Pass Crossover: 10 Hz - 2 KHz Damping Factor: > 200 Power Terminal Gauge: 4 GA Fuse Rating: 250 A Measurements: Length: 10.6" / 27 cm Width: 6.69" / 17 cm Height: 2.26" / 5.7 cm

RAGE Series 5K 5000 Watt 1-Ohm Class D Full Bridge Monoblock Amplifier

Thunderous 5000-Watt Output: Experience the sheer force of 5000 watts of power at 1-ohm, delivering bone-rattling bass and electrifying performance that transforms your audio experience. Advanced Class D Technology: Harness the cutting-edge efficiency and precision of Class D technology, maximizing power output while minimizing energy consumption and heat generation. Robust Protection Features: Keep your system safe and sound with built-in safeguards against thermal overload, short circuits, and overcurrent, ensuring reliable performance even under heavy demand. Sleek, Compact Design: Seamlessly integrate the amplifier into any high-performance setup with its sleek and compact design, offering power without taking up unnecessary space. Engineered for High Performance: Built to withstand the demands of the most challenging audio environments, the RAGE 5K features rugged construction for enduring durability and peak performance. B2 Audio RAGE Series 5K 5000 Watt 1-Ohm Class D Full Bridge Monoblock Amplifier This Listing Includes: (1) B2-RAGE-5000 Amplifier (1) Voltage/Temp Controller (1) Remote Wire (2) Hex Wrenches Mounting Screws Prepare yourself for an audio experience like no other with the B2 Audio RAGE Series 5K 5000 Watt 1-Ohm Class D Monoblock Amplifier. This beast of an amplifier is a force to be reckoned with, delivering an earth-shattering 5000 watts of pure, relentless power at 1-ohm. The RAGE Series 5K transforms your audio setup into a thunderous soundscape, bringing bone-rattling bass and electrifying performance to every track. Designed with cutting-edge Class D technology, this monoblock amplifier maximizes efficiency and power output, providing intense, precise sound that will leave you craving more. Whether you're an audiophile looking for a groundbreaking upgrade or a competitor seeking to dominate the scene, the RAGE Series 5K is your ultimate weapon. Engineered for those who refuse to compromise, the RAGE 5K boasts advanced protection features against thermal overload, short circuits, and overcurrent, ensuring reliable performance even when pushed to the max. Its sleek design seamlessly integrates into any high-performance setup, while its robust construction handles the most demanding audio challenges. Dominate your audio world and leave the competition in your wake with the B2 Audio RAGE Series 5K 5000 Watt 1-Ohm Class D Monoblock Amplifier. This is the amplifier for those who want to push the limits, break barriers, and make their sound system truly legendary. Embrace the power, embrace the rage! Specifications: RMS Power @ 4 ohm: 3000 Watts RMS Power @ 2 ohm: 5000 Watts RMS Power @ 1 ohm: 5000 Watts Frequency Response: 10 Hz - 10 KHz Signal to Noise Ratio: > 90 dB Input Sensitivity: 5 V - 0.2 V Crossover Circuit: 12 dB / OCT Low Pass Crossover: 40 Hz - 10 KHz High Pass Crossover: 15 Hz - 500 Hz Damping Factor: > 200 Power Terminal Gauge: 0 GA x 2 Fuse Rating: 500 A Bass Level: 0 - 12 dB at 45 Hz Measurements: Length: 13.78" / 350 mm Width: 9.25" / 235 mm Height: 2.67" / 68 mm

Rechargeable LED Headlamp Work Light with Adjustable Headband Hands-Free Design

Rechargeable LED Headlamp Work Light with Adjustable Headband This Listing Includes: (1) Rechargeable LED Headlamp Description: Light up your work area with this rechargeable LED headlamp. Designed with a 230° wide-angle COB LED beam, an adjustable headband, and a convenient wave sensor, it delivers bright, hands-free illumination for any task. With a maximum output of 350 lumens and a 1200 mAh rechargeable battery, it offers up to 8 hours of use on low and 2.5 hours on high. Built with IPX4 water resistance and USB Type-C charging, this headlamp is perfect for work, outdoor activities, or emergency use. Features: Wide-Angle Beam – 230° COB LED provides broad illumination for better visibility Hands-Free Operation – Built-in wave sensor for quick and easy control Water Resistant – IPX4 rating ensures durability in various environments Rechargeable Power – 1200 mAh battery with up to 350 lumens of brightness Comfortable Fit – Adjustable headband designed for secure, all-day wear Specifications: Beam Angle: 230° wide COB LED Max Output: 350 lumens Battery: 1200 mAh rechargeable Modes: High (2.5 hrs) / Low (8 hrs) Charging: USB Type-C (approx. 3 hrs) Waterproof Rating: IPX4 Adjustable headband for universal fit This rechargeable LED headlamp combines brightness, comfort, and durability, making it an essential tool for work, outdoor projects, and emergencies.

RIOT 4-Channel 1.8K 1800W 2-Ohm Class D Full Range Amplifier w/ RGB LED Illumination

High Power Output: Delivers up to 1800W total (depending on impedance) to drive your audio system to new heights. Class D Efficiency: Ensures powerful performance with minimal heat generation, maximizing efficiency. RGB LED Lights: Customizable LED lighting to enhance the aesthetics of your car audio setup. 4-Channel Configuration: Perfect for powering multiple speakers or subwoofers for a balanced, high-performance sound. Adjustable Bass Boost: Fine-tune your bass to match your preferences with 0-12 dB of bass boost. Signal & Noise Performance: High signal-to-noise ratio ensures clean, clear sound. Durable & Compact Design: Built to last and designed to fit comfortably in tight spaces. Versatile Crossovers: Equipped with low-pass and Hi-Pass crossovers for precise sound control. B2 Audio RIOT 1800W 2-Ohm Class D 4-Channel Amplifier w/ RGB LED Illumination This Listing Includes: (1) B2 Audio RIOT Series 1800 Watt 4-Channel Amplifier with RGB LED Lights The B2 Audio RIOT Series 4-Channel Amplifier is designed for efficiency, versatility, and reliable performance in a compact footprint. Built with high-efficiency Class D circuitry, this amplifier delivers powerful output while keeping heat under control. With flexible crossover options, it provides precise system tuning for mids and highs. The integrated RGB LED lighting adds a visual upgrade with multiple patterns and colors, giving your installation a professional look. For best results, upgrading your stock electrical system is recommended to ensure stable power and consistent amplifier performance. Key Features Powerful multi-channel performance: 4 x 300W RMS at 4 ohms, 4 x 450W RMS at 2 ohms, or 2 x 900W RMS bridged at 4 ohms High-efficiency Class D circuitry for consistent output and reduced heat buildup Full crossover control with adjustable low-pass and high-pass filters (50 Hz to 5 KHz, 12 dB/oct) Integrated RGB LED illumination with multiple sound-activated lighting modes Smart protection system with power, protection, and clip indicators for safe operation Compact design for easier installation, measuring 13.82 x 4.92 x 2.24 inches 1-gauge power terminal with a 150A fuse rating for stable connections Specifications Continuous Output Power (RMS) @ 4 Ohm: 4 x 300W Continuous Output Power (RMS) @ 2 Ohm: 4 x 450W Continuous Output Power (RMS) @ 4 Ohm Bridged: 2 x 900W Circuit Configuration: HI-EF Class D Frequency Response: 10 Hz to 40 KHz (-3 dB) Signal to Noise Ratio: greater than 90 dB Input Sensitivity: 6 V to 0.4 V (RCA) High Level Input: 10 V to 0.8 V Crossover Circuit: 12 dB/oct Low Pass Crossover: 50 Hz to 5 KHz High Pass Crossover: 50 Hz to 5 KHz Power Terminal Gauge: 1 Gauge Operational Voltage: 10 V to 16 V Fuse Rating: 150 A Dimensions: Length: 13.82" Width: 4.92" Height: 2.24"

The KRAKEN 30K Watt 1-Ohm Monoblock Class D Full Bridge Amplifier

Insane Power: Experience the madness of 30,000 watts of raw power channeled onto a single PCB with a mono output, setting new standards in amplification. Mythical Powerhouse: The Kraken amplifies the myth of power, surpassing the capabilities of previous big amps and redefining the boundaries of amplifier performance. Robust In Size: The Kraken demands respect and requires robust electrical infrastructure to unleash its devastating power safely. Unparalleled Performance: With a frequency response of 10Hz to 200Hz and a signal-to-noise ratio of over 90dB, The Kraken delivers exceptional audio clarity and depth. Risky Adventure: Embark on a journey to experience the unrivaled power of The Kraken, but beware, entering this realm is not for the faint-hearted. B2 Audio THE KRAKEN 30K Watt 1-Ohm Monoblock Class D Full Bridge Amplifier This Listing includes: (1) 30,000 Watt Class D Monoblock Amplifier (1) Bass remote control W/ Clip LED Enter the realm of extreme amplification with The Kraken, our 30,000-watt Monoblock amplifier. This powerhouse of insanity channels unprecedented power onto a single PCB with a mono output, shattering previous notions of amplifier capabilities. With its mythical status likened to the Architeuthis, The Kraken stands as a predator in the world of amplification, ready to unleash its raw power upon the audio landscape. But beware, this is not a toy for the faint-hearted; entering the realm of The Kraken requires big boy electrical and a willingness to embrace the madness of its power. Scan QR Code For Manual ! Specifications: Total Watts: 30,000 RMS Power @ 4 ohm 9000 Watts RMS Power @ 2 ohm 16,000 Watts RMS Power @ 1 ohm 30,000 Watts Circuit Configuration: Class D Full Bridge Frequency response: 10hz ~ 200Hz signal to noise Ratio: >90dB Input Sensitivity: 5V ~0.2V Crossover Circuit: 12dB / Octave Low Pass Crossover: 40Hz ~ 180 Hz Subsonic Crossover: 15Hz ~ 50Hz Damping factor: >200 Power/Ground Terminal Gauge: 0 Ga Speaker Terminal Gauge: 8 Ga Fuse Rating: 2000A Measurements: Length: 35.71" / 907mm Width: 9.25" / 235mm height: 2.67" / 68mm

VATN Aquadust 800W 4CH 2-Ohm Waterproof Marine Power Sport Amplifier

MARINE-GRADE DURABILITY – Fully waterproof design with sealed cabling and control cover for extreme weather protection. HIGH-POWER PERFORMANCE – Delivers up to 800W RMS with stable 2-ohm output for clean, powerful sound on any terrain. COMPACT & VERSATILE – Slim profile fits stealth installs; features auto power-on, crossover control, and flexible input modes. TOTAL SOUND CONTROL – Fine-tune your audio with bass boost, high/low pass filters, and input gain for precision tuning. B2 Audio VATN Aquadust 800W 4CH 2-Ohm Waterproof Marine Power Sport Amplifier This Listing Includes: (1) B2 Audio 800 Watt Waterproof Marine Power Sport Amplifier VATN-AD-800.4 (1) AGU Fuse Holder w/ 80 Amp Fuse Born from the depths of Scandinavian engineering, the VATN Aquadust 800.4 is a marine-grade 4-channel amplifier that delivers relentless power and precision in the harshest environments. With up to 800 watts of RMS output, this compact powerhouse is built to fuel your sound system while you're tearing through open water. Designed specifically for marine and power sport applications, every connection is sealed with fully waterproof cabling, and the amplifier’s control panel is protected by a durable waterproof cover, ensuring your settings stay locked in and shielded from the elements. From its versatile crossover network and bass boost control to its auto power-on and high/low pass filters, the VATN-AD-800.4 gives you full command over your sound. With stable 2-ohm performance, flexible input modes, and a compact footprint, it’s ready for stealth installs without sacrificing output. The Aquadust 800.4 is your all-terrain audio weapon, built to play clean audio under harsh conditions. Features: Input Gain Control High Pass Filter Low Pass Filter Bass Boost Control Input Level Selector Input Mode Selector X-Over Control Auto Power On Power Status LED Power/Audio Output Wiring Harness IPX5 Rating Specifications: 4 ohm RMS Power: 120 W x 4 2 ohm RMS Power: 165 W x 4 / 200 W x 4 Bridged 4 ohm RMS Power: 430 W x 2 / 400 W x 2 Min. Speaker Impedance: 2 ohm Frequency Response: 20 Hz - 20 KHz S/N Ratio: > 82dB T.H.D: <1% / <3% Input Sensitivity 300 mV - 8 V Low Pass Frequency: 50 Hz - 250 Hz High Pass Frequency: 120 Hz - 3 KHz Bass Boost: 0 - 12 dB AGU Fuse: 80 A Operating Voltage: 9 - 16 V DC Product Dimensions: Length: 9.84" Width: 4.53" Height: 1.97" Weight: 3.7 lbs Packaging Dimensions: Length: 13.75" Width: 6.5" Height: 4.5" Weight: 4.4 lbs

ZERO "Osprey" 9K Watts 1-Ohm Monoblock Class-D Half Bridge Amplifier

9000W 1-Ohm Monoblock Car Amplifier – Deliver raw power and clean output with the B2 Audio ZERO Osprey 9K, a high-performance amp built for serious bass and SPL performance. Korean Class-D Half Bridge Design – Crafted with precision Korean engineering for maximum efficiency, stability, and performance across a wide voltage range. RMS Rated Power from 2200W to 9000W – Consistently powerful across 12V to 16V operation, pushing your subs with clean, undistorted bass every time. Advanced Crossover Tuning Options – Fine-tune your setup with 24dB/oct slope, low pass (35–250Hz), subsonic (10–50Hz), and input sensitivity from 5V–0.2V for total control. Built for Demanding Audio Setups – Heavy-duty 0 GA power/ground terminals, 800A fuse rating, and over 95dB S/N ratio make this amplifier a powerhouse for any competition or daily system. B2 Audio ZERO "Osprey" 9K Watts 1-Ohm Monoblock Class-D Half Bridge Amplifier This Listing Includes: (1) 9000W 1 ohm Class D Half bridge Amplifier Item Description Upgrade your car audio system with the B2 Audio OSPREY 9K Monoblock Amplifier, delivering an astounding 9000 watts of power at 1 ohm impedance. This Class D Half Bridge amplifier is engineered to provide exceptional performance while maintaining efficiency and reliability. With RMS power ratings ranging from 2200 to 9000 watts, it's capable of driving even the most demanding subwoofers with ease. Featuring adjustable low pass and subsonic crossovers, as well as precise input sensitivity control, it allows for fine-tuning to achieve the perfect sound. Crafted with Korean precision and quality, this amplifier is built to last and excel in any audio setup. Features RMS Power @ 1 Ohm (14.4V): 8500 Watts RMS Power @ 1 Ohm (16V): 9000 Watts RMS Power @ 4 Ohm: Up to 3500W depending on voltage Class-D Half Bridge Korean Board Design Frequency Response: 10Hz – 300Hz Signal-to-Noise Ratio: >95 dB Input Sensitivity: 0.2V – 5V Low Pass Filter: 35Hz – 250Hz Subsonic Filter: 10Hz – 50Hz Damping Factor: >400 0 Gauge Power/Ground Terminals 4 Gauge Speaker Terminals Fuse Rating: 800A Dimensions: 24.5" x 9.25" x 2.67" (622mm x 235mm x 68mm) Specifications: Total Watts: 9000 Watts 12V 95 dB Input Sensitivity: 5V ~0.2V Crossover Circuit: 24 dB / OCT Low Pass Crossover: 35 Hz ~ 250 Hz Subsonic Crossover: 10Hz ~ 50 Hz Damping factor: >400 Power/Ground Terminal Gauge: 0 Ga Speaker Terminal Gauge: 4 Ga Fuse Rating: 800A Measurements: Length: 24.5" / 622mm Width: 9.25" / 235mm height: 2.67" / 68mm

ZERO Series "Vegvisir" 15K Watt 1-Ohm Monoblock Class-D Half Bridge Amplifier

Massive Power Handling – Engineered to handle extreme output with 4000W RMS and 8000W peak power, the ZERO15 delivers earth-shaking bass for serious SPL competitors. Hand-Built Precision – Each ZERO15 is handcrafted in Denmark with meticulous attention to detail, ensuring top-tier quality and unmatched performance. Optimized Suspension System – Dual progressive spiders and a reinforced cone structure provide tight, controlled excursion and long-lasting durability. Triple Stack Motor Structure – Features a high-mass motor with 1" top plate and ultra-efficient cooling, giving you consistent power and output even under heavy load. Equipped with a massive 4" flat wound aluminum voice coil, reinforced surround, and custom-machined parts to handle brutal low-frequency punishment. B2 Audio ZERO "Vegvisir" 15K Watts 1-Ohm Monoblock Class-D Half Bridge Amplifier This Listing Includes: (1) 15000W 1-Ohm Class-D Half Bridge Amplifier The Vegvisir—a symbol of ancient guidance—captures the Viking spirit. Deeply rooted in Norse mythology, it was believed to help navigators through rough seas. Picture the North Sea, where Viking longships bravely cut through fog and storm. Sagas recount seafarers relying on the Vegvisir to navigate the treacherous North Atlantic. For every Viking navigator, it symbolized hope amidst chaos. Displayed as tattoos or amulets, this potent symbol represented not just direction but the unity of all journeys. The Zero 15 embodies this symbol, guiding your subwoofers with precision. With Zero 15, this symbolism integrates with advanced audio technology, ensuring every beat resonates with clarity. With a jaw-dropping 15,000 watts of power at 1 ohm, this Class-D Half Bridge Korean amplifier is the epitome of brute force and precision engineering. Whether you're a seasoned car audio enthusiast craving ear-splitting volume or a professional sound engineer seeking uncompromising performance, the B2 Audio ZERO delivers the thunderous bass and crystal-clear highs you demand. For optimal performance, ensure your system is equipped with a sufficient electrical supply. The amplifier operates at voltages between 9V and 17.5V, and a dedicated battery supply with a minimum of six AGM or lithium batteries is required. Operational efficiency depends on correct installation and maintenance, with protection mechanisms in place for voltage fluctuations, speaker overload, and short circuits. Using the amplifier below its minimum impedance or exceeding its thermal limits may cause permanent damage. Dominate the streets, the stage, or the stadium with unrivaled authority. It's time to unleash the beast within your sound system. Key Points: Engineered for high-efficiency performance with HI-EF Class-D circuitry. Advanced crossover controls for precise tuning, including low-pass and subsonic filters. Robust protection features to safeguard against overheating, short circuits, and improper voltage. Daisy chain functionality enables seamless expansion for multiple amplifier setups. High-quality components ensure durability and consistent power delivery for demanding applications. Factory Rated Power (Official USA Dyno ratings will be released soon): RMS Power @ 4 ohm: 5000 Watts RMS Power @ 2 ohm: 8500 Watts RMS Power @ 1 ohm: 15000 Watts Specifications: Circuit Configuration: HI-EF Class-D Frequency Response: 10 Hz – 300 Hz Signal to Noise Ratio: >95 dB Input Sensitivity: 5V - 0.2V Crossover Circuit: 24 dB / OCT Low Pass Crossover: 35 Hz - 250 Hz Subsonic Crossover: 10 Hz - 50 Hz Phase Adjustment: 0 ~ 180 Damping Factor: >400 Power Terminal Gauge: 4 x 0 GA Fuse Rating: 1200A Measurements: Length: 39.25" / 996.95 mm Width: 12.4" / 315 mm Height: 2.95" / 75 mm

ZERO Series "Yggdrasil" 6K Watt 1-Ohm Monoblock Class-D Half Bridge Amplifier

6000 Watt Monoblock Amplifier for Car Audio Systems – Push serious power with the B2 Audio ZERO “Yggdrasil,” a competition-grade Class-D amp built to deliver true 6K RMS at 1 ohm. Ideal for high-output bass setups. ACCU8 Click-Pot Crossovers with Clip Indicator – Dial in your system with 41 detented tuning points and a precision clip light that helps you set gain and crossovers without guessing—no extra tools required. Triple 0 Gauge Power & Ground Inputs – Designed for elite builds, this amp features three oversized 0 GA connections on each side for cleaner installs, superior current flow, and reduced voltage drop at peak load. High-Efficiency Half-Bridge Design with 8 Toroids – Boost system performance with a compact chassis and custom-engineered toroidal transformers for improved power delivery, thermal management, and reliability. Daisy Chain Amplifier System with Master/Slave Sync – Expand your build with the Yggdrasil’s daisy-chainable design. Run dual amps in strap mode or link multiple amps together for synchronized bass control. B2 Audio ZERO "Yggdrasil" 6K Watts 1-Ohm Monoblock Class-D Half Bridge Amplifier This listing includes: (1) B2 Audio Zero 6 Monoblock Amplifier (1) Set of Hardware Item Description Yggdrasil, the legendary World Tree of Norse mythology, connects all realms with unmatched strength and precision. Inspired by this symbol of power and unity, the Zero6 - Yggdrasil amplifier is designed to be the cornerstone of your audio system, effortlessly driving any B2 Audio subwoofer with authority. Most amplifiers up to 7kW rely on dual oversized 0 GA inputs for power and ground—but we went further. The Zero6 features triple positive and triple ground inputs (all oversized 0 GA), delivering unrivaled connectivity, cleaner installs, and maximum power transfer. Compared to previous designs, the Zero6 has been refined with a Simple Triples layout, streamlining the internal architecture without sacrificing performance. Eight precision-wound toroids in the power supply boost efficiency and output, while a 15,000 uF capacitance bank ensures tight, responsive dynamics. The compact design shaves nearly 4 inches (10 cm) off its predecessor’s length, making the Zero6 as space-conscious as it is powerful. Fine-tune your system with the ACCU8, which removes the guesswork from crossovers. With 41 click pots mapped to precise frequencies and a highly accurate clip indicator, you have full command over your signal path. The Zero6 also introduces master/slave daisy chain functionality, letting you connect two—or virtually unlimited—amplifiers in series while controlling everything from a single master unit. This innovation gives you unprecedented flexibility for multi-amplifier setups. Features True 6,000W RMS @ 1 Ohm - Rated for real-world performance Triple 0 GA Power & Ground Inputs - For max current and clean installs ACCU8 Crossover System - 41 - click pots for perfect tuning Clip Indicator: Dead-on accurate signal monitoring Toroid Power Supply - Eight custom-wound cores for boosted efficiency Compact Housing - 4" shorter than the ZERO.7 with more power Master/Slave Daisy Chain - Strap or link unlimited amps with full control Specifications: Factory Rated Power (Official USA Dyno ratings will be released soon): Power @ 4 Ohm 14.4v: 2100 Watts Power @ 2 ohm 14.4v: 3800 Watts Power @ 1 ohm 14.4v: 6000 Watts Power @ 0.5 Ohm 13.51v (burst): 9200 Watts Frequency Response: 10 Hz - 300 Hz Signal to Noise Ratio: >95 dB Input Sensitivity: 5 V - 0.2 V Crossover Slope: 24 dB / Oct Low Pass Crossover: 35 Hz - 250 Hz Subsonic Crossover: 10 Hz - 50 Hz Phase: 0 - 180 Degrees Damping Factor: >400 Power Terminal Gauge: 0 GA x 3 Speaker Terminal Gauge: 4 GA Fuse Rating: 500 A Operational Voltage: 9 V - 17.5 V Dimensions: Length: 21.64" (545mm) Width: 8.7" (220mm) Height: 2.55" (65mm) Zero6 - Yggdrasil: Nordic-inspired power, precision, and control—your audio system’s World Tree.

ZERO Series 12K Watt 1-Ohm Monoblock Class-D Half Bridge Amplifier

B2 Audio ZERO 12K Watts 1-Ohm Monoblock Class-D Half Bridge Korean Amplifier This Listing Includes: (1) 12500W 1-Ohm Class-D Half Bridge Amplifier (1) 2-Year Product Repair CPS Warranty (Digital, Learn More ) Prepare to dominate the audio landscape with the B2 Audio ZERO 12K Monoblock Amplifier, a masterpiece of engineering and power. Delivering an earth-shaking 12,000 watts of RMS power at 1 ohm, this amplifier is designed for enthusiasts and professionals who demand nothing less than perfection in their car audio systems. Built with Class-D Half Bridge Korean technology, the ZERO 12K combines raw power with precision, producing thunderous bass and immaculate clarity. Whether you're competing in audio competitions or crafting the ultimate personal sound experience, the ZERO 12K ensures unmatched performance and reliability. This amplifier isn't just about power; it's a symbol of excellence. Featuring the Valknut emblem, a Norse symbol of strength and victory reserved for B2 Audio's elite products, the ZERO 12K pays homage to the ultimate champions. With its robust build and cutting-edge technology, this amplifier takes your sound system to new heights. Features 12,500 Watts RMS @ 1 Ohm (14.4V) - Delivers thunderous, competition-grade output with exceptional clarity 20,000W Dynamic Burst Power @ 12.5V - Built for SPL bursts and music peaks with insane dynamic response Class-D Half Bridge Korean Circuitry - High-efficiency board design with stable performance under extreme loads Valknut Series Symbolism - Norse-inspired emblem represents strength, precision, and elite craftsmanship Multi-Voltage Power Ratings - Consistent power across 12.6V to 16V operation; performance scales with voltage Wide Frequency Response (10Hz - 300Hz) - Handles deep lows and punchy mid-bass with accurate reproduction 24 dB/Oct Crossover Circuit - Fully adjustable low pass and subsonic filters for total sound control Phase Shift Control (0-180°) - Optimize subwoofer alignment and bass directionality Signal-to-Noise Ratio >95 dB - Ultra-clean signal for professional-grade performance Oversized Power Terminals (0 GA) & 4 GA Speaker Output - Built for high current flow and secure connections 1000A Fuse Rating - Supports extreme output safely Heavy-Duty Chassis - Rugged design that handles heat, vibration, and high-amperage installs Large Format Footprint - Measures 31.5" x 12.4"x 2.95" for secure rack or trunk-mount applications Wattage (Measured @ 95 dB Input Sensitivity: 5V - 0.2V Crossover Circuit: 24 dB / OCT Low Pass Crossover: 35 Hz - 250 KHz Subsonic Crossover: 10 Hz - 50 Hz Phase: 0 - 180 Damping factor: > 400 Power Terminal Gauge: 0 GA Speaker Terminal Gauge: 4 Ga Fuse Rating: 1000A Measurements: Length: 31.5" / 80 cm Width: 12.4" / 31.5 cm height: 2.95" / 7.5 cm

ZK-1001B 100W Mono Channel Bluetooth Amplifier Board for B2 RC2 AUX/USB Inputs

Inputs: Supports Bluetooth, USB, and 3.5mm AUX, providing multiple ways to connect devices like phones, laptops, and music players. Mono Channel Output: 100W power for clear, high-quality sound performance. TWS Pairing Functionality: Easily pair two amplifier boards to create a true stereo experience, separating left and right audio channels wirelessly. Compact and Durable Design: Perfect for DIY audio projects with reliable performance and easy installation. Power & Limitations: Capable of running two RC2 subwoofers; however, it may clip under heavy bass due to the lack of bass and treble adjustments. ZK-1001B 100W Mono Channel Bluetooth Amplifier Board for B2 RC2 AUX/USB Inputs This Listing Includes: (1) Daakro ZK-1001B Bluetooth Amplifier Board, 100W Mono Channel Amp, DC 24V, TWS Pairing, Multi-Audio Inputs, Knob Controls for DIY Wireless Speakers The Daakro ZK-1001B Bluetooth Amplifier Board is a powerful and versatile audio solution designed for DIY home audio projects. Delivering 100W of mono channel output, this amplifier board supports multiple audio inputs, including Bluetooth, USB, and AUX, allowing seamless connectivity with various devices. This Bluetooth power amplifier board uses a TDA3116D2 high-fidelity power amplifier chips, and the power output of a single chip can reach 100W. The large heat sink can quickly release heat to ensure that the chip can stably output large-scale power and avoid damage to the chip. Make wiring more convenient without damaging the wires. 5.5mm * 2.1mm DC interface, suitable for most notebook power adapters. Its compact design, combined with password-free operation and True Wireless Stereo (TWS) pairing functionality, makes it an ideal choice for creating high-quality wireless speaker systems. Capable of running two RC2 subwoofers; however, it may clip under heavy bass due to the lack of bass and treble adjustments. Key Features: High Power Output: 100W mono channel amplifier for robust sound performance.

ZK-1001B Bluetooth 100W Mono Channel Amplifier Board for B2 RC2 AUX/USB Inputs

Inputs: Supports Bluetooth, USB, and 3.5mm AUX, providing multiple ways to connect devices like phones, laptops, and music players. Mono Channel Output: 100W power for clear, high-quality sound performance. TWS Pairing Functionality: Easily pair two amplifier boards to create a true stereo experience, separating left and right audio channels wirelessly. Compact and Durable Design: Perfect for DIY audio projects with reliable performance and easy installation. Power & Limitations: Capable of running two RC2 subwoofers; however, it may clip under heavy bass due to the lack of bass and treble adjustments. ZK-1001B Bluetooth 100W Mono Channel Amplifier Board w/DC 7-24V, AUX/USB Inputs This Listing Includes: (1) Daakro ZK-1001B Bluetooth Amplifier Board, 100W Mono Channel Amp, DC 24V, TWS Pairing, Multi-Audio Inputs, Knob Controls for DIY Wireless Speakers The Daakro ZK-1001B Bluetooth Amplifier Board is a powerful and versatile audio solution designed for DIY home audio projects. Delivering 100W of mono channel output, this amplifier board supports multiple audio inputs, including Bluetooth, USB, and AUX, allowing seamless connectivity with various devices. This Bluetooth power amplifier board uses a TDA3116D2 high-fidelity power amplifier chips, and the power output of a single chip can reach 100W. The large heat sink can quickly release heat to ensure that the chip can stably output large-scale power and avoid damage to the chip. Make wiring more convenient without damaging the wires. 5.5mm * 2.1mm DC interface, suitable for most notebook power adapters. Its compact design, combined with password-free operation and True Wireless Stereo (TWS) pairing functionality, makes it an ideal choice for creating high-quality wireless speaker systems. Capable of running two RC2 subwoofers; however, it may clip under heavy bass due to the lack of bass and treble adjustments. Key Features: High Power Output: 100W mono channel amplifier for robust sound performance. Multiple Audio Inputs: Supports Bluetooth, USB flash drive, AUX, and USB sound card inputs for versatile connectivity. TWS Pairing Functionality: Easily pair two amplifier boards to create a true stereo experience, separating left and right audio channels wirelessly. User-Friendly Knob Controls: Multi-functional knob for volume adjustment, play/pause, track switching, and power control, enhancing ease of use. Compact and Durable Design: Perfect for DIY audio projects with reliable performance and easy installation. Indicator Lights: WORK and TWS indicators provide clear status updates for hassle-free operation. Multi-function Knob Controlled Specifications: Number of Channels: 1 Package Type: Box Output Power: 100 Watts Voltage: 7 to 24 Volts (DC) Bluetooth Version: 5.0 Supported Audio Inputs: Bluetooth, AUX, USB Flash Drive, USB Sound Card Product Dimensions: Compact size for easy integration into DIY setups Weight: Lightweight and portable design Class: D TAP3116D2 Chip Large Heat Sink Power Outputs: 12v @ 4 Ohm: 30W 12v @ 8 Ohm: 10W 15v @ 4 Ohm: 50W 15v @ 8 Ohm: 20W 19v @ 4 Ohm: 70W 19v @ 8 Ohm: 30W 24v @ 4 Ohm: 100W 24v @ 8 ohm: 50W Please note: There must be enough voltage and current input to have enough power output. Higher the voltage and current input, higher the power will be. Under the same conditions, the smaller the speaker impedance, the greater the power obtained. Applications: DIY wireless speaker systems Home audio enhancements Office audio setups Custom AV solutions Dimensions: Length: 3.35 in Width: 1.80 in Height: 0.8 in Weight: 1.8 oz The power switch on the board is a standby switch. After the switch is turned off, the machine is in a low-power standby state. To completely turn off the power or unplug it for a long time, you can unplug the DC plug on the machine.

ZK-1002T 200 Watt 2 Channel Bluetooth Amplifier Board for B2 RC2 AUX/BT Inputs

Dual TPA3116D2 HiFi Chips: Powered by class D technology with PurePath, offering ultra-low distortion and high fidelity sound. 100W+100W Power Output: Delivers dynamic and powerful stereo sound for a 2.0-channel configuration. Treble & Bass Control: Customize audio settings for enhanced sound quality across music, movies, and games. Bluetooth 5.0 & AUX Inputs: Supports wireless and wired connections, compatible with phones, TVs, laptops, and more. Lightweight, portable, and compact design for DIY integration ZK-1002T 200 Watt 2 Channel Bluetooth Amplifier Board for B2 RC2 AUX/BT Inputs This Listing Includes: (1) ZK-1002T Audio Amp Board, 100W+100W 2.0 Channel Bluetooth Amplifier Board with Treble & Bass Control, DC 12-24V, BT & AUX Inputs, Amp Board The ZK-1002T Audio Amplifier Board is powered by the high-performance TPA3116D2 HiFi chipset, delivering 100W+100W output for an immersive 2.0-channel stereo experience. Supporting Bluetooth 5.0 and AUX inputs, it offers seamless wireless connectivity or traditional wired compatibility. Treble and bass controls allow fine-tuning for optimal sound quality, while its broad DC 12-24V input range ensures compatibility with various power supplies. Designed with class D technology, this amp is highly efficient, minimizing heat while maximizing sound fidelity. Its built-in protection mechanisms safeguard against over-voltage, under-voltage, short circuits, and overheating. Suitable for 4-8© passive speakers, this amplifier board is perfect for DIY wireless speaker projects, home theater systems, and portable audio setups. The included large heat sink and high-grade wiring terminals enhance durability and ease of use. Capable of running two RC2 subwoofers, with bass and treble adjustments. Key Features: Wide Voltage Compatibility: Operates on DC 12-24V, ideal for various power adapters, including 12V, 19V, or 24V. Comprehensive Protection Features: Over-voltage, under-voltage, over-temperature, reve

ZK-1002T Bluetooth 200 Watt 2 Channel Amplifier Board for B2 RC2 AUX/BT Inputs

Dual TPA3116D2 HiFi Chips: Powered by class D technology with PurePath, offering ultra-low distortion and high fidelity sound. 100W+100W Power Output: Delivers dynamic and powerful stereo sound for a 2.0-channel configuration. Treble & Bass Control: Customize audio settings for enhanced sound quality across music, movies, and games. Bluetooth 5.0 & AUX Inputs: Supports wireless and wired connections, compatible with phones, TVs, laptops, and more. Lightweight, portable, and compact design for DIY integration ZK-1002T Bluetooth 200 Watt 2 Channel Amplifier Board for B2 RC2 AUX/BT Inputs This Listing Includes: (1) ZK-1002T Audio Amp Board, 100W+100W 2.0 Channel Bluetooth Amplifier Board with Treble & Bass Control, DC 12-24V, BT & AUX Inputs, Amp Board The ZK-1002T Audio Amplifier Board is powered by the high-performance TPA3116D2 HiFi chipset, delivering 100W+100W output for an immersive 2.0-channel stereo experience. Supporting Bluetooth 5.0 and AUX inputs, it offers seamless wireless connectivity or traditional wired compatibility. Treble and bass controls allow fine-tuning for optimal sound quality, while its broad DC 12-24V input range ensures compatibility with various power supplies. Designed with class D technology, this amp is highly efficient, minimizing heat while maximizing sound fidelity. Its built-in protection mechanisms safeguard against over-voltage, under-voltage, short circuits, and overheating. Suitable for 4-8© passive speakers, this amplifier board is perfect for DIY wireless speaker projects, home theater systems, and portable audio setups. The included large heat sink and high-grade wiring terminals enhance durability and ease of use. Capable of running two RC2 subwoofers, with bass and treble adjustments. Key Features: Wide Voltage Compatibility: Operates on DC 12-24V, ideal for various power adapters, including 12V, 19V, or 24V. Comprehensive Protection Features: Over-voltage, under-voltage, over-temperature, reverse connection, and short-circuit protection. Large Heat Sink: Efficiently dissipates heat to ensure stable operation and prolong chip life. High-Grade Wiring Terminals: Simplifies installation without damaging cables, supporting secure and reliable connections. Specifications: Power Amplifier Chip: TPA3116D2 Input Voltage: DC 12V-24V Maximum Power Output: 100W+100W Channel Type: 2.0 Channel Input Methods: Bluetooth 5.0 & AUX Output Impedance: 4-8 ohms THD (Total Harmonic Distortion): 0.40% SNR (Signal-to-Noise Ratio): 75dB Compatible Speakers: Passive speakers, 20-200W, 4-8 Ohms Bluetooth Range: Up to 15m Power Outputs: 12v @ 4 ohm: 30W x 2 12v @ 8 ohm: 10W x 2 15v @ 4 ohm: 50W x 2 15v @ 8 ohm: 20W x 2 19v @ 4 ohm: 70w x 2 19v @ 8 ohm: 30w x 2 24v @ 4 ohm: 100w x 2 24v @ 8 ohm: 50w x 2 Please note: There must be enough voltage and current input to have enough power output. The higher the voltage and current input, the higher the power will be. Under the same conditions, the smaller the speaker impedance, the greater the power obtained. The power switch on the board is a standby switch. After the switch is turned off, the machine is in a low-power standby state. To completely turn off the power or unplug it for a long time, you can unplug the DC plug on the machine.