Lithium Pros Accessories

1006 36V 7A Lithium Ion Battery Charger is purpose built for Lithium Pros 36V Lithium Ion Marine batteries. It is a light weight, high frequency type charger for charging 36V batteries made with Lithium Iron Phosphate cells. The 7A of output typically recharges Lithium Pros 36V Lithium Ion batteries with ease. (Actual recharge time varies by specific application and energy consumed.) High frequency chargers like the 1006 36V 7A Lithium Ion Battery Charger offer very consistent and smooth output voltage extending the life of your battery. It is 3 lbs and connects to the battery with alligator clips. The 1006 36V 7A Lithium Ion Battery Charger is fully automatic and fan cooled. Two LEDs show the simple status of the charger. The first status LED is red when input power is present. The second status LED is orange while charging and green when charging is complete and charging has stopped. In addition, the LCD display will read "End" when the charge cycle completes in a normal manner. "End" in LCD display tells you that the battery reached normal "fully charged" voltage and that the current acceptance rate dropped to less than 900mA in a normal amount of time. It features an LCD display with a wealth of battery status information. Battery voltage, charging amperage, State of Charge, Amp-hours charged, time on the charger, and more can all be viewed from the LCD display. This 1006 36V 7A Lithium Ion Battery Charger is universal voltage meaning that it accepts anything from 110VAC~240VAC @ 50~60Hz. (USA power cords included.) It is fused protected with a 6.3A 5mm x 20mm fuse installed.

1008 16V 15A LiFePO4 Racing Battery Charger is purpose built for Lithium Pros 16V Lithium Ion Racing batteries. It is a light weight, high frequency type charger for rapid charging 16V batteries made with Lithium Iron Phosphate cells. The 15A of output typically recharges Lithium Pros 16V Lithium Ion Racing batteries in 15 minutes or less after a typical 1/4 mile drag racing pass. (Actual recharge time varies by specific application and energy consumed.) High frequency chargers like the 1008 16V 15A Lithium Ion Racing Battery Charger offer very consistent and smooth output voltage extending the life of your battery. It is 3 lbs and connects to the battery with alligator clips. These can be removed and quick disconnects of the racer's choice can be installed. (Please insure any connectors are tightly crimped and soldered onto the output wires from the charger. Carefully observe polarity.) The 1008 16V 15A Lithium Ion Racing Battery Charger is fully automatic and fan cooled. Two LEDs show the simple status of the charger. The first status LED is red when input power is present. The second status LED is orange while charging and green when charging is complete and charging has stopped. In addition, the LCD display will read "End" when the charge cycle completes in a normal manner. "End" in LCD display tells you that the battery reached normal "fully charged" voltage and that the current acceptance rate dropped to less than 900mA in a normal amount of time. It features an LCD display with a wealth of battery status information. Battery voltage, charging amperage, State of Charge, Amp-hours charged, time on the charger, and more can all be viewed from the LCD display. This 1008 16V 15A Lithium Ion Racing Battery Charger is universal voltage meaning that it accepts anything from 110VAC~240VAC @ 50~60Hz. (USA power cords included.) It is fused protected with a 6.3A 5mm x 20mm fuse installed.

This sophisticated battery charger is a perfect choice for any of our 12V offerings. With a 25A charge rate, your racing batteries will be charged in no time. Great for topping off between rounds, or simply making sure your battery is 100% full before use. -- 1015A 16V 25A Lithium Ion Racing Battery Charger is purpose built for Lithium Pros 16V Lithium Ion Racing batteries. It is a light weight, high frequency type charger for rapid charging 16V batteries made with Lithium Iron Phosphate cells. The 25A of output typically recharges Lithium Pros 16V Lithium Ion Racing batteries in 12 minutes or less after a typical 1/4 mile drag racing pass. (Actual recharge time varies by specific application and energy consumed.) High frequency chargers like the 1015A 16V 25A Lithium Ion Racing Battery Charger offer very consistent and smooth output voltage extending the life of your battery. It is 6 lbs and connects to the battery with alligator clips. These can be removed and quick disconnects of the racer's choice can be installed. (Please insure any connectors are tightly crimped and soldered onto the output wires from the charger. Carefully observe polarity.) The 1015A 16V 25A Lithium Ion Racing Battery Charger is fully automatic and fan cooled. Simply connect the charger and the internal sensing circuitry will auto detect the battery. Once the battery is detected in five seconds or less, charging will start. The single LED show the simple status of the charger. This status LED is blue while charging. It will change to green when charging is complete and the charger has stopped. This LED will turn red if the charger is connected in reverse polarity or short circuited. It features a soft start mode in which the charger will reduce current flow if the battery is at a very low state of charge. Once the battery voltage has risen, normal fast charging will resume. This is a great feature to protect and prolong the life of your lithium ion battery. It features an LCD display which alternates between battery voltage and charging amperage. This 1015A 16V 25A Lithium Ion Racing Battery Charger is universal voltage meaning that it accepts anything from 90VAC~264VAC @ 45~65Hz. (USA power cords included.) It consumes 7A of AC power max.

This is the standard Shore Charger for the 36V M-series marine batteries. After a full day of fishing, simply connect the charger and let it work. With the 18A charge rate, your batteries will be ready to use again in a matter of hours. -- 1016A 36V 18A Lithium Ion Marine Battery Charger is purpose built for Lithium Pros 36V Lithium Ion Marine batteries. It is a light weight, high frequency type charger for rapid charging 36V Lithium Iron Phosphate batteries. The 18A of output typically recharges Lithium Pros 36V Lithium Ion Marine batteries in 2 1/2 hours. (Actual recharge time varies by specific application and energy consumed.) High frequency chargers like the 1016A 36V 18A Lithium Ion Marine Battery Charger offer very consistent and smooth output voltage extending the life of your battery. It is 6 lbs and connects to the battery with alligator clips. It is make for dry location/shore use and does not mount in the boat. The 1016A 36V 18A Lithium Ion Marine Battery Charger is fully automatic and fan cooled. Simply connect the charger and the internal sensing circuitry will auto detect the battery. Once the battery is detected in five seconds or less, charging will start. The single LED show the simple status of the charger. This status LED is blue while charging. It will change to green when charging is complete and the charger has stopped. This LED will turn red if the charger is connected in reverse polarity or short circuited. It features a soft start mode in which the charger will reduce current flow if the battery is at a very low state of charge. Once the battery voltage has risen, normal fast charging will resume. This is a great feature to protect and prolong the life of your lithium ion battery. It features an LCD display which alternates between battery voltage and charging amperage. This 1016A 36V 18A Lithium Ion Marine Battery Charger is universal voltage meaning that it accepts anything from 90VAC~264VAC @ 45~65Hz. (USA power cords included.) It consumes 7A of AC power max.

1018 24V 10A Lithium Ion Battery Charger is purpose built for Lithium Pros 24V Lithium Ion Marine batteries. It is a light weight, high frequency type charger for rapid charging 24V batteries made with Lithium Iron Phosphate cells. The 10A of output typically recharges Lithium Pros 24V Lithium Ion batteries in 4~6 hours. (Actual recharge time varies by specific application and energy consumed.) High frequency chargers like the 1018 24V 10A Lithium Ion Battery Charger offer very consistent and smooth output voltage extending the life of your battery. It is 3 lbs and connects to the battery with alligator clips. The 1018 24V 10A Lithium Ion Battery Charger is fully automatic and fan cooled. Two LEDs show the simple status of the charger. The first status LED is red when input power is present. The second status LED is orange while charging and green when charging is complete and charging has stopped. In addition, the LCD display will read "End" when the charge cycle completes in a normal manner. "End" in LCD display tells you that the battery reached normal "fully charged" voltage and that the current acceptance rate dropped to less than 900mA in a normal amount of time. It features an LCD display with a wealth of battery status information. Battery voltage, charging amperage, State of Charge, Amp-hours charged, time on the charger, and more can all be viewed from the LCD display. This 1018 24V 10A Lithium Ion Battery Charger is universal voltage meaning that it accepts anything from 110VAC~240VAC @ 50~60Hz. (USA power cords included.) It is fused protected with a 6.3A 5mm x 20mm fuse installed.

1024A 24V 25A Lithium Ion Marine Battery Charger is purpose built for Lithium Pros 24V Lithium Ion Marine batteries. It is a light weight, high frequency type charger for rapid charging 24V batteries made with Lithium Iron Phosphate cells. The 25A of output typically recharges Lithium Pros 24V Lithium Ion Marine batteries in 2 1/2 hours. (Actual recharge time varies by specific application and energy consumed.) High frequency chargers like the 1024A 24V 25A Lithium Ion Marine Battery Charger offer very consistent and smooth output voltage extending the life of your battery. It is 6 lbs and connects to the battery with alligator clips. It is make for dry location/shore use and does not mount in the boat. The 1024A 24V 25A Lithium Ion Marine Battery Charger is fully automatic and fan cooled. Simply connect the charger and the internal sensing circuitry will auto detect the battery. Once the battery is detected in five seconds or less, charging will start. The single LED show the simple status of the charger. This status LED is blue while charging. It will change to green when charging is complete and the charger has stopped. This LED will turn red if the charger is connected in reverse polarity or short circuited. It features a soft start mode in which the charger will reduce current flow if the battery is at a very low state of charge. Once the battery voltage has risen, normal fast charging will resume. This is a great feature to protect and prolong the life of your lithium ion battery. It features an LCD display which alternates between battery voltage and charging amperage. This 1024A 24V 25A Lithium Ion Marine Battery Charger is universal voltage meaning that it accepts anything from 90VAC~264VAC @ 45~65Hz. (USA power cords included.) It consumes 7A of AC power max.

For use with LiFePO4 chemistry 14.6V output at 17A With LCD display Fully automatic Dry location use only This 1011 14.6V 17A Lithium Ion Battery Charger is perfect for Lithium Pros 12.8V Lithium Iron Phosphate Marine batteries. Its high-frequency technology offers reliable output voltage to ensure a longer battery life. It weighs 3 lbs, features an LCD display, and comes with alligator clips and USA power cords. It is also fully automatic, fan cooled, and has two LED indicators to show charging status. Plus, its universal voltage of 110VAC~240VAC @ 50~60Hz makes it suitable for a range of applications. What's more, it has a 6.3A 5mm x 20mm fuse to ensure safety.