Audio Control Amplifiers

Elevate your audio experience with AudioControl’s Altitude Amplifier Series, designed from the ground up to be sleek and modern with a minimalist aesthetic. The anodized matte grey aluminum chassis provides superior thermal dissipation. Performing at the top of their class, these amplifiers offer robust power and exceptional quality. Altitude amplifiers feature Valet Mode, which safeguards your system from unintended damage by limiting the maximum volume to 25% when activated. They are also compatible with start-stop systems and electric vehicles, ensuring outstanding performance in any vehicle. Pair Altitude amplifiers with AudioControl’s PNW speakers and Space or Spike subwoofers. This combination creates asoundscape engineered to deliver the pure, uninterrupted power that AudioControl is known for. Spike Mode allows you to connect three 4Ω subwoofers at 1.33Ω, unleashing even more power from your Altitude Series amplifier, designed to run cool at maximum output for extended periods of time. With the ParaBASS control knobs you can fine-tune your bass for the ultimate audio experience. Customize your sound and feel the difference. Your bass, your way. The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency. Designed with Advanced HEXFET® Power MOSFETs from International Rectifier that utilize advanced processing techniques to achieve extremely low on-resistance and reliable fast switching speed. Premium Toroidal Transformer for optimal electrical efficiency and minimal signal distortion. Premium Low ESR capacitors for minimal power loss and reduced internal heating. Precision metal potentiometers for precise tuning and sturdy construction Features 500V Class X2 capacitors with self-healing properties for high-frequency, high-current protection, ensuring low-loss AC peak surge and MOSFET protection. High-efficiency Ferrite Core Inductor power output filters provide low curren

Elevate your audio experience with AudioControl’s Altitude Amplifier Series, designed from the ground up to be sleek and modern with a minimalist aesthetic. The anodized matte grey aluminum chassis provides superior thermal dissipation. Performing at the top of their class, these amplifiers offer robust power and exceptional quality. Altitude amplifiers feature Valet Mode, which safeguards your system from unintended damage by limiting the maximum volume to 25% when activated. They are also compatible with start-stop systems and electric vehicles, ensuring outstanding performance in any vehicle. Pair Altitude amplifiers with AudioControl’s PNW speakers and Space or Spike subwoofers. This combination creates asoundscape engineered to deliver the pure, uninterrupted power that AudioControl is known for. The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency. Designed with Advanced HEXFET® Power MOSFETs from International Rectifier that utilize advanced processing techniques to achieve extremely low on-resistance and reliable fast switching speed. Premium Toroidal Transformer for optimal electrical efficiency and minimal signal distortion. Premium Low ESR capacitors for minimal power loss and reduced internal heating. Precision metal potentiometers for precise tuning and sturdy construction Features 500V Class X2 capacitors with self-healing properties for high-frequency, high-current protection, ensuring low-loss AC peak surge and MOSFET protection. High-efficiency Ferrite Core Inductor power output filters provide low current eddy losses over frequencies with high permeability. High-performance class D intelligent driver IC with PWM modulator and protection with HEXFET Power MOSFET for abundant power and high efficiency. FEATURES High/Low Input Modes GTO™ Signal Sense Linkwitz-Riley Crossovers Start-Stop Compliant High Power Output in a Sleek Chassis Valet Mode Option Optiona

Elevate your audio experience with AudioControl’s Altitude Amplifier Series, designed from the ground up to be sleek and modern with a minimalist aesthetic. The anodized matte grey aluminum chassis provides superior thermal dissipation. Performing at the top of their class, these amplifiers offer robust power and exceptional quality. Altitude amplifiers feature Valet Mode, which safeguards your system from unintended damage by limiting the maximum volume to 25% when activated. They are also compatible with start-stop systems and electric vehicles, ensuring outstanding performance in any vehicle. Pair Altitude amplifiers with AudioControl’s PNW speakers and Space or Spike subwoofers. This combination creates asoundscape engineered to deliver the pure, uninterrupted power that AudioControl is known for. Spike Mode allows you to connect three 4Ω subwoofers at 1.33Ω, unleashing even more power from your Altitude Series amplifier, designed to run cool at maximum output for extended periods of time. With the ParaBASS control knobs you can fine-tune your bass for the ultimate audio experience. Customize your sound and feel the difference. Your bass, your way. The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency. Designed with Advanced HEXFET® Power MOSFETs from International Rectifier that utilize advanced processing techniques to achieve extremely low on-resistance and reliable fast switching speed. Premium Toroidal Transformer for optimal electrical efficiency and minimal signal distortion. Premium Low ESR capacitors for minimal power loss and reduced internal heating. Precision metal potentiometers for precise tuning and sturdy construction Features 500V Class X2 capacitors with self-healing properties for high-frequency, high-current protection, ensuring low-loss AC peak surge and MOSFET protection. High-efficiency Ferrite Core Inductor power output filters provide low curren

ACM series amplifiers by AudioControl are the perfect blend of power and features for car audio systems from mild to wild. Compact size, high power and the ability to help integrate with factory stereo systems are features that assure “Making Good Sound Great” can happen in any installation. Reversible cover plates allow flexible mounting options when paired with AudioControl DM Series Processors or when using multiple ACM series amplifiers in confined spaces. Once again AudioControl comes to the rescue combining features and benefits needed to assure audio euphoria in an automotive setting. FEATURES 2 x 150 watts @ 2 ohms 2 x 75 watts @ 4 ohms 300 watts @ 4 ohms bridged GTOTM Signal Sense Active speaker-level inputs for OEM integration RCA Line Inputs Linkwitz-Riley Crossover Reversible Cover Plate Bulletproof 5 year warranty (when installed by an authorized AudioControl dealer) SPECIFICATIONS INPUTS Preamp Inputs: 2 Balanced Preamp Input Voltage Range: 500 mV – 6 Vrms Speaker Level Inputs: 2 Speaker Level Input Voltage Range: 3 V – 40 Vrms OUTPUTS Rated Continuous (RMS) Power at 14.4V: 4 Ω – 75 W x 2 RMS 2 Ω – 150 W x 2 RMS Bridged 4 Ω – 300 W RMS PERFORMANCE Frequency Response: 10 Hz – 22 kHz Signal to Noise: 102 dBA, Ref 50 W @ 4 Ohm THD+N: < 0.01% Power / Ground Wire Gauge: 10 to 4 AWG wire Fuse Rating: 1 x 30 A Crossover: 12 dB/octave Linkwitz-Riley, 80 Hz, 120 Hz, Bypass PFM Subsonic Filter: 32 Hz WEIGHT & DIMENSIONS Dimensions: 9.4″W x 3.0″D x 1.75″H Weight: 2.1 lbs. (0.95 kg) IN THE BOX: ACM-2.300, Speaker Connectors, Fuse, Manual, Warranty

The ACX-3.2 all-weather sound processor is a high-output pre-amp, for all systems on-road, off-road, or off-shore. The ACX-3.2 can serve as the main control unit in your audio system allowing you to control the output to all of your amplifiers. It features a 4-band graphic equalizer that can be used to tweak your system, depending upon your mood or music selection. The built-in crossover gives you the ability to separate high and low frequencies, and send them to the appropriate amplifier and speakers, maximizing the performance of your system. Adding an ACX-3.2 to your system gives you the assurance that your system can play longer, louder, and cleaner with less distortion. The low-profile ACX-3.2 takes your experience to another level by combining all of its audio features with a PA microphone!If you are out on your boat ACX-3.2 allows you to play music and communicate with the person wakeboarding or tubing behind you. Own a food truck? This is great for playing music inside for the cooks, outside for the patrons, and allowing you the ability to call out an order number for a waiting customer. The ACX-3.2 is a game changer, by offering a quality real-world solution for all of those unique installation needs. This multi-functional piece is part of our all-weather line-up making it the perfect solution for any adventure. FEATURES 4-Band Stereo Graphic EQ Parabass® Low-Frequency Contouring Variable 24 Db/Octave Linkwitz-Riley Crossover Front, Rear, and Subwoofer Outputs Master Volume, Fader, and Sub-Level Control Parabass® Bass Control High-Gain Input Stage Line Driver: 13-Volts Peak Output Dash or Console-Mountable Included Paging Microphone Selectable Illumination (red or blue) SPECIFICATIONS INPUTS Preamp Inputs: 1 (2 channels) Input Gain: 0-20 dB Input Impedance: 20 kΩ OUTPUTS Preamp Outputs: 6 Maximum Output Level: 7.5 Vrms / 9.5 V Peak Output Impedance: 150 Ω PERFORMANCE Frequency Response: 20Hz-20kHz ±.01dB Total Harmonic Distortion: 0.03% Signal to Noise: 123

AudioControl’s ACX-300.1 all-weather monoblock subwoofer amplifier delivers honest power levels to the sound system in your boat, utv, motorcycle, and more. The ACX-300.1 will ensure your open-air speakers and subwoofers deliver plenty of punch and clarity, all day long. Installer-friendly, heavy gauge quick-connect wiring makes installation quick and painless, making the ACX-300.1 all-weather monoblock amplifier the perfect solution for your next adventure. FEATURES 1 x 300 watts @ 2 ohms 1 x 175 watts @ 4 ohms IPX6 Rated AccuBASS® bass management GTOTM Signal Sense High and low input modes Linkwitz-Riley Crossover Optional ACR-1 dash remote control Bulletproof 5 year warranty (when installed by an authorized AudioControl dealer) SPECIFICATIONS INPUTS Preamp/Speaker Level Inputs: 2 Input Voltage Low: 500 mV – 6 Vrms Input Voltage Range High: 1 Vrms – 12 Vrms OUTPUTS Rated Continuous (RMS) Power at 14.4V: 4 Ω – 175 W x 1 RMS 2 Ω – 300 W x 1 RMS PERFORMANCE Frequency Response: 26 Hz – 22 kHz Signal to Noise: 102 dBA, Ref 50 W @ 4 Ohm THD+N: < 0.05% Crossover: 12 dB/octave Linkwitz-Riley, 80 Hz, 120 Hz, Bypass IP Rating: IPX6 GENERAL Recommended Fuse Rating: 30A WEIGHT & DIMENSIONS Dimensions: 9.0″W x 3.875″D x 2.25″H Weight: 7.2 lbs. (3.3 kg) IN THE BOX: ACX-300.1, Manual, Warranty

AudioControl’s ACX-300.2 all-weather amplifier delivers honest power levels to the sound system in your boat, utv, motorcycle, and more. The ACX-300.2 will ensure your open-air speakers and subwoofers deliver plenty of punch and clarity, all day long. Installer-friendly, heavy gauge quick-connect wiring makes installation quick and painless, making the ACX-300.2 all-weather amplifier the perfect solution for your next adventure. FEATURES 2 x 75 watts @ 4 ohms 2 x 150 watts @ 2 ohms 1 x 300 watts @ 4 ohms bridged IPX6 Rated GTOTM Signal Sense High and low input modes Linkwitz-Riley Crossover Bulletproof 5 year warranty (when installed by an authorized AudioControl dealer) SPECIFICATIONS INPUTS Preamp/Speaker Level Inputs: 2 Input Voltage Low: 500 mV – 6 Vrms Input Voltage Range High: 1 Vrms – 12 Vrms OUTPUTS Rated Continuous (RMS) Power at 14.4V: 4 Ω – 75 W x 2 2 Ω – 150 W x 2 Bridged 4 Ω – 300 W x 1 PERFORMANCE Frequency Response: 26 Hz – 22 kHz Signal to Noise: 102 dBA, Ref 50 W @ 4 Ohm THD+N: < 0.05% Crossover: 12 dB/octave Linkwitz-Riley, 80 Hz, 120 Hz, Bypass IP Rating: IPX6 GENERAL Recommended Fuse Rating: 30A WEIGHT & DIMENSIONS Dimensions: 8.89″W x 3.86″D x 2.36″H Weight: 3.15 lbs. (1.43 kg) IN THE BOX: ACX-300.2, Manual, Warranty

AudioControl’s ACX-300.4 all-weather amplifier delivers honest power levels to the sound system in your boat, utv, motorcycle, and more. for a two or four channel system, the ACX-300.4 will ensure your open-air speakers deliver plenty of punch and clarity, all day long. Installer-friendly, heavy gauge quick-connect wiring makes installation quick and painless, making the ACX-300.4 all-weather amplifier the perfect solution for your next adventure. FEATURES 4 x 75 watts @ 2 ohms 4 x 50 watts @ 4 ohms 150 watts @ 4 ohms bridged IPX6 Rated GTOTM Signal Sense High and low input modes 4 and 2 channel input modes Linkwitz-Riley Crossover Bulletproof 5 year warranty (when installed by an authorized AudioControl dealer) SPECIFICATIONS INPUTS Preamp/Speaker Level Inputs: 4 Input Voltage Low: 500 mV – 6 Vrms Input Voltage Range High: 1 Vrms – 12 Vrms OUTPUTS Rated Continuous (RMS) Power at 14.4V: 4 Ω – 50 W x 4 RMS 2 Ω – 75 W x 4 RMS Bridged 4 Ω – 150 W RMS PERFORMANCE Frequency Response: 26 Hz – 22 kHz Signal to Noise: 106 dBA, Ref 50 W @ 4 Ohm THD+N: < 0.2% Crossover: 12 dB/octave Linkwitz-Riley, 80 Hz, 120 Hz, Bypass IP Rating: IPX6 GENERAL Recommended Fuse Rating: 30A WEIGHT & DIMENSIONS Dimensions: 9.0″W x 3.875″D x 2.25″H Weight: 7.2 lbs. (3.3 kg) IN THE BOX: ACX-300.4, Manual, Warranty

AudioControl’s ACX-600.1 all-weather monoblock amplifier delivers honest power levels to the sound system in your boat, utv, motorcycle, and more. The ACX-600.1 will ensure your open-air speakers and subwoofers deliver plenty of punch and clarity, all day long. Installer-friendly, heavy gauge quick-connect wiring makes installation quick and painless, making the ACX-600.1 all-weather monoblock amplifier the perfect solution for your next adventure. FEATURES 1 x 350 watts @ 4 Ohms 1 x 600 Watts @ 2 Ohms IPX6 Rated GTOTM Signal Sense Optional wired ACR-1 Remote Control for Output Level High and low input modes Linkwitz-Riley Crossover Bulletproof 5 year warranty (when installed by an authorized AudioControl dealer) SPECIFICATIONS INPUTS Preamp/Speaker Level Inputs: 2 Input Voltage Low: 500 mV – 6 Vrms Input Voltage Range High: 1 Vrms – 12 Vrms OUTPUTS Rated Continuous (RMS) Power at 14.4V: 4 Ω – 350 W x 1 2 Ω – 600 W x 1 PERFORMANCE Frequency Response: 26 Hz – 22 kHz Signal to Noise: 102 dBA, Ref 50 W @ 4 Ohm THD+N: < 0.05% Crossover: 12 dB/octave Linkwitz-Riley, 80 Hz, 120 Hz, Bypass IP Rating: IPX6 GENERAL Recommended Fuse Rating: 60A WEIGHT & DIMENSIONS Dimensions: 8.89″W x 5.31″D x 2.36″H Weight: 4.45 lbs. (2.02 kg) IN THE BOX: ACX-600.1, Manual, Warranty

AudioControl’s ACX-650.5 all-weather amplifier delivers honest power levels to the sound system in your boat, utv, motorcycle, and more. The ACX-650.5 will ensure your open-air speakers deliver plenty of punch and clarity, all day long. Installer-friendly, heavy gauge quick-connect wiring makes installation quick and painless, making the ACX-650.5 all-weather amplifier the perfect solution for your next adventure. FEATURES 4 x 50 Watts @ 4 Ohms, 1 x 200 Watts @ 4 Ohms 4 x 75 Watts @ 2 Ohms, 1 x 350 Watts @ 2 Ohms 2 x 150 Watts @ 4 Ohms, Bridged Mono IPX6 Rated AccuBASS® bass management GTOTM Signal Sense High and low input modes Linkwitz-Riley Crossover Bulletproof 5 year warranty (when installed by an authorized AudioControl dealer) SPECIFICATIONS INPUTS Preamp/Speaker Level Inputs: 6 Input Voltage Low: 500 mV – 6 Vrms Input Voltage Range High: 1 Vrms – 12 Vrms OUTPUTS Rated Continuous (RMS) Power at 14.4V: 4 Ω – 50 W x 4 + 200 W x 1 2 Ω – 75 W x 4 + 350 W x 1 Bridged 4 Ω – 150 W x 2 PERFORMANCE Frequency Response: 26 Hz – 22 kHz Signal to Noise: 102 dBA, Ref 50 W @ 4 Ohm THD+N: < 0.05% Crossover: 12 dB/octave Linkwitz-Riley, 80 Hz, 120 Hz, Bypass IP Rating: IPX6 GENERAL Recommended Fuse Rating: 30A WEIGHT & DIMENSIONS Dimensions: 11.97″W x 5.31″D x 2.36″H Weight: 5.8 lbs. (2.63 kg) IN THE BOX: ACX-650.5, Manual, Warranty

AudioControl has paired our award-winning amplifier technology with our powerful Matrix DSP into the D-4.800. This single-unit solution provides unprecedented power and tuning flexibility when you require audio perfection from your factory or aftermarket sound system.The D-4.800 features active speaker level inputs, line-level inputs, and outputs plus, using AudioControl’s DM Smart DSP app gives you complete control over all features including 30 bands of equalization, signal delay, input delay, polarity, and AudioControl proprietary features like AccuBASS®, GTOTM Signal Sense, and MILCTM plus integrated input and output RTA’s.Perfect for OEM integration and aftermarket builds, the D-4.800 packs power and intelligent flexibility into one beautiful cast aluminum chassis. DM Smart App Connect your laptop to the D-4.800 using AudioControl’s DM Smart DSP app, a fully featured Matrix DSP Interface designed to give you instant and clear control over every aspect of your processor. Route any input to any output, adjust gain, delay and polarity then precisely tune the D-4.800 using a 30 band EQ. High-pass, low-pass and band-pass can be set up for any output using 12 or 24 dB/octave Linkwitz-Riley crossovers. For OEM integration, take advantage of the input and output RTAs, available for every input and output, to easily identify and sum factory speaker signals. With a clear GUI and intuitive workflow, AudioControl’s DM Smart DSP app will take the guesswork out of tuning your system to your exact specifications. DM Smart App download DM Smart App via Appstore iOS & Android (*Note: Uninstall old DM software firmware before updating to the new version) User Manual FEATURES Built-in DSP Configurable as 4/3/2 channel amplifier 4 x 200 watts @ 2 ohms 4 x 125 watts @ 4 ohms 400 watts @ 4 ohms bridged AccuBASS® Processing MILCTM Maximum Input Level Control (Patent Pending) GTOTM Signal Sense Active speaker-level inputs (6 channels) for OEM integration 4 preamp inputs 2 assignable p

The D-5.1300 brings five channels of sonic purity and unprecedented levels of power to a complete range of multi-channel and subwoofer amplifiers from AudioControl. Featuring eight active speaker level inputs, six line level inputs, the DSP-driven D-5.1300 features independent crossovers, 30 band EQ with auto EQ, signal summing, signal delay, built in RTAs, and AccuBASS. Integrate seamlessly with your OEM or aftermarket sound system with this single-amp solution, which will transform your audio with impressive power levels delivered to your speakers and subs. Add the optional ACR-3 remote for level control. DM Smart App AudioControl’s multi-platform DM Smart DSP app allows complete control over all tuning features of the D-5.1300 including 30 bands of EQ, signal delay, phase correction, AccuBASS®, GTO™ Signal Sense, MILC™ Clip Detection, plus integrated input and output RTA’s. Access DM Smart DSP from your phone or tablet with the optional AC-BT24 Bluetooth® Streamer & Programmer and use the all new DM Control app for easy access to level adjustments and preset recall. DM Smart App download DM Smart App via Appstore iOS & Android (*Note: Uninstall old DM software firmware before updating to the new version) User Manual FEATURES Built-in DSP Configurable as 5 or 3 channel amplifier 4 x 200 watts + 1 x 500 watts @ 2 ohms 4 x 100 watts + 1 x 300 watts @ 4 ohms 400 watts @ 4 ohms bridged AccuBASS® Processing MILCTM Maximum Input Level Control (Patent Pending) GTOTM Signal Sense Independent Linkwitz-Riley Alignment crossovers Summable active speaker-level inputs (8 channels) for OEM integration 6 preamp inputs PFM Subsonic Filter Solid One-Piece Aluminum Chassis Input and Output RTA for precise and informed tuning Input and Output Delay 12 and 24 dB/octave Linkwitz-Riley crossovers 30 band equalizer with auto EQ Optional ACR-3 remote for preset recall and level control Optional AC-BT24 Bluetooth Streamer/Programmer DM Smart DSP app available in downloads for Mac/PC SPECI

AudioControl has paired our award winning amplifier technology with our powerful Matrix DSP into the D-6.1200. This single-unit solution provides unprecedented power and tuning flexibility when you require audio perfection from your factory or aftermarket sound system. The D-6.1200 features active speaker level inputs, line-level inputs and outputs plus, using AudioControl’s DM Smart DSP app gives you complete control over all features including 30 bands of equalization, signal delay, input delay, polarity and AudioControl proprietary features like AccuBASS®, GTOTM Signal Sense, and MILCTM plus integrated input and output RTA’s. The built in Option Port on the D-6.1200 is the future of car audio and will allow hi-res streaming directly into the DSP. It also opens up future proprietary connections for additional inputs, controllers and interface solutions. Perfect for OEM integration and aftermarket builds, the D-6.1200 packs power and intelligent flexibility into one beautiful cast aluminum chassis. DM Smart App Connect your laptop to the D-6.1200 using AudioControl’s DM Smart DSP app, a fully featured Matrix DSP Interface designed to give you instant and clear control over every aspect of your processor. Route any input to any output, adjust gain, delay and polarity then precisely tune the D-6.1200 using a 30 band EQ. High-pass, low-pass and band-pass can be set up for any output using 12 or 24 dB/octave Linkwitz-Riley crossovers. For OEM integration, take advantage of the input and output RTAs, available for every input and output, to easily identify and sum factory speaker signals. With a clear GUI and intuitive workflow, AudioControl’s DM Smart DSP app will take the guesswork out of tuning your system to your exact specifications. DM Smart App download DM Smart App via Appstore iOS & Android (*Note: Uninstall old DM software firmware before updating to the new version) User Manual FEATURES Built-in DSP Configurable as 6/5/4/3 channel amplifier 6 x 200 watts @ 2

The AudioControl EPIC Series Amplifier delivers powerful, heart-pounding bass in a compact, thermally efficient design. Perfectly paired with The Epicenter Bass Restoration Processor (sold separately), it enhances your bass experience to new levels. This amplifier offers exceptional sound quality and is the only AudioControl amplifier to include a bass knob for easy control. Digital Class-D Amplifier: Powerful yet compact and stable down to a 1 ohm load. 0-12dB Variable Bass Boost Q: Selects the frequency to boost Direct Wire Terminals with Hex Screws: Provide solid, reliable connections. 4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow. 91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A). Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue. Output Over-Current Protection (OCP) Input Over-Voltage Protection (OVP) Input Under-Voltage Protection (UVP) Output DC-Offset Protection (DCP) Over-Temperature Protection (OTP) THE EPICENTER LINK: Simplify your install by connecting the EPIC amplifier directly to an EPICENTER bass restoration processor. FEATURES • Compact High-Power Class D Monoblock Amplifier • High-Current Design – 1Ω Stable • Smart Auto-Reset Protection Circuit • 12 dB/octave Linkwitz-Riley Variable Low Pass Filter • 12 dB/octave Variable Subsonic Filter • EPICBoost™ Variable Frequency Bass Boost • ACR-E Remote Level Control Included • Solid Power/Speaker Terminals with Hex Screws • Built for THE EPICENTER® SPECIFICATIONS INPUTS Line-Level Inputs: 500mV – 12V RMS OUTPUTS Continuous Power (RMS) @ 14.4V 1 x 400 Watts @ 4 ohms 1 x 700 Watts @ 2 ohms 1 x 1000 Watts @ 1 ohm 1 x 2000 Watts @ 2 ohms Bridged (Strapped) Remote Level Control Included WEIGHTS & DIMENSIONS DIMENSIONS: 6.1″ W x 9.41″ L x 2.01″ H PERFORMANCE Frequency Response (+/- 1 dB): 10 Hz – 190 Hz S/N Ratio: 92.1 dBa, Ref 400 Watts @ 4 ohms Power / Grou

The AudioControl EPIC Series Amplifier delivers powerful, heart-pounding bass in a compact, thermally efficient design. Perfectly paired with The Epicenter Bass Restoration Processor (sold separately), it enhances your bass experience to new levels. This amplifier offers exceptional sound quality and is the only AudioControl amplifier to include a bass knob for easy control. Digital Class-D Amplifier: Powerful yet compact and stable down to a 1 ohm load. 0-12dB Variable Bass Boost Q: Selects the frequency to boost Direct Wire Terminals with Hex Screws: Provide solid, reliable connections. 4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow. 91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A). Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue. Output Over-Current Protection (OCP) Input Over-Voltage Protection (OVP) Input Under-Voltage Protection (UVP) Output DC-Offset Protection (DCP) Over-Temperature Protection (OTP) THE EPICENTER LINK: Simplify your install by connecting the EPIC amplifier directly to an EPICENTER bass restoration processor. FEATURES • Compact High-Power Class D Monoblock Amplifier • High-Current Design – 1Ω Stable • Smart Auto-Reset Protection Circuit • 12 dB/octave Linkwitz-Riley Variable Low Pass Filter • 12 dB/octave Variable Subsonic Filter • EPICBoost™ Variable Frequency Bass Boost • ACR-E Remote Level Control Included • Solid Power/Speaker Terminals with Hex Screws • Built for THE EPICENTER® SPECIFICATIONS INPUTS Line-Level Inputs: 500mV – 12V RMS OUTPUTS Continuous Power (RMS) @ 14.4V 1 x 600 Watts @ 4 ohms 1 x 1000 Watts @ 2 ohms 1 x 1500 Watts @ 1 ohm 1 x 3000 Watts @ 2 ohms Bridged (Strapped) Remote Level Control Included WEIGHTS & DIMENSIONS DIMENSIONS: 6.1″ W x 10.59″ L x 2.01″ H PERFORMANCE Frequency Response (+/- 1 dB): 10 Hz – 190 Hz S/N Ratio: 92.8 dBa, Ref 600 Watts @ 4 ohms Power / Gr

The AudioControl EPIC Series Amplifier delivers powerful, heart-pounding bass in a compact, thermally efficient design. Perfectly paired with The Epicenter Bass Restoration Processor (sold separately), it enhances your bass experience to new levels. This amplifier offers exceptional sound quality and is the only AudioControl amplifier to include a bass knob for easy control. Digital Class-D Amplifier: Powerful yet compact and stable down to a 1 ohm load. 0-12dB Variable Bass Boost Q: Selects the frequency to boost Direct Wire Terminals with Hex Screws: Provide solid, reliable connections. 4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow. 91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A). Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue. Output Over-Current Protection (OCP) Input Over-Voltage Protection (OVP) Input Under-Voltage Protection (UVP) Output DC-Offset Protection (DCP) Over-Temperature Protection (OTP) THE EPICENTER LINK: Simplify your install by connecting the EPIC amplifier directly to an EPICENTER bass restoration processor. FEATURES • Compact High-Power Class D Monoblock Amplifier • High-Current Design – 1Ω Stable • Smart Auto-Reset Protection Circuit • 12 dB/octave Linkwitz-Riley Variable Low Pass Filter • 12 dB/octave Variable Subsonic Filter • EPICBoost™ Variable Frequency Bass Boost • ACR-E Remote Level Control Included • Solid Power/Speaker Terminals with Hex Screws • Built for THE EPICENTER® SPECIFICATIONS INPUTS Line-Level Inputs: 500mV – 12V RMS OUTPUTS Continuous Power (RMS) @ 14.4V 1 x 800 Watts @ 4 ohms 1 x 1400 Watts @ 2 ohms 1 x 2000 Watts @ 1 ohm 1 x 4000 Watts @ 2 ohms Bridged (Strapped) Remote Level Control Included WEIGHTS & DIMENSIONS DIMENSIONS: 6.1″ W x 12.56″ L x 2.01″ H PERFORMANCE Frequency Response (+/- 1 dB): 10 Hz – 190 Hz S/N Ratio: 92.9 dBa, Ref 800 Watts @ 4 ohms Power / Gr

The AudioControl EPIC Series Amplifier delivers massive, heart-pounding bass in a thermally efficient design. Perfectly paired with The EPICENTER Bass Restoration Processor (sold separately), it enhances your bass experience to insane levels. The EPIC4000 is the definitive engine for competition-grade audio. Engineered for extreme efficiency and uncompromising stability down to the lowest impedances, this amplifier is built with oversized components and advanced thermal management to deliver its rated wattage reliably, not just on the bench, but deep into every demanding track. It’s not just about loudness; it's about converting colossal power into pure low-frequency output that dominates the sound stage and achieves legendary SPL scores. FEATURES • High-Power, Competition-Grade Class D: Experience high performance and thermal efficiency that delivers monster power to the most demanding subwoofer systems. • High-Current Design – 1Ω Stable: Provides massive, stable power output necessary to drive the most demanding low-impedance speaker loads at 4000W RMS @ 1 ohm. • Smart Auto-Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier should encounter an issue. • 12 dB/octave Linkwitz-Riley Variable Low Pass & Subsonic Filters: Fine-tune your audio setup, matching your subwoofer’s frequency range for ground-shaking bass performance while protecting your subwoofers in vented enclosures. • EPIC Boost Variable Frequency Bass Boost: Hear your bass slam with a variable frequency (30 to 80 Hz) bass equalizer with a boost range of 0 dB to +12 dB. • Solid Power/Speaker Terminals with Hex Screws: Secures maximum current flow and signal integrity, ensuring low-resistance connections for consistent performance. • EPICENTER Link: Simplify installation with the EPICENTER LINK (included) to seamlessly connect the EPIC amplifier and The EPICENTER bass restoration processor (sold separately) for an unbeatable bass experience and 1A fuse prot

The AudioControl EPIC Series Amplifier delivers powerful, heart-pounding bass in a compact, thermally efficient design. Perfectly paired with The Epicenter Bass Restoration Processor (sold separately), it enhances your bass experience to new levels. This amplifier offers exceptional sound quality for the price and is the only AudioControl amplifier to include a bass knob for easy control. Digital Class-D Amplifier: Powerful yet compact and stable down to a 1 ohm load. 0-12dB Variable Bass Boost Q: Selects the frequency to boost Direct Wire Terminals with Hex Screws: Provide solid, reliable connections. 4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow. 91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A). Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue. Output Over-Current Protection (OCP) Input Over-Voltage Protection (OVP) Input Under-Voltage Protection (UVP) Output DC-Offset Protection (DCP) Over-Temperature Protection (OTP) THE EPICENTER LINK: Simplify your install by connecting the EPIC amplifier directly to an EPICENTER bass restoration processor. FEATURES • Compact High-Power Class D Monoblock Amplifier • High-Current Design – 1Ω Stable • Smart Auto-Reset Protection Circuit • 12 dB/octave Linkwitz-Riley Variable Low Pass Filter • 12 dB/octave Variable Subsonic Filter • EPICBoost™ Variable Frequency Bass Boost • ACR-E Remote Level Control Included • Solid Power/Speaker Terminals with Hex Screws • Built for THE EPICENTER® SPECIFICATIONS INPUTS Line-Level Inputs: 500mV – 12V RMS OUTPUTS Continuous Power (RMS) @ 14.4V, <1% THD 1 x 250 Watts @ 4 ohms 1 x 350 Watts @ 2 ohms 1 x 500 Watts @ 1 ohm 1 x 1000 Watts @ 2 ohms Bridged (Strapped) Remote Level Control Included WEIGHTS & DIMENSIONS DIMENSIONS: 6.1″ W x 5.9″ L x 2.01″ H PERFORMANCE Frequency Response (+/- 1 dB): 10 Hz – 190 Hz S/N Ratio: 94 dBa, Ref 400 Watts @

The AudioControl EPIC Series Amplifier delivers powerful, heart-pounding bass in a compact, thermally efficient design. Perfectly paired with The Epicenter Bass Restoration Processor (sold separately), it enhances your bass experience to new levels. This amplifier offers exceptional sound quality for the price and is the only AudioControl amplifier to include a bass knob for easy control. Digital Class-D Amplifier: Powerful yet compact and stable down to a 1 ohm load. 0-12dB Variable Bass Boost Q: Selects the frequency to boost Direct Wire Terminals with Hex Screws: Provide solid, reliable connections. 4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow. 91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A). Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue. Output Over-Current Protection (OCP) Input Over-Voltage Protection (OVP) Input Under-Voltage Protection (UVP) Output DC-Offset Protection (DCP) Over-Temperature Protection (OTP) THE EPICENTER LINK: Simplify your install by connecting the EPIC amplifier directly to an EPICENTER bass restoration processor. FEATURES • Compact High-Power Class D Monoblock Amplifier • High-Current Design – 1Ω Stable • Smart Auto-Reset Protection Circuit • 12 dB/octave Linkwitz-Riley Variable Low Pass Filter • 12 dB/octave Variable Subsonic Filter • EPICBoost™ Variable Frequency Bass Boost • ACR-E Remote Level Control Included • Solid Power/Speaker Terminals with Hex Screws • Built for THE EPICENTER® SPECIFICATIONS INPUTS Line-Level Inputs: 500mV – 12V RMS OUTPUTS Continuous Power (RMS) @ 14.4V 1 x 300 Watts @ 4 ohms 1 x 500 Watts @ 2 ohms 1 x 750 Watts @ 1 ohm 1 x 1500 Watts @ 2 ohms Bridged (Strapped) Remote Level Control Included WEIGHTS & DIMENSIONS DIMENSIONS: 6.1″ W x 8.62″ L x 2.01″ H PERFORMANCE Frequency Response (+/- 1 dB): 10 Hz – 190 Hz S/N Ratio: 92.2 dBa, Ref 300 Watts @ 4 ohms

The AudioControl EPIC Series 4-Channel Amplifier delivers top-quality sound in a compact, thermally efficient design. Engineered with a high-current Class D design, it’s 2Ω stable, ensuring maximum power output while maintaining efficiency. With a smart auto-reset protection circuit and solid power/speaker terminals secured by hex screws, the EPIC Series amplifier offers reliable, exceptional sound quality in a rugged, space-saving package. The EPICBIGFOUR is designed to deliver massive power at 1400W RMS. Digital Class-D Amplifier: Powerful yet compact, designed to handle 2 ohm loads for high output. Direct Wire Terminals with Hex Screws: Provide solid, reliable connections. 4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow. 89dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A). Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue. Output Over-Current Protection (OCP) Input Over-Voltage Protection (OVP) Input Under-Voltage Protection (UVP) Output DC-Offset Protection (DCP) Over-Temperature Protection (OTP) EPICENTER Link: Compatible with The EPICENTER bass restoration processor. FEATURES • Compact High-Power Class D Amplifier • High-Current Design – 2Ω Stable • 4 x 200 Watts @ 4 ohms • 4 x 350 Watts @ 2 ohms • 2 x 650 Watts @ 4 ohms Bridged • Smart Auto-Reset Protection Circuit • 12 dB/octave Linkwitz-Riley Variable High Pass & Low Pass Filters • Solid Power/Speaker Terminals with Hex Screws SPECIFICATIONS INPUTS Line-Level Inputs: 500mV – 12V RMS OUTPUTS Continuous Power (RMS) @ 14.4V 4 x 200 Watts @ 4 ohms 4 x 350 Watts @ 2 ohms 2 x 650 Watts @ 4 ohms Bridged WEIGHTS & DIMENSIONS DIMENSIONS: 6.1″ W x 10.56″ L x 2.01″ H PERFORMANCE Frequency Response (+/- 1 dB): 10 Hz – 22 kHz S/N Ratio: 89 dBa, Ref 200 Watts @ 4 ohms Power / Ground Wire Gauge: 4 AWG Recommended Fuse Rating: 150 Amps High Pass Filter: 12dB/octave Linkwitz

The AudioControl EPIC Series 5-Channel Amplifier delivers top-quality sound in a compact, thermally efficient design, all at an unbeatable price. Engineered with a high-current Class D design, ensuring maximum power output while maintaining efficiency. Perfectly paired with The Epicenter Bass Restoration Processor (sold separately), it enhances your bass experience to new levels. This amplifier offers exceptional sound quality for the price and is the only AudioControl amplifier to include a bass knob for easy control. Digital Class-D Amplifier: Powerful yet compact, designed to handle 2 ohm loads for high output. 0-12dB Variable Bass Boost Q: Selects the frequency to boost Direct Wire Terminals with Hex Screws: Provide solid, reliable connections. 4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow. 91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A). Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue. Output Over-Current Protection (OCP) Input Over-Voltage Protection (OVP) Input Under-Voltage Protection (UVP) Output DC-Offset Protection (DCP) Over-Temperature Protection (OTP) Included ACR-E Remote Control knob THE EPICENTER LINK: Simplify your install by connecting the EPIC amplifier directly to an EPICENTER bass restoration processor. FEATURES • Compact High-Power Class D Amplifier• High-Current Design• 4 x 75 Watts + 1 x 300 Watts @ 4 ohms• 4 x 150 Watts + 1 x 500 Watts @ 2 ohms• 1 x 700 Watts @ 1 ohm• 2 x 300 Watts @ 4 ohms Bridged• Smart Auto-Reset Protection Circuit• 12 dB/octave Linkwitz-Riley Variable HP/LP Filters• 12 dB/octave Variable Subsonic Filter• Solid Power/Speaker Terminals with Hex Screws• Built for THE EPICENTER® SPECIFICATIONS INPUTS Line-Level Inputs: 500mV – 12V RMS OUTPUTS Continuous Power (RMS) @ 14.4V 4 x 75 Watts + 1 x 300 Watts @ 4 ohms 4 x 150 Watts + 1 x 500 Watts @ 2 ohms 1 x 700 Watts @ 1

The AudioControl EPIC Series 4-Channel Amplifier delivers top-quality sound in a compact, thermally efficient design. Engineered with a high-current Class D design, it’s 2Ω stable, ensuring maximum power output while maintaining efficiency. With a smart auto-reset protection circuit and solid power/speaker terminals secured by hex screws, the EPIC Series amplifier offers reliable, exceptional sound quality in a rugged, space-saving package. Digital Class-D Amplifier: Powerful yet compact, designed to handle 2 ohm loads for high output. Direct Wire Terminals with Hex Screws: Provide solid, reliable connections. 4-Gauge Power Terminal and 8-Gauge Speaker Terminal: Designed for maximum current flow. 91dB+ Signal-to-Noise Ratio (@ CEA Standard): Ultra-efficient idle draw (< 0.5-1A). Smart Auto Reset Protection Circuit: Multiple protection modes are in place to prevent damage if your amplifier encounters an issue. Output Over-Current Protection (OCP) Input Over-Voltage Protection (OVP) Input Under-Voltage Protection (UVP) Output DC-Offset Protection (DCP) Over-Temperature Protection (OTP) FEATURES • Compact High-Power Class D Amplifier • High-Current Design – 2Ω Stable • 4 x 100 Watts @ 4 ohms • 4 x 200 Watts @ 2 ohms • 2 x 400 Watts @ 4 ohms Bridged • Smart Auto-Reset Protection Circuit • 12 dB/octave Linkwitz-Riley Variable High Pass Filters • Solid Power/Speaker Terminals with Hex Screws SPECIFICATIONS INPUTS Line-Level Inputs: 500mV – 12V RMS OUTPUTS Continuous Power (RMS) @ 14.4V 4 x 100 Watts @ 4 ohms 4 x 200 Watts @ 2 ohms 2 x 400 Watts @ 4 ohms Bridged WEIGHTS & DIMENSIONS DIMENSIONS: 6.1″ W x 9.41″ L x 2.01″ H PERFORMANCE Frequency Response (+/- 1 dB): 10 Hz – 22 kHz S/N Ratio: 90.1 dBa, Ref 100 Watts @ 4 ohms Power / Ground Wire Gauge: 4 AWG Recommended Fuse Rating: 80 Amps High Pass Filter: 12dB/octave Linkwitz-Riley, Off, 50 Hz to 500 Hz Speaker Terminal Wire Gauge: 8 AWG IN THE BOX: EPICFOUR, Wrench, Screws, Manual, Warranty

When you demand the perfect blend of power and performance, AudioControl provides answers and the LC-1.1500 is no exception.No matter the installation, you can be assured power will meet and exceed expectations with 1500 watts at 2 ohms. The mix of high-level and low-level inputs means you have the widest input voltage range in the industry. AudioControl’s patented AccuBASS® circuit is the only way to properly overcome factory bass roll-off and heavily equalized factory bass settings.Enjoy loud, clean, and articulate bass combined with the best warranty available with the LC-1.1500 amplifier. FEATURES Subwoofer amplifier with patented AccuBASS® 1500 watts @ 2 ohms 850 watts @ 4 ohms AccuBASS® Processing MILC™ Maximum Input Level Control (Patent Pending) GTO™ Signal Sense 24 dB/octave Linkwitz-Riley Alignment crossover Speaker level and preamp inputs Optional ACR-1 assignable remote control Solid One-Piece Aluminum Chassis SPECIFICATIONS INPUTS Preamp Inputs: 2 balanced Input Voltage Range: 500 mV – 6 Vrms Speaker Level Inputs: 2 Speaker Level Input Voltage Range: 3 V – 40 Vrms OUTPUTS Rated Continuous (RMS) Power at 14.4V: 4 Ω – 850 W RMS 2 Ω – 1500 W RMS PERFORMANCE Frequency Response: 10 Hz – 30 kHz Signal to Noise: 102 dBa, Ref 850 W @ 4 Ohm Damping Factor: 670 at 10 V, 4 Ohm Output, 100 Hz THD+N: < 0.01% Minimum Power / Ground Wire Gauge: 0 AWG wire Fuse Rating: 4 x 40 A Crossover: 24 dB/octave Linkwitz-Riley, Adjustable From 30 Hz – 230 Hz PFM Subsonic Filter: 24 Hz WEIGHT & DIMENSIONS Dimensions: 12″W x 7.95″D x 2.1″H Weight: 7.2 lbs (3.3 kg) IN THE BOX: LC-1.1500, Speaker connectors, Fuses, Manual, Warranty

When you demand the perfect blend of power and performance, AudioControl provides answers and the LC-1.800 is no exception.No matter the installation, you can be assured power will meet and exceed expectations with 800 watts at 2 ohms. The mix of high level and low level inputs mean you have the widest input voltage range in the industry. AudioControl’s patented AccuBASS® circuit is the only way to properly overcome factory bass roll-off and heavily equalized factory bass settings.Enjoy loud, clean, and articulate bass combined with the best warranty available with the LC-1.800 amplifier. FEATURES Subwoofer amplifier with patented AccuBASS® 800 watts @ 2 ohms 500 watts @ 4 ohms AccuBASS® Processing MILC™ Maximum Input Level Control (Patent Pending) GTO™ Signal Sense 24 dB/octave Linkwitz-Riley Alignment crossover Speaker level and preamp inputs Optional ACR-1 assignable remote control Solid One-Piece Aluminum Chassis SPECIFICATIONS INPUTS Preamp Inputs: 2 balanced Input Voltage Range: 500 mV – 6 Vrms Speaker Level Inputs: 2 Speaker Level Input Voltage Range: 3 V – 40 Vrms OUTPUTS Rated Continuous (RMS) Power at 14.4V: 4 Ω – 500 W RMS 2 Ω – 800 W RMS PERFORMANCE Signal to Noise: 102 dBa, Ref 500 W @ 4 Ohm Damping Factor: 670 at 10 V, 4 Ohm Output, 100 Hz THD+N: < 0.01% Minimum Power / Ground Wire Gauge: 4 AWG wire Fuse Rating: 2 x 40 A Crossover: 24 dB/octave Linkwitz-Riley, Adjustable From 30 Hz – 230 Hz PFM Subsonic Filter: 24 Hz WEIGHT & DIMENSIONS Dimensions: 9″W x 7.95″D x 2.1″H Weight: 5.0lbs (2.0kg) IN THE BOX: LC-1.800, Speaker connectors, Fuses, Manual, Warranty

“Making Good Sound Great” is our passion at AudioControl and that legacy continues with the LC-4.800 multi-channel amplifier. This unique high power design features six active speaker level inputs with summing allowing you to interface and integrate with most factory installed source units. The patent pending AccuBASS® circuit compensates for factory bass roll-off and provides maximum bass performance. More control and features include our GTO signal Sense, Configurable Crossovers and assignable remote level control. We have incorporated years of technology into the LC-4.800 making this a perfect solution based amplifier. FEATURES Configurable as 4/3/2 channel amplifier 4 x 200 watts @ 2 ohms 4 x 125 watts @ 4 ohms 400 watts @ 4 ohms bridged AccuBASS® Processing MILC™ Maximum Input Level Control (Patent Pending) GTO™ Signal Sense Independent Linkwitz-Riley Alignment crossovers Summable active speaker-level inputs (6 channels) for OEM integration 4 preamp inputs 2 assignable preamp outputs PFM Subsonic Filter Optional ACR-1 assignable remote control Solid One-Piece Aluminum Chassis SPECIFICATIONS INPUTS Preamp Inputs: 4 balanced Input Voltage Range: 250 mV – 8 Vrms Speaker Level Inputs: 6 Speaker Level Input Voltage Range: 3 V – 40 Vrms OUTPUTS Rated Continuous (RMS) Power at 14.4V: 4 Ω – 125 W x 4 RMS 2 Ω – 200 W x 4 RMS Bridged 4 Ω – 400 W RMS Preamp Outputs: 2 Maximum Preamp Output: 8.5 V RMS PERFORMANCE Frequency Response: 10 Hz – 30 kHz Signal to Noise: 102 dBa, Ref 200 W @ 2 Ohm THD+N: < 0.1% Minimum Power / Ground Wire Gauge: 3 AWG wire Fuse Rating: 2 x 40 A Crossover: Linkwitz-Riley, Adjustable From 30 Hz – 300 Hz WEIGHT & DIMENSIONS Dimensions: 9″W x 7.95″D x 2.1″H Weight: 5.0lbs (2.0kg) IN THE BOX: LC-4.800, Speaker connectors, Fuses, Manual, Warranty

The LC-5.1300 brings five channels of sonic purity and unprecedented levels of power to a complete range of multi-channel and subwoofer amplifiers from AudioControl. Featuring eight active speaker level inputs, six line level inputs, the LC-5.1300 is packed with intuitive setup controls for high-pass, band-pass, and low-pass filters, automatic and selectable signal summing, and AccuBASS. Integrate seamlessly with your OEM or aftermarket sound system with this single-amp solution, which will transform your audio with impressive power levels delivered to your speakers and subs. Add the optional ACR-1 remote for level control. FEATURES Configurable as 5 or 3 channel amplifier 4 x 200 watts + 1 x 500 watts @ 2 ohms 4 x 100 watts + 1 x 300 watts @ 4 ohms 400 watts @ 4 ohms bridged AccuBASS® Processing MILCTM Maximum Input Level Control (Patent Pending) GTOTM Signal Sense 3-way Independent Linkwitz-Riley Alignment crossovers Summable active speaker-level inputs (8 channels) for OEM integration 6 preamp inputs PFM Subsonic Filter Optional ACR-1 assignable remote control Solid One-Piece Aluminum Chassis SPECIFICATIONS INPUTS Preamp Inputs: 6 balanced Preamp Input Voltage Range: 500 mV – 6 Vrms Speaker Level Inputs: 8 Speaker Level Input Voltage Range: 3 V – 40 Vrms OUTPUTS Rated Continuous (RMS) Power at 14.4V: 4 Ω – 100 W x 4 + 300 W x 1 2 Ω – 200 W x 4 + 500 W x 1 Bridged 4 Ω – 400 W PERFORMANCE Frequency Response: 20 Hz – 22 kHz Signal to Noise: 102 dBa, Ref 200 W @ 2 Ohm THD+N: < 0.1% Minimum Power / Ground Wire Gauge: 3 AWG wire Fuse Rating: 4 x 30 A Crossover: 3-way Linkwitz-Riley, Adjustable From 30 Hz – 5000 Hz WEIGHT & DIMENSIONS Dimensions: 12.0″W x 8.0″D x 2.1″H Weight: 7.2lbs. (3.3kg) IN THE BOX: LC-5.1300, Speaker Connectors, Fuses, Manual, Warranty

Building from the hugely successful LC-4.800 multi-channel amplifier, the LC-6.1200 is surely the most flexible 6-channel amplifier on the market. Featuring eight active speaker level inputs with summing, coupled with an intuitive three-way Linkwitz-Riley crossover network, the LC-6.1200 can be easily integrated with most factory-installed source units. The patented AccuBASS® circuit compensates for factory bass roll-off and provides maximum bass performance.More control and features include our GTO Signal Sense, MILC Source Clip Detection, and assignable Remote Level Control. The LC-6.1200 builds on the legacy of audio passion and a focus on user-friendly features, making this a perfect solution-based amplifier. FEATURES Configurable as 6/5/4/3/2 channel amplifier 6 x 200 watts @ 2 ohms 6 x 125 watts @ 4 ohms 400 watts @ 4 ohms bridged AccuBASS® Processing MILCTM Maximum Input Level Control (Patent Pending) GTOTM Signal Sense 3-way Independent Linkwitz-Riley Alignment crossovers Summable active speaker-level inputs (8 channels) for OEM integration 6 preamp inputs 2 assignable preamp outputs PFM Subsonic Filter Optional ACR-1 assignable remote control Solid One-Piece Aluminum Chassis SPECIFICATIONS INPUTS Preamp Inputs: 6 balanced Preamp Input Voltage Range: 250 mV – 8 Vrms Speaker Level Inputs: 8 Speaker Level Input Voltage Range: 3 V – 40 Vrms OUTPUTS Rated Continuous (RMS) Power at 14.4V: 4 Ω – 125 W x 6 RMS 2 Ω – 200 W x 6 RMS Bridged 4 Ω – 400 W RMS Preamp Outputs: 2 Maximum Preamp Output: 8.5 V RMS PERFORMANCE Frequency Response: 10 Hz – 30 kHz Signal to Noise: 102 dBa, Ref 200 W @ 2 Ohm THD+N: < 0.1% Minimum Power / Ground Wire Gauge: 3 AWG wire Fuse Rating: 3 x 40 A Crossover: 3-way Linkwitz-Riley, Adjustable From 30 Hz – 5000 Hz WEIGHT & DIMENSIONS Dimensions: 12″W x 8.0″D x 2.1″H Weight: 7.2lbs. (3.3kg) IN THE BOX: LC-6.1200, Speaker Connectors, Fuses, Manual, Warranty