Home/Equipment/Accessories/Sundown Audio

Sundown Audio Accessories

Sundown Audio is an American car audio manufacturer specializing in high-output subwoofers and amplifiers built for serious bass enthusiasts and SPL competitors. Founded by Jacob Fuller in 2006, the company assembles products in North Carolina, USA, with meticulous attention to detail and rigorous quality testing. Their product lines—including the legendary SA, X, and Nightshade series—have earned a devoted following in the car audio community for delivering extreme power handling and deep, clean bass. Sundown was among the first to introduce high-excursion subwoofers and enhanced cooling systems, innovations that have become industry standards.

65 Products

Visit Website

10’x10’ Sundown Audio Tent

10’x10’ Sundown Audio Tent *Flags not included but can be purchased seperately.

18" Frame Adapter

18" Sundown Frame Adapter - 127mm BP 18" woofers Mv.1 Xv.2, Xv.3, Xv.4 Zv.4 NSv.3, NSv.4, NSv.5, NSv.6

20’x10’ Sundown Audio Tent

20’x10’ Sundown Audio Tent *Flags not included but can be purchased separately.

80mil/190mil Premium Sound Deadener

Sundown Audio Sound Deadener – Premium 80/190mil Acoustic Damping Solution Silence Isn’t Just Golden—It’s Performance. For those who demand nothing but the best, Sundown Audio delivers with its 80mil / 190mil-rated premium sound deadener —a no-compromise material designed to eliminate resonance, reduce cabin noise, and maximize audio performance. Built using the same proven composition as competition-grade dampening products, this Sundown exclusive takes it further with refined quality control, enhanced adhesion, and the trusted performance only the Sundown name can bring. Crafted for high-end builds and SPL systems where every decibel—and every detail—matters, this material combines dense, soft bitumen with a high-mass layer to stop vibration at the source. Whether you're sealing a trunk for subwoofers or lining a full competition car, this is your foundation for elite sound reproduction. Why Sundown? Because not all deadener is created equal. While others may share a similar formula, only Sundown Audio's variant undergoes enhanced QC, upgraded thermal bonding, and branding that backs performance with reputation. It’s the same concept, executed at a higher level—because that’s what the Sundown name stands for. Product Highlights: Premium 80mil / 190mil density-rated composite Industry-leading acoustic damping power 15 sheets per box (10” x 20”) – covers ~20.8 sq ft Thick 4.0mm build for maximum low-frequency absorption Weight: 34 lbs per box Self-adhesive with Sundown-reinforced backing Color: Matte Black with premium finish Installation Tips: Clean the application surface thoroughly with isopropyl alcohol or a residue-free cleaner. For the best fit, use a heat gun to soften the material and improve flexibility. Press firmly over contours and curves to ensure full contact and long-term performance.

Engine Options

Epoxy Gun

Sundown Epoxy Gun SDGG-1 USED ON 50ML TWO PART EPOXY TUBES

Full Tilt Audio Fuse Holder

Fuse Holder ANL Fuse Fitment Fits 1/0 AWG or 4 AWG Cable Silver Finish with Clear Cover Set Screw Connection

Full Tilt Audio Fuses

ANL Fuse Silver Finish Available In The Following Sizes: 150A 250A 350A 450A 500A

Full Tilt Audio Ring Terminals - 10 Pack

Tinned Copper Lug- 10 Pack Tinned Copper Lugs Heat Shrink Sold Separately Three Sizes Available 1/0 AWG 4 AWG 8 AWG

NeoPro 6.5" & 8" Drop-In Kit

These are standard drop-in recone kits ONLY. If you need a custom recone kit, you will still need to call us to place your order. There are no refunds or exchanges with drop-in re-cone kits. Please make sure you are ordering the correct model, version and impedance prior to ordering.

NS-Series Drop-In Kit

**NSv1 and NSv2 drop-in kits will need to be called in to order.** These are standard drop-in recone kits ONLY. If you need a custom recone kit, you will still need to call us to place your order. ** Due to shortage on parts, some recones are taking longer than expected, please be patient as we work on getting yours read** **There are no refunds or exchanges with drop-in re-cone kits. Please make sure you are ordering the correct model, version and impedance prior to ordering.**

OFH-ST ANL Standard Silver Finish Fuse Holder

Fuse Holder, ANL, 1/0, 4AWG For main DC circuit protection on large battery banks and/or amplifiers.

OFH-WP ANL Waterproof Silver Finish Fuse Holder

Fuse Holder, ANL, 1/0, 4AWG For main DC circuit protection on large battery banks and/or amplifiers. Features & Specifications ANL Fuse & Fuse Holder Angled holder, accepts 1/0 AWG Power Cable 300 AMP ANL Fuse Included Waterproof Design Visible indication of blown condition For use with Sundown Audio & other brand ANL Fuse Blocks.

Push Terminal Assembly for U, X, Zv, Ns and Team Subwoofers

TERM-4G 4AWG TERMINAL Terminal - Standard 4awg, One woofer's worth (2 of each color) Zv.1, Zv.2, Zv.3 NSv.1, NSv.2 May Also be used on SA Classic to upgrade TERM-8SD TERMINAL FOR 8" Terminal - 8" Sundown, One woofer's worth (2 of each color) All 8" woofers excluding SML TERM-BLOCK SUNDOWN TERMINAL BLOCK Terminal Block - Sundown, One woofer's worth 10" - 18" Woofers Uv.1, Uv.2 Mv.1 Xv.1, Xv.2, Xv.3, Xv.4 Zv.4, Zv.5, Zv.6, Zv.7 NSv.3, NSv.4, NSv.5, NSv.6 SDDN TEAM May Also be used on SAv.2 to upgrade TERM-SABLOCK SA SERIES TERMINAL BLOCK Terminal Black - SA, One woofer's worth SA Classic SAv.2

SA-Series 6.5" Drop-In Kit

These are standard drop-in recone kits ONLY. If you need a custom recone kit, you will still need to call us to place your order. There are no refunds or exchanges with drop-in re-cone kits. Please make sure you are ordering the correct model, version and impedance prior to ordering.

SA-Series Drop-In Kit

Sundown Audio SA-Series Drop-In KitThese are standard drop-in recone kits ONLY. If you need a custom recone kit, you will still need to call us to place your order. ** Due to a shortage of parts, some recones are taking longer than expected, please be patient as we work on getting yours read** **There are no refunds or exchanges with drop-in re-cone kits. Please make sure you are ordering the correct model, version, and impedance before ordering.**

SAZ 2M-1F Y-Splitter

SAZ Y-Splitter & Mono RCA INTERCONNECTS FeaturesTwisted Pair, Solid Conductor Signal Wire 100% OFC (Oxygen-Free Copper) Signal Wire, Shielding Foil, and Shielding Braid Protective Woven Jacket for Maximum Durability Custom Tooled, High-Grip Connectors Cross-Cut Outer Connector for Secure Connection Dual-Split Inner Connector for Maximum Signal Transfer Channels: Mono, Y-Splitter, 2 ch, and 4ch Available Mono lengths: 1.5FT, 3FT, 6FT Available 2-Channel lengths: 1.5FT, 3FT, 6FT, 9FT, 12FT, 17FT, 20FT, 25FT Available 4-Channel lengths: 12FT, 17FT, 20FT, 25

SAZ1-1.5FT Mono Channel RCA Interconnects

SAZ Y-Splitter & Mono RCA INTERCONNECTS FeaturesTwisted Pair, Solid Conductor Signal Wire 100% OFC (Oxygen-Free Copper) Signal Wire, Shielding Foil, and Shielding Braid Protective Woven Jacket for Maximum Durability Custom Tooled, High-Grip Connectors Cross-Cut Outer Connector for Secure Connection Dual-Split Inner Connector for Maximum Signal Transfer Channels: Mono, Y-Splitter, 2 ch, and 4ch Available Mono lengths: 1.5FT, 3FT, 6FT Available 2-Channel lengths: 1.5FT, 3FT, 6FT, 9FT, 12FT, 17FT, 20FT, 25FT Available 4-Channel lengths: 12FT, 17FT, 20FT, 25

SAZ1-3FT Mono Channel RCA Interconnects

SAZ Y-Splitter & Mono RCA INTERCONNECTS Features Twisted Pair, Solid Conductor Signal Wire 100% OFC (Oxygen-Free Copper) Signal Wire, Shielding Foil, and Shielding Braid Protective Woven Jacket for Maximum Durability Custom Tooled, High-Grip Connectors Cross-Cut Outer Connector for Secure Connection Dual-Split Inner Connector for Maximum Signal Transfer Channels: Mono, Y-Splitter, 2 ch, and 4ch Available Mono lengths: 1.5FT, 3FT, 6FT Available 2-Channel lengths: 1.5FT, 3FT, 6FT, 9FT, 12FT, 17FT, 20FT, 25FT Available 4-Channel lengths: 12FT, 17FT, 20FT, 25

SAZ1-6FT Mono Channel RCA Interconnects

SAZ Y-Splitter & Mono RCA INTERCONNECTS FeaturesTwisted Pair, Solid Conductor Signal Wire 100% OFC (Oxygen-Free Copper) Signal Wire, Shielding Foil, and Shielding Braid Protective Woven Jacket for Maximum Durability Custom Tooled, High-Grip Connectors Cross-Cut Outer Connector for Secure Connection Dual-Split Inner Connector for Maximum Signal Transfer Channels: Mono, Y-Splitter, 2 ch, and 4ch Available Mono lengths: 1.5FT, 3FT, 6FT Available 2-Channel lengths: 1.5FT, 3FT, 6FT, 9FT, 12FT, 17FT, 20FT, 25FT Available 4-Channel lengths: 12FT, 17FT, 20FT, 25

SAZ4-12FT SAZ 4-Channel RCA Interconnects

SAZ 4-Channel Series RCA Interconnects FeaturesTwisted Pair, Solid Conductor Signal Wire 100% OFC (Oxygen-Free Copper) Signal Wire, Shielding Foil, and Shielding Braid Protective Woven Jacket for Maximum Durability Custom Tooled, High-Grip Connectors Cross-Cut Outer Connector for Secure Connection Dual-Split Inner Connector for Maximum Signal Transfer Channels: Mono, Y-Splitter, 2 ch, and 4ch Available Mono lengths: 1.5FT, 3FT, 6FT Available 2-Channel lengths: 1.5FT, 3FT, 6FT, 9FT, 12FT, 17FT, 20FT, 25FT Available 4-Channel lengths: 12FT, 17FT, 20FT, 25FT

SAZ4-17FT SAZ 4-Channel RCA Interconnects

SAZ 4-Channel Series RCA Interconnects FeaturesTwisted Pair, Solid Conductor Signal Wire 100% OFC (Oxygen-Free Copper) Signal Wire, Shielding Foil, and Shielding Braid Protective Woven Jacket for Maximum Durability Custom Tooled, High-Grip Connectors Cross-Cut Outer Connector for Secure Connection Dual-Split Inner Connector for Maximum Signal Transfer Channels: Mono, Y-Splitter, 2 ch, and 4ch Available Mono lengths: 1.5FT, 3FT, 6FT Available 2-Channel lengths: 1.5FT, 3FT, 6FT, 9FT, 12FT, 17FT, 20FT, 25FT Available 4-Channel lengths: 12FT, 17FT, 20FT, 25FT

SAZ4-20FT SAZ 4-Channel RCA Interconnects

SAZ 4-Channel Series RCA Interconnects FeaturesTwisted Pair, Solid Conductor Signal Wire 100% OFC (Oxygen-Free Copper) Signal Wire, Shielding Foil, and Shielding Braid Protective Woven Jacket for Maximum Durability Custom Tooled, High-Grip Connectors Cross-Cut Outer Connector for Secure Connection Dual-Split Inner Connector for Maximum Signal Transfer Channels: Mono, Y-Splitter, 2 ch, and 4ch Available Mono lengths: 1.5FT, 3FT, 6FT Available 2-Channel lengths: 1.5FT, 3FT, 6FT, 9FT, 12FT, 17FT, 20FT, 25FT Available 4-Channel lengths: 12FT, 17FT, 20FT, 25FT

SAZ4-25FT SAZ 4-Channel RCA Interconnects

SAZ 4-Channel Series RCA Interconnects FeaturesTwisted Pair, Solid Conductor Signal Wire 100% OFC (Oxygen-Free Copper) Signal Wire, Shielding Foil, and Shielding Braid Protective Woven Jacket for Maximum Durability Custom Tooled, High-Grip Connectors Cross-Cut Outer Connector for Secure Connection Dual-Split Inner Connector for Maximum Signal Transfer Channels: Mono, Y-Splitter, 2 ch, and 4ch Available Mono lengths: 1.5FT, 3FT, 6FT Available 2-Channel lengths: 1.5FT, 3FT, 6FT, 9FT, 12FT, 17FT, 20FT, 25FT Available 4-Channel lengths: 12FT, 17FT, 20FT, 25FT

SB2-Y 2-Channel RCA Y-Splitter

SB2 2-Channel Series RCA Interconnects FeaturesTwisted Pair, Solid Conductor Signal Wire Injection molded RCAs for stabilization Custom Tooled Connectors Channels: 2ch (SB2) & 4ch (SB4) Channels: Mono, Y-Splitter, 2 ch, and 4ch Available 2-Channel lengths: 3FT, 6FT, 9FT, 12FT, 17FT, 20FT, 25FT Available 4-Channel lengths: 12FT, 17FT, 20FT, 25FT

SD Series Spacers

10"-15" SPACER Spacer - CAST - SD Frame Vented - 10/12/15" 18" woofers Mv.1 Xv.2, Xv.3, Xv.4 Zv.4 NSv.3, NSv.4, NSv.5, NSv.6 10"-15" Woofers Mv.1 Xv.1, Zv.2, Xv.3, Xv.4 Zv.4, Zv.5, Zv.6, Zv.7 NSv.3, NSv.4, NSv.5, NSv.6 SDDN TEAM 18" SPACER Spacer - CAST - SD 18 Frame Vented - 18" 18" Woofers Zv.5, Zv.6, Zv.7 SDDN TEAM

SD-Series Drop-In Kit

Sundown Audio SD-Series Drop-In KitThese are standard drop-in recone kits ONLY. If you need a custom recone kit, you will still need to call us to place your order. ** Due to shortage on parts, some recones are taking longer than expected, please be patient as we work on getting yours read** **There are no refunds or exchanges with drop-in re-cone kits. Please make sure you are ordering the correct model, version and impedance prior to ordering.**

SDDN-Series Drop In Kit

These are standard drop-in recone kits ONLY. If you need a custom recone kit, you will still need to call us to place your order. There are no refunds or exchanges with drop-in re-cone kits. Please make sure you are ordering the correct model, version and impedance prior to ordering.

SHFST 2" Throat Super Horn With Ferrite Magnet

2in Horn driver Strontium Ferrite Magnet Die-cast Aluminium Cover Die-cast Aluminium Horn Titanium Diaphragm 4 Ohm 80 Wrms Exit Throat Diameter @ inch – 2 Rated Impedance @Ohm – 4 Power Handling Capacity @ Watt – 80 Program Power @Watt – 160 Sensitivity(1W/1m) @ Hz – 115 Frequency Range @ Hz – 1,000-20,000 Voice Coil Diameter @ inch - 2 Voice Coil Material - CCAW Voice Coil Former Material - Kapton Voice Coil Winding Depth @ mm - 2 Cutout – 5.5” Mounting Depth – 5.15” Gap Height @ mm – 2.5 Driver Size @ in 5.28*2.5” Back Cover Material – Die-cast Aluminium Diaphragm Material - Titanium Horn Material – Die-cast Aluminium Product Dimension @ in – L6.75*W6.75*H5.5”Key Features: Efficient Power Handling: Rated at 80W RMS and 160W program power, this driver offers a balance of power and performance for demanding setups. Wide Frequency Range: Covers frequencies from 1,000Hz to 20,000Hz, ensuring crisp and detailed sound. High Sensitivity: A sensitivity of 115 dB (1W/1m @ Hz) delivers excellent output with minimal power consumption.Durable Construction: Diaphragm Material: Titanium diaphragm for reliable performance and precise audio reproduction. Voice Coil Design: 2-inch CCAW (Copper Clad Aluminum Wire) voice coil on a Kapton former provides thermal stability and durability. Robust Build: Die-cast aluminum cover and horn for lightweight strength and effective sound dispersion. Magnet: Strontium ferrite magnet ensures high magnetic flux and long-lasting reliability.Specifications: Exit Throat Diameter: 2 inches Impedance: 4 Ohms Cutout Size: 5.5 inches Mounting Depth: 5.15 inches Driver Size: 5.28 x 2.5 inches Product Dimensions: 6.75 x 6.75 x 5.5 inches (L x W x H)Additional Details: Voice Coil Winding Depth: 2 mm Gap Height: 2.5 mm Materials: Titanium diaphragm, Kapton former, and die-cast aluminum components provide durability and optimized performance.

SHFTL 2" Throat Super Horn With Ferrite Magnet

3in Horn driver Strontium Ferrite Magnet Die-cast Aluminium Cover Die-cast Aluminium Horn Titanium Diaphragm 4 Ohm 110 Wrms Exit Throat Diameter @ inch – 2 Rated Impedance @Ohm – 4 Power Handling Capacity @ Watt – 110 Program Power @Watt – 220 Sensitivity(1W/1m) @ Hz – 118 Frequency Range @ Hz - 600-20,000 Voice Coil Diameter @ inch - 3 Voice Coil Material - CCAW Voice Coil Former Material - Kapton Voice Coil Winding Depth @ mm - 3 Cutout – 6.75” Mounting Depth – 9.65” Gap Height @ mm – 3.5 Driver Size @ in 6.7*3” Back Cover Material – Die-cast Aluminium Diaphragm Material - Titanium Horn Material – Die-cast Aluminium Product Dimension @ in – L9.5*W9.5*H10”Key Features: Powerful Performance: Rated at 110W RMS and 220W program power, it handles demanding audio requirements with ease. Wide Frequency Range: Covers 600Hz to 20,000Hz, providing crisp, detailed sound reproduction across mid-to-high frequencies. Exceptional Sensitivity: Sensitivity of 118 dB (1W/1m @ Hz) ensures efficient sound output with reduced power consumption.Robust Construction: Durable Materials: Titanium diaphragm for precision and long-lasting performance. Voice Coil Design: Equipped with a 3-inch CCAW (Copper Clad Aluminum Wire) voice coil on a Kapton former for excellent thermal resistance and durability. High-Quality Build: Die-cast aluminum cover and horn provide lightweight durability and efficient sound dispersion. Magnet: Strontium ferrite magnet ensures strong magnetic flux for reliable operation.Specifications: Exit Throat Diameter: 2 inches Impedance: 4 Ohms Cutout Size: 6.75 inches Mounting Depth: 9.65 inches Driver Size: 6.7 x 3 inches Product Dimensions: 9.5 x 9.5 x 10 inches (L x W x H)Additional Details: Voice Coil Winding Depth: 3 mm Gap Height: 3.5 mm Materials: Titanium diaphragm, Kapton former, and die-cast aluminum construction for maximum durability and performance.

Shims

Shims For Every Sub Series Shim - Uv.1/2 3" Uv.1 & Uv.2 Shim - Xv.2 / Zv.4 3" Xv.1, Xv.2 Zv.3, Zv.4 Shim - Xv.3 / Zv.6 3" Xv.3 Zv.6 Shim - Zv.5 / NSv3 3" Zv.5 NSv.3

SHNMD 2" Throat NEO Super Horn

SHNMD 2" Throat Super Horn With NEO Magnet 2in Horn driver NEO Magnet Die-cast Aluminium Cover Die-cast Aluminium Horn Titanium Diaphragm 4 Ohm 110 Wrms Exit Throat Diameter @ inch – 2 Rated Impedance @Ohm – 4 Power Handling Capacity @ Watt – 110 Program Power @Watt – 220 Sensitivity(1W/1m) @ Hz – 120 Frequency Range @ Hz - 600-20,000 Voice Coil Diameter @ inch - 3 Voice Coil Material - CCAR Voice Coil Former Material - Kapton Voice Coil Winding Depth @ mm - 3 Cutout – 6” Mounting Depth – 6.8” Gap Height @ mm – 3.5 Magnet Type - Neodymium Driver Size @ in 4.9*2.18” Back Cover Material – Die-cast Aluminium Diaphragm Material - Titanium Horn Material – Die-cast Aluminium Product Dimension @ in - L7.25*W7.25*H7.19” Key Features: Powerful Output : Rated at 110W RMS and 220W program power, this driver provides robust sound performance suitable for demanding audio setups. Wide Frequency Range : Operates efficiently across 600Hz to 20,000Hz, ensuring clear and dynamic audio reproduction from mid to high frequencies. High Sensitivity : With a sensitivity of 120 dB (1W/1m @ Hz), it minimizes power consumption while delivering maximum sound output. Premium Build: Diaphragm Material : Titanium diaphragm ensures durability and accurate sound reproduction. Voice Coil : Features a 3-inch CCAR (Copper Clad Aluminum Ribbon) voice coil on a Kapton former for excellent thermal and mechanical stability. Horn and Back Cover : Constructed with die-cast aluminum for lightweight strength and enhanced sound dispersion. Magnet Type : Equipped with a Neodymium magnet for high magnetic flux and reduced weight. Specifications: Exit Throat Diameter : 2 inches Impedance : 4 Ohms Cutout Size : 6 inches Mounting Depth : 6.8 inches Driver Size : 4.9 x 2.18 inches Product Dimensions : 7.25 x 7.25 x 7.19 inches (L x W x H) Additional Details: Voice Coil Winding Depth : 3 mm Gap Height : 3.5 mm Materials : Die-cast aluminum components, Kapton former, and titanium diaphragm for a robust and reliable build.

SLD-Series Drop In Kit

These are standard drop-in recone kits ONLY. If you need a custom recone kit, you will still need to call us to place your order. There are no refunds or exchanges with drop-in re-cone kits. Please make sure you are ordering the correct model, version and impedance prior to ordering.

Spider Spacer

Spider Spacer - 282mm - Bottom 18" woofers Mv.1 Xv.2, Xv.3, Xv.4 Zv.4, Zv.5, Zv.6, Zv.7 NSv.3, NSv.4, NSv.5, NSv.6 SDDN