Audio Control Accessories

Today’s factory systems include more Class D amplifier technology which can mute, distort or emit damaging frequencies to your new aftermarket audio equipment when the factory speakers are removed. Using carefully selected resistors and a Zobel Network, the AC-LGD has been designed to generate load and stabilize signals from the factory system to ensure the best possible audio.The LGDs come in pairs and can be easily connected to your AudioControl Factory System Upgrade product with pre-wired connectors. The LGD is installed between the factory speaker outputs and your line output converter or speaker level inputs on your amp or processor. Each LGD pair comes with standard wire colors for front and rear connections. User Manual SPECIFICATIONS WEIGHT & DIMENSIONS Dimensions (without wires/connectors): 2.3″L x 1.0″W x .06″H Dimensions (with wires/connectors): 9.75″L x 1.0″D x .06″H Weight (single LGD): 1.4oz (39g) IN THE BOX: One pair of Load Generating Devices (LGDs)

IDEAL FOR OEM NON-AMPLIFIED (NO EXTERNAL AMPLIFIER) DODGE®, CHRYSLER®, JEEP®, MASERATI® SOUND SYSTEMSToday’s factory amplifiers feature built-in protection circuits that can mute some or all audio outputs when the factory speakers are removed. The AC-LGD 20 has been designed to generate load and stabilize signal from the amplified factory system to ensure the best possible audio.The AC-LGD 20s come in pairs and can be easily connected to your AudioControl Factory System Upgrade product with pre-wired connectors. The AC-LGD 20 is installed between the factory speaker outputs and your line output converter or speaker level inputs on your amp or processor. Each AC-LGD 20 pair comes pre-wired with EIA standard wire colors for front and rear connections. User Manual SPECIFICATIONS GENERAL Maximum Input Voltage: 15 Vrms (50 watts) Input Impedance: 20 Ohms WEIGHT & DIMENSIONS Dimensions (without wires/connectors): 2.3″L x 1.0″W x .06″H Dimensions (with wires/connectors): 9.75″L x 1.0″D x .06″H Weight (single LGD): 1.4oz (39g) IN THE BOX: One pair of prewired AC-LGD 20s

IDEAL FOR OEM PREMIUM AMPLIFIED DODGE®, CHRYSLER®, JEEP®, MASERATI® SOUND SYSTEMSToday’s factory amplifiers feature built-in protection circuits which can mute some or all audio outputs when the factory speakers are removed. The AC-LGD 60 has been designed to generate load and stabilize signals from the amplified factory system to ensure the best possible audio.The AC-LGD 60s come in pairs and can be easily connected to your AudioControl Factory System Upgrade product with pre-wired connectors. The AC-LGD 60 is installed between the factory speaker outputs and your line output converter or speaker level inputs on your amp or processor. Each AC-LGD 60 pair comes pre-wired with EIA standard wire colors for front and rear connections. User Manual SPECIFICATIONS GENERAL Maximum Input Voltage: 25 Vrms (150 watts) Input Impedance: 60 Ohms WEIGHT & DIMENSIONS Dimensions (without wires/connectors): 2.3″L x 1.0″W x .06″H Dimensions (with wires/connectors): 9.75″L x 1.0″D x .06″H Weight (single LGD): 1.4oz (39g) IN THE BOX: One pair of pre-wired AC-LGD 60s

The ACR-1 adds precise remote level control to your AudioControl product so you can dial in the perfect level right from the drivers seat. This is also the replacement remote for The Epicenter®. (See below for full list of compatible products) Comes with a 20' remote cable and metal housing with integrated mounting tabs (removable for custom flush mount installations). User ManualCompatible With: ACM-1.300 ACX-300.1 ACX-600.1 ACX-650.5 The Epicenter® Concert Series (plus all Limited & Special Editions) LC2i LC2i Pro LC5i Pro LC6i LC7i LC7i Pro Matrix Plus LC-1.800 LC-1.1500 LC-4.800 LC-5.1300 LC-6.1200 A800.1 A1500.1 A600.4 A1100.5 Legacy Products Supported: LC6 LC8 Overdrive Plus 6XS Original Epicenter® (bypass not supported) WEIGHT & DIMENSIONS Dimensions: 1.75”W x 2.5”D x 1.0”H Weight: 2.3oz (65.2g) IN THE BOX: ACR-1, Remote Cable

Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the LC8i, DQ-61, and DQDX. Comes with a 20 foot cable and removable mounting enclosure (for custom dash installations). User Manual CompatibilityLC8i 8-channel line converterDQ-61 factory sound processorDQDX digital signal processorD-4.800 4-channel amp and DSPD-6.1200 6-channel amp and DSPDM-608 digital signal processorDM-810 digital signal processor WEIGHT & DIMENSIONS Dimensions: 1.75”W x 2.5”D x 1.0”H Weight: 2.3oz (65.2g) IN THE BOX: ACR-3, Remote Cable

Add remote subwoofer level and EPICENTER effect control to your AudioControl EPICENTER Micro or EPICENTER Micro PRO. This dual-concentric design allows control of both your overall subwoofer level (inner/smaller knob) and EPICENTER effect level (outer/larger knob). Comes with a 20' remote cable and metal mounting enclosure (removable for custom flush mount installations). Please note that The EPICENTER Micro and The EPICENTER Micro PRO include the ACR-4 when originally purchased, so the ACR-4 is designed as a replacement product only. User Manual COMPATIBLE WITH The EPICENTER® Micro The EPICENTER® Micro PRO WEIGHT & DIMENSIONS Dimensions: 1.75”W x 2.5”D x 1.0”H Weight: 2.3oz (65.2g) IN THE BOX: ACR-4, Remote Cable

The ACR-E dash remote knob is for AudioControl EPIC Series amplifiers only. Includes cable, remote, and screws.

The ACR-U is a universal remote level control that can be inserted into any line-level signal path. The ACR-U can be surface or custom-mounted to add subwoofer level control, zone level control, total system volume control, and more to your audio system. Installation is simple and no power is required.Included is a half-meter Cat5e cable. Any Cat5e cable up to 300 feet in length may be used. This means the ACR-U Remote can be mounted far from the ACR-U Hub and all RCA connections can remain short, ensuring low noise and excellent signal integrity. FEATURES Precise and tactile remote level control for any application Add volume control to line level sources Remote can be mounted up to 300 feet from hub SPECIFICATIONS INPUTS Line Level Inputs: 1 (2 channels) OUTPUTS Line Level Outputs: 1 (2 channels) PERFORMANCE Insertion Loss: 0.017 dB Attenuation Range: -97 dB WEIGHT & DIMENSIONS Dimensions: Remote: 1.75”W x 2.0”D x 1.0”H Hub (including RCA jacks): 3.2″W x 2.1″D x 1.0″H Weight: 2.3oz (65.2g) IN THE BOX: ACR-U Remote, ACR-U Hub, 0.5 Meter Cat5e Cable, User Manual, Warranty

The AudioControl ACX-BT1 is the ultimate solution for giving your audio system Bluetooth connectivity. The ACX-BT1 features the latest Bluetooth 4.1 and aptX HD support, delivering 24-bit clarity, lower noise, faster initial connection and more reliable streaming from a greater distance. The ACX-BT1 is IPX5 rated for marine and motorsports applications, so it will withstand the rigors of all-weather conditions, including as a standalone (no head unit) solution common to side-by-sides, jet skis and more. Installers will appreciate the unique remote turn-on output circuit that triggers downstream amplifier(s) only when audio is being played over the Bluetooth connection. FEATURES High Definition Low-Latency Audio Streaming aptXTM HD Support 24 bit / 48 kHz Audio Streaming from Devices with aptX Codec IPX5 rated enclosure Built in fuse SPECIFICATIONS Bluetooth Version: 4.1 aptX HD Compatible OUTPUT Dual Line Level RCA Nominal Output Level: 1.5 Vrms PERFORMANCE Signal to Noise Ratio: 95 dB Maximum Data Rate: 3 Mbps (typical 1.6 Mbps) Operating Range: 10+ meters (depending on environment) GENERAL Current Draw: 35 mA Fuse Rating: 2 A WEIGHT & DIMENSIONS Dimensions (enclosure): 2.0”L x 2.5”W x 0.7”H Weight: 0.2 lbs. (91 g) IN THE BOX: ACX-BT1, Warranty, User Manual

The ACX-BT3 is an all-weather Bluetooth® receiver and 3-zone controller designed for the rigors of marine and powersports applications. Beyond an ordinary Bluetooth® receiver, the ACX-BT3 features three stereo RCA outputs and is a zone controller, providing quick access to volume control over 3 separate zones at the touch of a button. With the added flexibility of an auxiliary input, the ACX-BT3 is the perfect solution as a primary or secondary source for any audio system. aptX™ HD support coupled with robust 4 Vrms outputs provides the best possible audio quality. Integrated mounting holes allow for easy custom installation to a dashboard, or other flat panel in a car, side-by-side, boat, or vehicle of your choice. And the all-weather ACX-BT3 is IPX6 rated against splashes, wind and spray, ensuring your music will play on wherever your next adventure takes you. FEATURES High Definition Low-Latency Audio Streaming aptXTM HD Support 24 bit / 48 kHz Audio Streaming from Devices with aptX Codec IPX6 rated enclosure Built in fuse SPECIFICATIONS Bluetooth Version: 5.1 aptX HD Compatible OUTPUT Preamp Outputs: 3 (6 channels) Maximum Output Level: 4 Vrms PERFORMANCE Signal to Noise Ratio: 95 dB Maximum Data Rate: 3 Mbps (typical 1.6 Mbps) Operating Range: 10+ meters (depending on environment) GENERAL Current Draw: 100 mA Fuse Rating: 2 A WEIGHT & DIMENSIONS Dimensions (enclosure): 2.51″L x 2.51″L x 3.17″D Weight: 0.43 lbs. (194 g) IN THE BOX: ACX-BT3, Mounting Screws, Warranty, User Manual

Building from a legacy of trusted professional audio measurement products, the DM-RTA™ brings the vital tools you rely on to one indispensable interface. Populated with every connector we could think of, and coupled with the new DM-RTA app, AudioControl’s DM-RTA helps you take your car audio, marine audio or home theater installations to new levels of perfection and control.The DM-RTA connects to a Mac or PC via USB, or to a phone or tablet via Bluetooth using the AC-BT24 Bluetooth Streamer/Programmer (available separately).The RTA (real-time analyzer) takes electrical and acoustical measurements. This will let you know how much equalization is needed to smooth out the frequency response of a vehicle. The sound pressure level (SPL) is used to show how loud the audio system can perform. This is something every customer would love to know and a way to test the before and after performance of a system. DM-RTA APP The DM-RTA isn’t just an RTA. Accessible from the DM-RTA app are five modules, including Voltage Meter, RTA (1/3, 1/6, and 1/12 octave), SPL Meter, Polarity Checker and a fully functional Oscilloscope. Test and measure nearly every signal imaginable from acoustical, to line level, and speaker level. Balanced and unbalanced line level inputs allow the DM-RTA to be inserted into your signal chain to verify optimal signal from source to speakers. This is the last test tool you’ll ever need. DM-RTA App for Mac & PC DM-RTA App via App store for iOS & Android User Manual FEATURES Test and Measure Any Signal Balanced Line Level Inputs and Outputs Unbalanced Line Level Inputs and Outputs Speaker Level Inputs (handles up to 400 watts) Microphone Input with 48V Phantom Power (microphone sold separately) Microphone presets (for CM-20, CM-10 & C550H) Digital and USB Outputs Connect to PC/Mac, Phone or Tablet Option Port for Bluetooth Connectivity Battery Powered and Compact for Portability DM-RTA app available in downloads for Mac/PC SPECIFICATIONS INPUTS 1 x Balanced (In

The LC1i joins ranks with AudioControl’s most popular active line output converter, the LC2i. Adding a sub? Planning a full system? Either way, get the best possible signal from your factory sound system to your amplifiers. Load selection switches mean OEM integration has never been easier and the LC1 will work with the most finicky factory sound systems. Installer friendly turn on trigger modes allow for flexibility via GTO™ Signal Sense (DC offset), audio sense, or remote 12 volt inputs. For future head unit upgrades, the LC1i is also a line driver and can remain in the system to provide optimal preamp signal. FEATURES Two channels of active speaker level inputs (up to 40V input handling) Two channels of line level inputs Load Selection Switch GTOTM Signal Sensing Ground Isolation Switch Compact design SPECIFICATIONS INPUTS Speaker Level Input: 1 (2 channels) Maximum Speaker Level Input: 40 Vrms / 400 W (20kΩ setting) Speaker Level Input Impedance (selectable): 20Ω, 60Ω, 20kΩ Line Level Input: 1 (2 channels) Line Level Input Impedance: 7kΩ OUTPUTS Preamp Outputs: 1 (2 channels) Maximum Output Level: 9.5Vrms/13V peak Output Gain: +/- 12 dB Output Impedance: 150Ω PERFORMANCE Total Harmonic Distortion: 0.01% Signal to Noise: >110 dB Frequency Response: 20 Hz – 50 kHz ±1 dB CONTROL Remote In / GTO™ Signal Sense / Audio Sense 12VDC Remote Out (always active when unit is on) GENERAL Current Draw: 120 mA Recommended Fuse Rating: 1 A WEIGHTS & DIMENSIONS Dimensions: 4.8″L x 3″D x 1″H (including speaker connectors) Weight: 0.55 lbs. (0.25 kg) IN THE BOX: LC1i, Speaker and Power connectors, Manual, Warranty

The LC2i, is a compact, two-channel processor with active input circuitry, which allows it to accept speaker-level signals of up to 400 watts per channel from factory-installed source units or amplifiers. It converts them to high-quality pre-amp signals that can then be directed to after-market processors and/or amplifiers. Users can enjoy maximum sound quality while maintaining the use of factory volume and steering wheel controls. FEATURES Two channels of Active speaker level inputs – Accepts 400 watt signals per channel Fixed and variable outputs with discrete level controls AccuBASS® processing for correction of bass roll-off GTOTM Signal Sensing Input For Optional Remote Level Control Compact design SPECIFICATIONS INPUTS Speaker Level Input: 1 (2 channels) Maximum Speaker Level Input: 400W per channel at 4Ω Input Impedance: 20kΩ OUTPUTS Preamp Outputs: 2 (2 channels main, 2 channels bass) Maximum Output Level: 9.5Vrms/13V peak Output Impedance: 150Ω PERFORMANCE Total Harmonic Distortion: 0.01% Signal to Noise: >110 dB Frequency Response: 33 Hz – 100 kHz ±1 dB CONTROL Remote In 12VDC Remote Out (always active when unit is on) ACR-1 Remote Control (Optional) GENERAL Current Draw: 150mA Recommended Fuse Rating: 1A WEIGHTS & DIMENSIONS Dimensions: 5.4″L x 3.25″D x 1.5″H (6.5″L including mounting brackets) Weight: 1.0lbs (0.5kg) IN THE BOX: LC2i, Speaker and Power connectors, Manual, Warranty

The LC2i PRO join ranks with AudioControl’s most popular active line output converter, the LC2i. Adding a sub? Planning a full system? Either way, get the best possible signal from your factory sound system to your amplifiers. Load selection switches mean OEM integration has never been easier and the LC2i PRO will work with the most finicky factory sound systems. Installer friendly turn on trigger modes allow for flexibility via GTO™ Signal Sense (DC offset), audio sense, or remote 12 volt inputs. Compensate for factory bass roll-off with AudioContol’s patented AccuBASS® and control your sub with the included ACR-1 level control. FEATURES Two channels of active speaker level inputs (up to 40V input handling) Fixed and variable outputs with discrete level controls AccuBASS® processing for correction of bass roll-off Load Selection Switch GTOTM Signal Sensing Ground Isolation Switch ACR-1 dash remote inluded Compact design SPECIFICATIONS INPUTS Speaker Level Input: 1 (2 channels) Maximum Speaker Level Input: 40 Vrms / 400 W (20kΩ setting) Input Impedance (selectable): 20Ω, 60Ω, 20kΩ OUTPUTS Preamp Outputs: 2 (2 channels main, 2 channels bass) Maximum Output Level: 9.5Vrms/13V peak Output Gain: +/- 12 dB Output Impedance: 150Ω PERFORMANCE Total Harmonic Distortion: 0.01% Signal to Noise: >110 dB Frequency Response: 20 Hz – 50 kHz ±1 dB CONTROL Remote In / GTO™ Signal Sense / Audio Sense 12VDC Remote Out (always active when unit is on) GENERAL Current Draw: 200 mA Recommended Fuse Rating: 1 A WEIGHTS & DIMENSIONS Dimensions: 6.9″L x 3″D x 1″H (including speaker connectors) Weight: 0.75 lbs. (0.34 kg) IN THE BOX: LC2i PRO, ACR-1, 20′ Phone Cable, Speaker and Power connectors, Manual, Warranty

AudioControl brings you our most advanced line of LOCs yet. OEM integration has never been easier with the host of intelligent built-in features like LMC™ (Load Matching Circuit), allowing even the most finicky factory sound systems to no longer be an obstacle to great sound. Installer-friendly trigger modes offer flexibility and an expedited installation time since the units can be turned on via GTO™ Signal Sense (DC offset), audio signal sensing, or standard remote 12 volt input. All PRO series products feature AudioContol’s patented AccuBASS® for restoring low frequency output diminished by factory processing, and an ACR-1 level control is included to dial in the perfect level for your subwoofer right from the comfort of the driver’s seat. The Pro series ensures that you will start with the clean, powerful signal you need to take your system from sounding good to sounding great. FEATURES Four channels of active speaker-level inputs (up to 40V input handling) Fixed and variable outputs with discrete-level controls AccuBASS® processing for correction of bass roll-off Load Selection Switch GTOTM Signal Sensing Ground Isolation Switch ACR-1 dash remote included Compact design SPECIFICATIONS INPUTS Speaker Level Input: 1 (4 channels) Maximum Speaker Level Input: 40 Vrms / 400 W (20kΩ setting) Input Impedance (selectable): 20Ω, 60Ω, 20kΩ OUTPUTS Preamp Outputs: 5 (4 channels main, 1 channels bass) Maximum Output Level: 9.5Vrms/13V peak Output Gain: +/- 15 dB Output Impedance: 150Ω PERFORMANCE Total Harmonic Distortion: 0.01% Signal to Noise: >124 dB Frequency Response: 20 Hz – 20 kHz CONTROL Remote In / GTO™ Signal Sense / Audio Sense 12VDC Remote Out (always active when unit is on) GENERAL Current Draw: 330 mA Recommended Fuse Rating: 2 A WEIGHTS & DIMENSIONS Dimensions: 7″L x 5.1″D x 1.14″H (including speaker connectors) Weight: 1.1 lbs. IN THE BOX: LC5i PRO, ACR-1, 20′ Phone Cable, Speaker and Power connectors, Manual, Warranty

The AudioControl LC7i, six channel active line converter, allows all music lovers, who want a great in-car audio experience, to keep their factory installed source unit and dramatically improve their system performance. The LC7i delivers amazing sound quality and fixes one of the biggest letdowns of today’s factory systems, weak BASS! Designed for maximum sound quality and enhanced audio performance, the LC7i incorporates AccuBASS™. This patented process automatically corrects for the bass roll-off that is common with many factory-installed audio systems and AudioControl’s unique and exclusive AccuBASS™ circuitry maintains and restores the Bass as the volume is turned up, improving the audio performance. The LC7i allows the flexibility of powering the audio signals downstream to single or multiple factory amps maximizing sound quality & achieving high output at a great price. In addition, the LC7i is designed to fit into a compact chassis allowing an easy & flexible factory system upgrade in today’s space constrained vehicles. The ACR-1 dash remote (sold separately) allows the user to control the level of the low frequency output. FEATURES Six channels of active speaker level inputs – accepts up to 400 watts per channel Patent Pending AccuBASS™ circuitry Optional ACR-1 Remote allows for user control of the subwoofer level Internal Channel Summing – For interfacing with factory installed amplifiers with built-in crossovers GTO™ (Great Turn-On) Circuit – Powers up the LC7i when it detects signal on the speaker level input Output level control Compact chassis allowing for ease of installation SPECIFICATIONS INPUTS Speaker Level Inputs: 3 (6 channels) Maximum Input (speaker level): 400W per channel at 4Ω Input Impedance: 20kΩ OUTPUTS Preamp Outputs: 3 (6 channels) Maximum Output Level: 8.5Vrms Output Gain: ±12dB Output Impedance: 150Ω PERFORMANCE Total Harmonic Distortion: 0.01% Frequency Response: 10Hz-22kHz CONTROL Remote In 12VDC Remote Out (always active when unit i

AudioControl brings you our most advanced line of LOCs yet. OEM integration has never been easier with the host of intelligent built-in features like LMC™ (Load Matching Circuit), allowing even the most finicky factory sound systems to no longer be an obstacle to great sound. Installer-friendly trigger modes offer flexibility and an expedited installation time since the units can be turned on via GTO™ Signal Sense (DC offset), audio signal sensing, or standard remote 12 volt input. All PRO series products feature AudioContol’s patented AccuBASS® for restoring low frequency output diminished by factory processing, and an ACR-1 level control is included to dial in the perfect level for your subwoofer right from the comfort of the driver’s seat. The Pro series ensures that you will start with the clean, powerful signal you need to take your system from sounding good to sounding great. FEATURES Six channels of active speaker-level inputs (up to 40V input handling) Fixed and variable outputs with discrete-level controls AccuBASS® processing for correction of bass roll-off Load Selection Switch GTOTM Signal Sensing Ground Isolation Switch ACR-1 dash remote included Compact design SPECIFICATIONS INPUTS Speaker Level Input: 3 (6 channels) Maximum Speaker Level Input: 40 Vrms / 400 W (20kΩ setting) Input Impedance (selectable): 20Ω, 60Ω, 20kΩ OUTPUTS Preamp Outputs: 6 (4 channels main, 2 channels bass) Maximum Output Level: 9.5Vrms/13V peak Output Gain: +/- 15 dB Output Impedance: 150Ω PERFORMANCE Total Harmonic Distortion: 0.01% Signal to Noise: >124 dB Frequency Response: 20 Hz – 20 kHz CONTROL Remote In / GTO™ Signal Sense / Audio Sense 12VDC Remote Out (always active when unit is on) GENERAL Current Draw: 330 mA Recommended Fuse Rating: 2 A WEIGHTS & DIMENSIONS Dimensions: 7″L x 5.1″D x 1.14″H (including speaker connectors) Weight: 1.15 lbs. IN THE BOX: LC7i PRO, ACR-1, 20′ Phone Cable, Speaker and Power connectors, Manual, Warranty

Experience audio excellence from your existing factory audio system with the AudioControl LC8i 8-Channel Line Output Converter. This powerful converter is the ultimate solution for upgrading your car's audio system. It features channel summing for an immersive audio experience and is compatible with almost any factory stereo. With RCA auxiliary input jacks and a wired remote for complete control, connecting external audio sources has never been easier. Built to last and easy to install, this converter ensures you have the best audio quality possible. Upgrade your sound today with the AudioControl LC8i 8-Channel Line Output Converter. FEATURES Speaker Input: Compatible with most factory stereo systems, four pairs of inputs handling up to 400 watts per channel. Channel Summing: Sum together multiple input channels (4, 6, or 8) for a high-quality, full-range pre-amp signal without additional cables or hardware. AutoMode Inputs: Channel 3 input automatically feeds channel three and channel 4 outputs when there is no signal at the channel four input. Auxiliary Input: Pair of RCA auxiliary input jacks for connecting secondary sources like iPod or satellite radio, controlled using the wired remote. Output Level: +/- 12 dB adjustment for each RCA output, allowing you to match the level of speaker level inputs. Separate output level control for auxiliary input. Auto Turn-on: Signal sensing circuit turns on the unit when there's a speaker-level input signal and turns off when the signal disappears. Remote Output: +12 volt DC remote output triggers the amp to turn on when LC8i is on, with a maximum current output of 1 amp. Remote: The wired remote allows easy source selection, auxiliary input volume adjustment, and output level control for channel 4/subwoofer. Ground Isolation: Switchable power supply ground for eliminating ground loop noise. Terminal Blocks: Removable terminal blocks for power/ground/remote connections and speaker level inputs, accommodating wire up to 12 gau

AudioControl created the MATRIX PLUS six channel line driver with one goal in mind, to make your car audio system sound better. Modern car stereos boast many features but in many cases rather low pre-amp outputs, especially at low levels. Turn your stereo to a normal volume level, send the signal through a 20-foot cable, and your amps may end up with very little audio signal resulting in weak sound. Equipped with 24 dB of gain, which can increase pre-amp signal levels up to 9.5 volts RMS/13 volts peak, the MATRIX PLUS line driver will transform your audio system. When integrating multi-media and video games or for driving dozens of amplifiers the MATRIX PLUS line driver gives your system a boost. With multiple sources, like video, the MATRIX PLUS level matches the different volume levels so switching between them is seamless. For SPL vehicles, the internal linking system of the Matrix means that two channels of input can drive all six outputs and each output can drive up to seven amplifiers. The MATRIX PLUS line driver features an optional dash control input which facilitates remote control of pre-amp signal levels. This makes the MATRIX PLUS line driver an ideal controller for overall system master volume or subwoofer levels. Let the AudioControl’s MATRIX PLUS put your system into high gear. User Manual Configuration Guide FEATURES High signal voltage capability: 13 volts peak output 24dB of gain Six channels of input and output Balanced differential inputs Low-impedance outputs Optional Remote Level Control (ACR-1) PFM Subsonic filter Output level controls Ultra-low distortion, ultra-quiet operation Selectable ground isolation Optimum voltage indicator LED’s Conformally Coated PCB for Increased Resistance to the Elements SPECIFICATIONS INPUTS Preamp Inputs: 3 (6 channels) Input Gain: 24dB Input Impedance: 20kΩ OUTPUTS Preamp Outputs: 3 (6 channels) Maximum Output Level: 9.5Vrms Output Gain: -12dB to +24dB Output Impedance: 50Ω PERFORMANCE Total Harmonic Distortion

Easily create a 3-way speaker system by adding PNW-27 to either PNW-65CS2 or PNW-69CS2. Configurable from 2, 4 or 6 channels of input. COMPATIBLE WITH PNW-65CS2 PNW-69CS2 PNW-275

The PNW-XN3 is a 3-way passive crossover network designed to expand an existing 2-way component speaker system into a full 3-way setup by adding a dedicated midrange driver to your midbass and tweeter combination. It is an ideal solution when active crossovers or a DSP are not available or simply do not fit the budget.   Compatible with both AudioControl PNW and Altitude series speakers, the PNW-XN3 simplifies system design and installation by combining all crossover functions into a single network. This eliminates the need for separate crossovers for each individual driver, reducing wiring complexity and saving valuable installation time. Only one PNW-XN3 is required per complete 3-way front stage, supporting a total of six speakers.   When supplied with a full-range signal, the PNW-XN3 accurately divides frequencies and routes them to the appropriate drivers:   • Midbass frequencies to 6.5-inch or 6×9-inch woofers (WF outputs) • Midrange frequencies to 2.75-inch or 3.5-inch midrange speakers (MD outputs) • High frequencies to tweeters (TW outputs)   The flexible input section allows the PNW-XN3 to deliver six channels of output whether it is fed by 2, 4, or 6 channels of input. As a fully passive crossover network, it requires no power, ground, or turn-on connections, further streamlining installation and improving reliability.   Compatible speaker combinations: • PNW-65CS2 + PNW-275 • PNW-69CS2 + PNW-275 • A65CS2 + A275C • A65CS2 + A35C • A69CS2 + A275C • A69CS2 + A35C

The EPICENTER Micro combines AudioControl’s legendary digital bass restoration with world-renowned OEM integration capabilities. Featuring a speaker-level input stage with selectable impedance loads, as well as traditional line-level inputs, The EPICENTER Micro brings out the best bass in any system. Trigger modes include traditional +12V remote in, GTO™ Signal Sense, and Audio Sense. The PFM Subsonic Filter can be bypassed for the truly dedicated, and the 10V+ output voltage setting beckons only the bravest among us. Use the included ACR-4 remote to independently adjust bass restoration and output level. FEATURES Patented Digital Bass Restoration ParaBASS® Bass Shaping Speaker and Line Level Inputs Load Matching Circuit Multiple Trigger Modes ACR-4 Dual Knob Dash Mount Control Included Conformally Coated PCB for Increased Resistance to the Elements SPECIFICATIONS INPUTS Speaker Level Input: 1 (2 channels) Maximum Speaker Level Input: 40 Vrms / 400 W (20kΩ setting) Speaker Level Input Impedance (selectable): 20Ω, 60Ω, 20kΩ Line Level Input: 1 (2 channels) Line Level Input Impedance: 7kΩ OUTPUTS Preamp Outputs: 1 (2 channels) Maximum Output Level: 9.5Vrms/13V peak Output Impedance: 150Ω PERFORMANCE Total Harmonic Distortion: 0.03% Signal to Noise: >105 dB Frequency Response: 10 Hz – 22 kHz ±1 dB CONTROL Remote In / GTO™ Signal Sense / Audio Sense 12VDC Remote Out (always active when unit is on) GENERAL Current Draw: 300 mA Recommended Fuse Rating: 1 A WEIGHTS & DIMENSIONS Dimensions: 5.9″L x 3″D x 1″H Weight: 0.6 lbs. (0.27 kg) IN THE BOX: The Epicenter Micro, ACR-4, Remote Cable, Speaker and Power connectors, Manual, Warranty

Building on the powerful features of The EPICENTER Micro and everything you have come to know and love about AudioControl’s legendary bass processing, The EPICENTER Micro PRO adds more control and tuning potential for those who wish to push even further into the unexplored outer realms of extreme bass performance. Bass Maximizer – The EPICENTER Micro PRO is designed to reproduce low frequency information by looking at the upper frequency ranges and detecting musical harmonics. These harmonics then allow The EPICENTER Micro PRO to drop down a few octaves and reproduce the “missing” bass notes. Line Output Converter - Beyond maximizing bass, The EPICENTER Micro PRO is a line output converter packed with premier OEM integration features like AudioControl’s Load Matching Circuit (LMC) with Load Select, multiple Trigger Modes, and selectable Ground Isolation. For power-users, the PFM Subsonic Filter can be selected or bypassed and Output Voltage can be configured for up to 10 Volts! FEATURES • AudioControl’s Original Digital Bass Restoration Circuit: Restore missing low notes and transform flat audio into rich, powerful bass you can truly feel. • ParaBASS® Controls for Bass Shaping: Precisely sculpt and fine-tune your bass to perfectly match your music, vehicle, and personal preference.• Selectable PFM Subsonic Filter with Bypass: Protect your speakers and ensure tighter, more controlled bass by filtering out inaudible, power-wasting frequencies.• Built-in Line Driver for Optimal Output Voltage: Boosts your audio signal for a strong, clean path to your amplifiers, minimizing noise and maximizing sound quality.• Balanced Line Level Inputs: Helps eliminate electrical interference and hum, delivering crystal-clear sound even in noisy car environments. • Speaker-Level Inputs: Seamlessly integrate a factory stereo without needing RCA outputs, saving money and simplifying upgrades.• Load Selection Switch: Ensures perfect compatibility with modern factory stereos, preventing is

The SA-4140i SPL is a calibrated, full range, omni-directional test and measurement microphone for direct connection to iOS devices running iOS 6.1 or later. Using the AudioControl Mobile Tools app, you will be able to analyze the acoustics of any environment with high resolution and precision, using the processing power of your iPhone®, iPod® touch or iPad®. SA-4140i SPL makes set up of any sound processor a breeze, too, letting you see the acoustical spectrum and take action!SA-4140i SPL features increased max SPL handling – up to 140 dB SPL. With its built in audio output, the SA-4140i SPL is also perfect for iPhone 7. Keep your iOS device charged during extending use by connecting the included AC adapter to the built in charging jack.